| 1. |
- Akkoyun, S., et al.
(författare)
-
AGATA - Advanced GAmma Tracking Array
- 2012
-
Ingår i: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. - : Elsevier BV. - 0168-9002 .- 0167-5087 .- 1872-9576. ; 668, s. 26-58
-
Tidskriftsartikel (refereegranskat)abstract
- The Advanced GAmma Tracking Array (AGATA) is a European project to develop and operate the next generation γ-ray spectrometer. AGATA is based on the technique of γ-ray energy tracking in electrically segmented high-purity germanium crystals. This technique requires the accurate determination of the energy, time and position of every interaction as a γ ray deposits its energy within the detector volume. Reconstruction of the full interaction path results in a detector with very high efficiency and excellent spectral response. The realisation of γ-ray tracking and AGATA is a result of many technical advances. These include the development of encapsulated highly segmented germanium detectors assembled in a triple cluster detector cryostat, an electronics system with fast digital sampling and a data acquisition system to process the data at a high rate. The full characterisation of the crystals was measured and compared with detector- response simulations. This enabled pulse-shape analysis algorithms, to extract energy, time and position, to be employed. In addition, tracking algorithms for event reconstruction were developed. The first phase of AGATA is now complete and operational in its first physics campaign. In the future AGATA will be moved between laboratories in Europe and operated in a series of campaigns to take advantage of the different beams and facilities available to maximise its science output. The paper reviews all the achievements made in the AGATA project including all the necessary infrastructure to operate and support the spectrometer. © 2011 Elsevier B.V. All rights reserved.
|
|
| 2. |
- Valiente-Dobon, J. J., et al.
(författare)
-
Conceptual design of the AGATA 2 pi array at LNL
- 2023
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 1049
-
Tidskriftsartikel (refereegranskat)abstract
- The Advanced GAmma Tracking Array (AGATA) has been installed at Laboratori Nazionali di Legnaro (LNL), Italy. In this installation, AGATA will consist, at the beginning, of 13 AGATA triple clusters (ATCs) with an angular coverage of 1n,and progressively the number of ATCs will increase up to a 2 pi angular coverage. This setup will exploit both stable and radioactive ion beams delivered by the Tandem-PIAVE-ALPI accelerator complex and the SPES facility. The new implementation of AGATA at LNL will be used in two different configurations, firstly one coupled to the PRISMA large-acceptance magnetic spectrometer and lately a second one at Zero Degrees, along the beam line. These two configurations will allow us to cover a broad physics program, using different reaction mechanisms, such as Coulomb excitation, fusion-evaporation, transfer and fission at energies close to the Coulomb barrier. These setups have been designed to be coupled with a large variety of complementary detectors such as charged particle detectors, neutron detectors, heavy-ion detectors, high-energy gamma-ray arrays, cryogenic and gasjet targets and the plunger device for lifetime measurements. We present in this paper the conceptual design, characteristics and performance figures of this implementation of AGATA at LNL.
|
|
| 3. |
- Hadynska-Klek, K., et al.
(författare)
-
Quadrupole collectivity in Ca-42 from low-energy Coulomb excitation with AGATA
- 2018
-
Ingår i: Physical Review C. - : AMER PHYSICAL SOC. - 2469-9985 .- 2469-9993. ; 97:2
-
Tidskriftsartikel (refereegranskat)abstract
- ACoulomb-excitation experiment to study electromagnetic properties of Ca-42 was performed using a 170-MeV calcium beam from the TANDEM XPU facility at INFN Laboratori Nazionali di Legnaro. gamma rays from excited states in Ca-42 were measured with the AGATA spectrometer. The magnitudes and relative signs of ten E2 matrix elements coupling six low-lying states in Ca-42, including the diagonal E2 matrix elements of 2(1)(+) and 2(2)(+) states, were determined using the least-squares code GOSIA. The obtained set of reduced E2 matrix elements was analyzed using the quadrupole sum rule method and yielded overall quadrupole deformation for 0(1),(+)(2) and 2(1,2)(+) states, as well as triaxiality for 0(1,2)(+) states, establishing the coexistence of a weakly deformed ground-state band and highly deformed slightly triaxial sideband in Ca-42. The experimental results were compared with the state-of-the-art large-scale shell-model and beyond-mean-field calculations, which reproduce well the general picture of shape coexistence in Ca-42.
|
|
| 4. |
- Hadynska-Klek, K., et al.
(författare)
-
Superdeformed and Triaxial States in Ca-42
- 2016
-
Ingår i: Physical Review Letters. - : American Physical Society. - 0031-9007 .- 1079-7114. ; 117:6
-
Tidskriftsartikel (refereegranskat)abstract
- Shape parameters of a weakly deformed ground-state band and highly deformed slightly triaxial sideband in Ca-42 were determined from E2 matrix elements measured in the first low-energy Coulomb excitation experiment performed with AGATA. The picture of two coexisting structures is well reproduced by new state-of-the-art large-scale shell model and beyond-mean-field calculations. Experimental evidence for superdeformation of the band built on 0(2)(+) has been obtained and the role of triaxiality in the A similar to 40 mass region is discussed. Furthermore, the potential of Coulomb excitation as a tool to study superdeformation has been demonstrated for the first time.
|
|
| 5. |
- Hadynska-Klek, K., et al.
(författare)
-
Towards The Determination Of Superdeformation In Ca-42
- 2013
-
Ingår i: Acta Physica Polonica B. - 0587-4254 .- 1509-5770. ; 44:3, s. 617-625
-
Tidskriftsartikel (refereegranskat)abstract
- The Coulomb excitation experiment to study electromagnetic structure of low-lying states in Ca-42 with a focus on a possible superdeformation in this nucleus was performed at the Laboratori Nazionali di Legnaro in Italy. Preliminary values of the determined quadrupole deformation parameters for both the ground state band and the presumed superdeformed band are presented.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
- Palosuo, T., et al.
(författare)
-
A multi-model comparison of soil carbon assessment of a coniferous forest stand
- 2012
-
Ingår i: Environmental Modelling & Software. - : Elsevier. - 1364-8152 .- 1873-6726. ; 35, s. 38-49
-
Tidskriftsartikel (refereegranskat)abstract
- We simulated soil carbon stock dynamics of an Austrian coniferous forest stand with five soil-only models (Q, ROMUL, RothC, SoilCO2/RothC and Yasso07) and three plant-soil models (CENTURY, CoupModel and Forest-DNDC) for an 18-year period and the decomposition of a litter pulse over a 100-year period. The objectives of the study were to assess the consistency in soil carbon estimates applying a multi-model comparison and to present and discuss the sources of uncertainties that create the differences in model results. Additionally, we discuss the applicability of different modelling approaches from the view point of large-scale carbon assessments. Our simulation results showed a wide range in soil carbon stocks and stock change estimates reflecting substantial uncertainties in model estimates. The measured stock change estimate decreased much more than the model predictions. Model results varied not only due to the model structure and applied parameters, but also due to different input information and assumptions applied during the modelling processes. Initialization procedures applied with the models induced large differences among the modelled soil carbon stocks and stock change estimates. Decomposition estimates of the litter pulse driven by model structures and parameters also varied considerably. Our results support the use of relatively simple soil-only models with low data requirements in inventory type of large-scale carbon assessments. It is important that the modelling processes within the national inventories are transparently reported and special emphasis is put on how the models are used, which assumptions are applied and what is the quality of data used both as input and to calibrate the models.
|
|
