| 1. |
- Aamodt, K., et al.
(författare)
-
The ALICE experiment at the CERN LHC
- 2008
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 3:S08002
-
Forskningsöversikt (refereegranskat)abstract
- ALICE (A Large Ion Collider Experiment) is a general-purpose, heavy-ion detector at the CERN LHC which focuses on QCD, the strong-interaction sector of the Standard Model. It is designed to address the physics of strongly interacting matter and the quark-gluon plasma at extreme values of energy density and temperature in nucleus-nucleus collisions. Besides running with Pb ions, the physics programme includes collisions with lighter ions, lower energy running and dedicated proton-nucleus runs. ALICE will also take data with proton beams at the top LHC energy to collect reference data for the heavy-ion programme and to address several QCD topics for which ALICE is complementary to the other LHC detectors. The ALICE detector has been built by a collaboration including currently over 1000 physicists and engineers from 105 Institutes in 30 countries, Its overall dimensions are 16 x 16 x 26 m(3) with a total weight of approximately 10 000 t. The experiment consists of 18 different detector systems each with its own specific technology choice and design constraints, driven both by the physics requirements and the experimental conditions expected at LHC. The most stringent design constraint is to cope with the extreme particle multiplicity anticipated in central Pb-Pb collisions. The different subsystems were optimized to provide high-momentum resolution as well as excellent Particle Identification (PID) over a broad range in momentum, up to the highest multiplicities predicted for LHC. This will allow for comprehensive studies of hadrons, electrons, muons, and photons produced in the collision of heavy nuclei. Most detector systems are scheduled to be installed and ready for data taking by mid-2008 when the LHC is scheduled to start operation, with the exception of parts of the Photon Spectrometer (PHOS), Transition Radiation Detector (TRD) and Electro Magnetic Calorimeter (EMCal). These detectors will be completed for the high-luminosity ion run expected in 2010. This paper describes in detail the detector components as installed for the first data taking in the summer of 2008.
|
|
| 2. |
- Abazov, V. M., et al.
(författare)
-
Evidence for production of single top quarks
- 2008
-
Ingår i: Physical Review D. - 1550-7998 .- 1550-2368. ; D:78, s. 012005-
-
Forskningsöversikt (refereegranskat)abstract
- We present first evidence for the production of single top quarks in the D0 detector at the Fermilab Tevatron p (p) over bar collider. The standard model predicts that the electroweak interaction can produce a top quark together with an antibottom quark or light quark, without the antiparticle top-quark partner that is always produced from strong-coupling processes. Top quarks were first observed in pair production in 1995, and since then, single top-quark production has been searched for in ever larger data sets. In this analysis, we select events from a 0.9 fb(-1) data set that have an electron or muon and missing transverse energy from the decay of a W boson from the top-quark decay, and two, three, or four jets, with one or two of the jets identified as originating from a b hadron decay. The selected events are mostly backgrounds such as W + jets and t (t) over bar events, which we separate from the expected signals using three multivariate analysis techniques: boosted decision trees, Bayesian neural networks, and matrix-element calculations. A binned likelihood fit of the signal cross section plus background to the data from the combination of the results from the three analysis methods gives a cross section for single top-quark production of sigma(p (p) over bar -> tb + X, tqb + X) = 4.7 +/- 1.3 pb. The probability to measure a cross section at this value or higher in the absence of signal is 0.014%, corresponding to a 3.6 standard deviation significance. The measured cross section value is compatible at the 10% level with the standard model prediction for electroweak top-quark production. We use the cross section measurement to directly determine the Cabibbo-Kobayashi-Maskawa quark mixing matrix element that describes the Wtb coupling and find vertical bar V(tb)f(1)(L)vertical bar = 1.31(-0.21)(+0.25), where f(1)(L) is a generic vector coupling. This model-independent measurement translates into 0.68 <= 1 at the 95% C.L. in the standard model.
|
|
| 3. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 4. |
- Christopoulos, Arthur, et al.
(författare)
-
THE CONCISE GUIDE TO PHARMACOLOGY 2021/22: G protein-coupled receptors.
- 2021
-
Ingår i: British journal of pharmacology. - : Wiley. - 1476-5381 .- 0007-1188. ; 178 Suppl 1, s. S27-S156
-
Forskningsöversikt (refereegranskat)abstract
- The Concise Guide to PHARMACOLOGY 2021/22 is the fifth in this series of biennial publications. The Concise Guide provides concise overviews, mostly in tabular format, of the key properties of nearly 1900 human drug targets with an emphasis on selective pharmacology (where available), plus links to the open access knowledgebase source of drug targets and their ligands (www.guidetopharmacology.org), which provides more detailed views of target and ligand properties. Although the Concise Guide constitutes over 500 pages, the material presented is substantially reduced compared to information and links presented on the website. It provides a permanent, citable, point-in-time record that will survive database updates. The full contents of this section can be found at http://onlinelibrary.wiley.com/doi/bph.15538. G protein-coupled receptors are one of the six major pharmacological targets into which the Guide is divided, with the others being: ion channels, nuclear hormone receptors, catalytic receptors, enzymes and transporters. These are presented with nomenclature guidance and summary information on the best available pharmacological tools, alongside key references and suggestions for further reading. The landscape format of the Concise Guide is designed to facilitate comparison of related targets from material contemporary to mid-2021, and supersedes data presented in the 2019/20, 2017/18, 2015/16 and 2013/14 Concise Guides and previous Guides to Receptors and Channels. It is produced in close conjunction with the Nomenclature and Standards Committee of the International Union of Basic and Clinical Pharmacology (NC-IUPHAR), therefore, providing official IUPHAR classification and nomenclature for human drug targets, where appropriate.
|
|
| 5. |
- Shoman, H., et al.
(författare)
-
Gasless laparoscopy versus conventional laparoscopy and laparotomy: A systematic review on the safety and efficiency
- 2023
-
Ingår i: Surgical Practice. - 1744-1625. ; 27:3, s. 171-186
-
Forskningsöversikt (refereegranskat)abstract
- BackgroundGasless laparoscopy (GL) emerged to overcome the clinical and financial challenges of pneumoperitoneum and is often seen as a viable option for use in resource-limited settings as a means of saving costs and resources. This study aims to systematically review the evidence available on the safety and efficiency of GL compared with conventional laparoscopy (CL) and laparotomy. MethodsFollowing the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, Medline, Embase, Web of Science and Cochrane databases were searched. Variables of interest were determined a priori and Covidence software was used to screen studies for inclusion without demographic preference. The quality of studies was assessed using the Cochrane Risk Assessment tool. ResultsOf the 1080 studies screened, a total of 43 studies were included. Laparoscopic cholecystectomy was by far the most studied intervention in randomised studies. In these, the mean setup time for gasless and CL was 13.14 (95% CI -0.16 to 26.44) and 12.8 (95% CI -10.86 to 36.47) minutes, respectively. The mean duration of surgery for gasless and CL was 89.39 (95% CI 77.44 to 101.34) and 72.59 (95% CI 63.44 to 81.74) minutes, respectively, and the mean length of stay was 4.25 (95% CI 2.02 to 6.48) and 4.04 (95% CI 1.72 to 6.36) days, respectively. Most reported complications were haemorrhage and infection with no assessable statistical difference. ConclusionsAlthough GL seems to be a feasible approach for many general surgery interventions, the observed outcomes based on safety and efficiency are not sufficient to recommend GL as an alternative to CL or laparotomy. Larger randomised trials with a low risk of bias are warranted.
|
|
| 6. |
- Genkinger, J. M., et al.
(författare)
-
Central adiposity, obesity during early adulthood, and pancreatic cancer mortality in a pooled analysis of cohort studies
- 2015
-
Ingår i: Annals of Oncology. - : OXFORD UNIV PRESS. - 0923-7534 .- 1569-8041. ; 26:11, s. 2257-2266
-
Forskningsöversikt (refereegranskat)abstract
- positively associated with pancreatic cancer. However, little evidence exists regarding the influence of central adiposity, a high BMI during early adulthood, and weight gain after early adulthood on pancreatic cancer risk. Design: We conducted a pooled analysis of individual-level data from 20 prospective cohort studies in the National Cancer Institute BMI and Mortality Cohort Consortium to examine the association of pancreatic cancer mortality with measures of central adiposity ( e. g. waist circumference; n = 647 478; 1947 pancreatic cancer deaths), BMI during early adulthood ( ages 18- 21 years) and BMI change between early adulthood and cohort enrollment, mostly in middle age or later ( n = 1 096 492; 3223 pancreatic cancer deaths). Multivariable hazard ratios ( HRs) and 95% confidence intervals ( CIs) were calculated using Cox proportional hazards regression models. Results: Higher waist-to-hip ratio ( HR = 1.09, 95% CI 1.02- 1.17 per 0.1 increment) and waist circumference ( HR = 1.07, 95% CI 1.00- 1.14 per 10 cm) were associated with increased risk of pancreatic cancer mortality, even when adjusted for BMI at baseline. BMI during early adulthood was associated with increased pancreatic cancer mortality ( HR = 1.18, 95% CI 1.11- 1.25 per 5 kg/ m2), with increased risk observed in both overweight and obese individuals ( compared with BMI of 21.0 to < 23 kg/ m(2), HR = 1.36, 95% CI 1.20- 1.55 for BMI 25.0 < 27.5 kg/ m2, HR = 1.48, 95% CI 1.20- 1.84 for BMI 27.5 to < 30 kg/ m2, HR = 1.43, 95% CI 1.11- 1.85 for BMI = 30 kg/ m2). BMI gain after early adulthood, adjusted for early adult BMI, was less strongly associated with pancreatic cancer mortality ( HR = 1.05, 95% CI 1.01- 1.10 per 5 kg/ m2). Conclusions: Our results support an association between pancreatic cancer mortality and central obesity, independent of BMI, and also suggest that being overweight or obese during early adulthood may be important in influencing pancreatic cancer mortality risk later in life.
|
|
| 7. |
- Berendt, A R, et al.
(författare)
-
Diabetic foot osteomyetitis: a progress report on diagnosis and a systematic review of treatment
- 2008
-
Ingår i: Diabetes/Metabolism Research & Reviews. - : Wiley. - 1520-7552 .- 1520-7560. ; 24:S1, s. 145-161
-
Forskningsöversikt (refereegranskat)abstract
- The International Working Group on the Diabetic Foot appointed an expert panel to provide evidence-based guidance on the management of osteomyelitis in the diabetic foot. Initially, the panel formulated a consensus scheme for the diagnosis of diabetic foot osteomyelitis (DFO) for research purposes, and undertook a systematic review of the evidence relating to treatment. The consensus diagnostic scheme was based on expert opinion; the systematic review was based on a search for reports of the effectiveness of treatment for DFO published prior to December 2006. The panel reached consensus on a proposed scheme that assesses the probability of DFO, based on clinical findings and the results of imaging and laboratory investigations. The literature review identified 1168 papers, 19 of which fulfilled criteria for detailed data extraction. No significant differences in outcome were associated with any particular treatment strategy. There was no evidence that surgical debridement of the infected bone is routinely necessary. Culture and sensitivity of isolates from bone biopsy may assist in selecting properly targeted antibiotic regimens, but empirical regimens should include agents active against staphylococci, administered either intravenously or orally (with a highly bioavailable agent). There are no data to support the superiority of any particular route of delivery of systemic antibiotics or to inform the optimal duration of antibiotic therapy. No available evidence supports the use of any adjunctive therapies, such as hyperbaric oxygen, granulocyte-colony stimulating factor or larvae. We have proposed a scheme for diagnosing DFO for research purposes. Data to inform treatment choices in DFO are limited and further research is, urgently needed.
|
|
| 8. |
- Hubbe, Martin A., et al.
(författare)
-
Recovery of Inorganic Compounds from Spent Alkaline Pulping Liquor by Eutectic Freeze Crystallization and Supporting Unit Operations : A Review
- 2018
-
Ingår i: BioResources. - : NC State University. - 1930-2126 .- 1930-2126. ; 13:4, s. 9180-9219
-
Forskningsöversikt (refereegranskat)abstract
- After the kraft or soda pulping of lignocellulosic materials to produce pulp suitable for papermaking, the spent pulping liquor typically has been recovered by multi-effect evaporation, followed by incineration in a recovery boiler. This review article considers one unit operation, eutectic freeze crystallization (EFC), that may have potential to save some of the energy that is presently consumed in the evaporation step during recovery of inorganic chemicals from spent pulping liquor. Based on a review of the literature it appears that EFC can be employed to obtain relatively pure sodium sulfate and sodium carbonate, along with relatively pure water (in the form of ice) from the spent liquor, under the assumption that lignin previously has been removed by acidification and precipitation. Issues of inorganic scale formation, during the operation of an EFC process applied to lignin-free black liquor, will require research attention. The chemical reactions to regenerate the active pulping chemicals sodium hydroxide and sodium sulfide from sodium carbonate, sodium sulfate, and other compounds isolated by EFC can be carried out either in a separate operation or by returning the materials to the feed of an existing recovery boiler.
|
|
| 9. |
|
|
| 10. |
- Petrescu, Ana Maria Roxana, et al.
(författare)
-
The consolidated European synthesis of CO2emissions and removals for the European Union and United Kingdom : 1990-2018
- 2021
-
Ingår i: Earth System Science Data. - : Copernicus GmbH. - 1866-3508 .- 1866-3516. ; 13:5, s. 2363-2406
-
Forskningsöversikt (refereegranskat)abstract
- Reliable quantification of the sources and sinks of atmospheric carbon dioxide (CO2), including that of their trends and uncertainties, is essential to monitoring the progress in mitigating anthropogenic emissions under the Kyoto Protocol and the Paris Agreement. This study provides a consolidated synthesis of estimates for all anthropogenic and natural sources and sinks of CO2 for the European Union and UK (EU27 + UK), derived from a combination of state-of-the-art bottom-up (BU) and top-down (TD) data sources and models. Given the wide scope of the work and the variety of datasets involved, this study focuses on identifying essential questions which need to be answered to properly understand the differences between various datasets, in particular with regards to the less-well-characterized fluxes from managed ecosystems. The work integrates recent emission inventory data, process-based ecosystem model results, data-driven sector model results and inverse modeling estimates over the period 1990-2018. BU and TD products are compared with European national greenhouse gas inventories (NGHGIs) reported under the UNFCCC in 2019, aiming to assess and understand the differences between approaches. For the uncertainties in NGHGIs, we used the standard deviation obtained by varying parameters of inventory calculations, reported by the member states following the IPCC Guidelines. Variation in estimates produced with other methods, like atmospheric inversion models (TD) or spatially disaggregated inventory datasets (BU), arises from diverse sources including within-model uncertainty related to parameterization as well as structural differences between models. In comparing NGHGIs with other approaches, a key source of uncertainty is that related to different system boundaries and emission categories (CO2 fossil) and the use of different land use definitions for reporting emissions from land use, land use change and forestry (LULUCF) activities (CO2 land). At the EU27 + UK level, the NGHGI (2019) fossil CO2 emissions (including cement production) account for 2624 Tg CO2 in 2014 while all the other seven bottom-up sources are consistent with the NGHGIs and report a mean of 2588 (± 463 Tg CO2). The inversion reports 2700 Tg CO2 (± 480 Tg CO2), which is well in line with the national inventories. Over 2011-2015, the CO2 land sources and sinks from NGHGI estimates report-90 Tg C yr-1 ± 30 Tg C yr-1 while all other BU approaches report a mean sink of-98 Tg C yr-1 (± 362 Tg of C from dynamic global vegetation models only). For the TD model ensemble results, we observe a much larger spread for regional inversions (i.e., mean of 253 Tg C yr-1 ± 400 Tg C yr-1). This concludes that (a) current independent approaches are consistent with NGHGIs and (b) their uncertainty is too large to allow a verification because of model differences and probably also because of the definition of "CO2 flux"obtained from different approaches. The referenced datasets related to figures are visualized.
|
|
