| 1. |
- Abbas, Ghazanfar, et al.
(författare)
-
Electrochemical investigation of mixed metal oxide nanocomposite electrode for low temperature solid oxide fuel cell
- 2017
-
Ingår i: International Journal of Modern Physics B. - : WORLD SCIENTIFIC PUBL CO PTE LTD. - 0217-9792. ; 31:27
-
Tidskriftsartikel (refereegranskat)abstract
- Zinc-based nanostructured nickel (Ni) free metal oxide electrode material Zn-0.60/CU0.20Mn0.20 oxide (CMZO) was synthesized by solid state reaction and investigated for low temperature solid oxide fuel cell (LTSOFC) applications. The crystal structure and surface morphology of the synthesized electrode material were examined by XRD and SEM techniques respectively. The particle size of ZnO phase estimated by Scherer's equation was 31.50 nm. The maximum electrical conductivity was found to be 12.567 S/cm and 5.846 S/cm in hydrogen and air atmosphere, respectively at 600 degrees C. The activation energy of the CMZO material was also calculated from the DC conductivity data using Arrhenius plots and it was found to be 0.060 and 0.075 eV in hydrogen and air atmosphere, respectively. The CMZO electrode-based fuel cell was tested using carbonated samarium doped ceria composite (NSDC) electrolyte. The three layers 13 mm in diameter and 1 mm thickness of the symmetric fuel cell were fabricated by dry pressing. The maximum power density of 728.86 mW/cm(2) was measured at 550 degrees C.
|
|
| 2. |
- Abbas, Ghazanfar, et al.
(författare)
-
Electrochemical study of nanostructured electrode for low-temperature solid oxide fuel cell (LTSOFC)
- 2014
-
Ingår i: International Journal of Energy Research. - : Hindawi Limited. - 0363-907X .- 1099-114X. ; 38:4, s. 518-523
-
Tidskriftsartikel (refereegranskat)abstract
- Zn-based nanostructured Ba0.05Cu0.25Fe0.10Zn0.60O (BCFZ) oxide electrode material was synthesized by solid-state reaction for low-temperature solid oxide fuel cell. The cell was fabricated by sandwiching NK-CDC electrolyte between BCFZ electrodes by dry press technique, and its performance was assessed. The maximum power density of 741.87 mW-cm(-2) was achieved at 550 degrees C. The crystal structure and morphology were characterized by X-ray diffractometer (XRD) and SEM. The particle size was calculated to be 25 nm applying Scherer's formula from XRD data. Electronic conductivities were measured with the four-probe DC method under hydrogen and air atmosphere. AC Electrochemical Impedance Spectroscopy of the BCFZ oxide electrode was also measured in hydrogen atmosphere at 450 degrees C.
|
|
| 3. |
- Abbas, Ghazanfar, et al.
(författare)
-
Preparation and characterization of nanocomposite calcium doped ceria electrolyte with alkali carbonates (NK-CDC) for SOFC
- 2010
-
Ingår i: ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology, FUELCELL 2010. - : ASME Press. - 9780791844052 ; , s. 427-432
-
Konferensbidrag (refereegranskat)abstract
- The entire world's challenge is to find out the renewable energy sources due to rapid depletion of fossil fuels because of their high consumption. Solid Oxide Fuel Cells (SOFCs) are believed to be the best alternative source which converts chemical energy into electricity without combustion. Nanostructured study is required to develop highly ionic conductive electrolyte for SOFCs. In this work, the calcium doped ceria (Ce0.8Ca0.2O 1.9) coated with 20% molar ratio of two alkali carbonates (CDC-M: MCO3, where M= Na and K) electrolyte was prepared by co-precipitation method in this study. Ni based electrode was used to fabricate the cell by dry pressing technique. The crystal structure and surface morphology was characterized by X-Ray Diffractometer (XRD), Scanning Electron Microscopy (SEM) and High Resolution Transmission Electron Microscopy (HRTEM). The particle size was calculated in the range of 10-20nm by Scherrer's formula and compared with SEM and TEM results. The ionic conductivity was measured by using AC Electrochemical Impedance Spectroscopy (EIS) method. The activation energy was also evaluated. The performance of the cell was measured 0.567W/cm2 at temperature 550°C with hydrogen as a fuel.
|
|
| 4. |
- Abbas, Ghazanfar, et al.
(författare)
-
Preparation and Characterization of Nanocomposite Calcium Doped Ceria Electrolyte With Alkali Carbonates (NK-CDC) for SOFC
- 2011
-
Ingår i: Journal of Fuel Cell Science and Technology. - : ASME International. - 1550-624X .- 1551-6989. ; 8:4, s. 041013-
-
Tidskriftsartikel (refereegranskat)abstract
- The entire world's challenge is to find out the renewable energy sources due to rapid depletion of fossil fuels because of their high consumption. Solid oxide fuel cells (SOFCs) are believed to be the best alternative source, which converts chemical energy into electricity without combustion. Nanostructure study is required to develop highly ionic conductive electrolytes for SOFCs. In this work, the calcium doped ceria (Ce0.8Ca0.2O1.9) coated with 20% molar ratio of two alkali carbonates (CDC-M: MCO3, where M = Na and K) electrolyte was prepared by coprecipitation method. Ni based electrode was used to fabricate the cell by dry pressing technique. The crystal structure and surface morphology were characterized by an X-ray diffractometer, scanning electron microscopy (SEM), and high resolution transmission electron microscopy (TEM). The particle size was calculated in the range 10-20 nm by Scherer's formula and compared with SEM and TEM results. The ionic conductivity was measured by using ac electrochemical impedance spectroscopy method. The activation energy was also evaluated. The performance of the cell was measured 0.567 W/cm(2) at temperature 550 degrees C with hydrogen as a fuel.
|
|
| 5. |
- Abbas, Ghazanfar, et al.
(författare)
-
Study of CuNiZnGdCe-Nanocomposite Anode for Low Temperature SOFC
- 2012
-
Ingår i: Nanoscience and Nanotechnology Letters. - : American Scientific Publishers. - 1941-4900 .- 1941-4919. ; 4:4, s. 389-393
-
Tidskriftsartikel (refereegranskat)abstract
- Composite electrodes of Cu0.16Ni0.27Zn0.37Ce0.16Gd0.04 (CNZGC) oxides have been successfully synthesized by solid state reaction method as anode material for low temperature solid oxide fuel cell (LTSOFC). These electrodes are characterized by XRD followed by sintering at various time periods and temperatures. Particle size of optimized composition was calculated 40-85 nm and sintered at 800 degrees C for 4 hours. Electrical conductivity of 4.14 S/cm was obtained at a temperature of 550 degrees C by the 4-prob DC method. The activation energy was calculated 4 x 10(-2) eV at 550 degrees C. Hydrogen was used as fuel and air as oxidant at anode and cathode sides respectively. I-V/I-P curves were obtained in the temperature range of 400-550 degrees C. The maximum power density was achieved for 570 mW/cm(2) at 550 degrees C.
|
|
| 6. |
- Abbas, Ghazanfar, et al.
(författare)
-
Synthesize and characterization of nanocomposite anodes for low temperature solid oxide fuel cell
- 2015
-
Ingår i: International journal of hydrogen energy. - : Elsevier BV. - 0360-3199 .- 1879-3487. ; 40:1, s. 891-897
-
Tidskriftsartikel (refereegranskat)abstract
- Solid oxide fuel cells have much capability to become an economical alternative energy conversion technology having appropriate materials that can be operated at comparatively low temperature in the range of 400-600 degrees C. The nano-scale engineering has been incorporated to improve the catalytic activity of anode materials for solid oxide fuel cells. Nanostructured Al0.10NixZn0.90-xO oxides were prepared by solid state reaction, which were then mixed with the prepared Gadolinium doped Ceria GDC electrolyte. The crystal structure and surface morphology were characterized by XRD and SEM. The particle size was evaluated by XRD data and found in the range of 20-50 nm, which was then ensured by SEM pictures. The pellets of 13 mm diameter were pressed by dry press technique and electrical conductivities (DC and AC) were determined by four probe techniques and the values have been found to be 10.84 and 4.88 S/cm, respectively at hydrogen atmosphere in the temperature range of 300-600 degrees C. The Electrochemical Impedance Spectroscopy (EIS) analysis exhibits the pure electronic behavior at hydrogen atmosphere. The maximum power density of ANZ-GDC composite anode based solid oxide fuel cell has been achieved 705 mW/cm(2) at 550 degrees C.
|
|
| 7. |
- Afzal, Muhammad, et al.
(författare)
-
Analysis of a perovskite-ceria functional layer-based solid oxide fuel cell
- 2017
-
Ingår i: International journal of hydrogen energy. - : Elsevier. - 0360-3199 .- 1879-3487. ; 42:27, s. 17536-17543
-
Tidskriftsartikel (refereegranskat)abstract
- A fuel cell based on a functional layer of perovskite Ba0.5Sr0.5Co0.8Fe0.2O3-delta (BSCF) composited samarium doped ceria (SDC) has been developed. The device achieves a peak power density of 640.4 mW cm(-2) with an open circuit voltage (OCV) of 1.04 Vat 560 degrees C using hydrogen and air as the fuel and oxidant, respectively. A numerical model is applied to fit the experimental cell voltage. The kinetics of anodic and cathodic reactions are modeled based on the measurements obtained by electrochemical impedance spectroscopy (EIS). Modeling results are in well agreement with the experimental data. Mechanical stability of the cell is also examined by using analysis with field emission scanning electron microscope (FESEM) associated with energy dispersive spectroscopy (EDS) after testing the cell performance.
|
|
| 8. |
- Ahmad, Muhammad Ashfaq, et al.
(författare)
-
Structural and electrical characterisation of nanostructure electrodes for SOFCs
- 2014
-
Ingår i: International journal of hydrogen energy. - : Elsevier BV. - 0360-3199 .- 1879-3487. ; 39:30, s. 17487-17491
-
Tidskriftsartikel (refereegranskat)abstract
- This paper reports the effects of sintering temperature on structure, particle size and conductivity of electrodes (Sn0.2Zn0.8Fe0.2O & Sn0.8Zn0.2Fe0.2O). The electrode material was prepared by the chemical method combining a solid state reaction. Structural analyses were performed using X-ray diffraction and scanning electron microscopy. The particle size of the material obtained using Scherrer's formula was 50-60 nm and the nanostructure's surface was studied using electrochemical characterisations tools. Electrical conductivity was determined using the 4-probe DC method, which was compared with the 4-probe AC method. These results suggest a promising substitute for the conventional electrodes of solid oxide fuel cells (SOFCs). It is known that a sintering temperature above 1000 degrees C causes an increase in density and a reduction of porosity. Therefore, we optimised the sintering temperature at 1000 degrees C and obtained electrical conductivity of about 5 S Thus, this electrode could play a vital role in the development of high performance SOFCs at intermediate temperatures.
|
|
| 9. |
- Ahmed, A., et al.
(författare)
-
Highly efficient composite electrolyte for natural gas fed fuel cell
- 2016
-
Ingår i: International journal of hydrogen energy. - : Elsevier. - 0360-3199 .- 1879-3487. ; 41:16, s. 6972-6979
-
Tidskriftsartikel (refereegranskat)abstract
- Solid oxide fuel cells (SOFCs) have the ability to operate with different variants of hydro carbon fuel such as biogas, natural gas, methane, ethane, syngas, methanol, ethanol, hydrogen and any other hydrogen rich gas. Utilization of these fuels in SOFC, especially the natural gas, would significantly reduce operating cost and would enhance the viability for commercialization of FC technology. In this paper, the performance of two indigenously manufactured nanocomposite electrolytes; barium and samarium doped ceria (BSDC-carbonate); and lanthanum and samarium doped ceria (co-precipitation method LSDC-carbonate) using natural gas as fuel is discussed. The nanocomposite electrolytes were synthesized using co-precipitation and wet chemical methods (here after referred to as nano electrolytes). The structure and morphology of the nano electrolytes were examined by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The fuel cell performance (OCV) was tested at temperature (300-600 °C). The ionic conductivity of the nano electrolytes were measured by two probe DC method. The detailed composition analysis of nano electrolytes was performed with the help of Raman Spectroscopy. Electrochemical study has shown an ionic conductivity of 0.16 Scm-1 at 600 °C for BSDC-carbonate in hydrogen atmosphere, which is higher than conventional electrolytes SDC and GDC under same conditions. In this article reasonably good ionic conductivity of BSDC-carbonate, at 600 °C, has also been achieved in air atmosphere which is comparatively greater than the conventional SDC and GDC electrolytes.
|
|
| 10. |
- Ajmal Khan, Muhammad, et al.
(författare)
-
Comparative study of the nano-composite electrolytes based on samaria-doped ceria for low temperature solid oxide fuel cells (LT-SOFCs)
- 2013
-
Ingår i: International journal of hydrogen energy. - : Elsevier BV. - 0360-3199 .- 1879-3487. ; 38:36, s. 16524-16531
-
Tidskriftsartikel (refereegranskat)abstract
- Ceria-based electrolyte materials have great potential in low and intermediate temperature solid oxide fuel cell applications. In the present study, three types of ceria-based nanocomposite electrolytes (LNK-SDC, LN-SDC and NK-SDC) were synthesized. One-step co-precipitation method was adopted and different techniques were applied to characterize the obtained ceria-based nano-composite electrolyte materials. TGA, XRD and SEM were used to analyze the thermal effect, crystal structure and morphology of the materials. Cubic fluorite structures have been observed in all composite electrolytes. Furthermore, the crystallite sizes of the LN-SDC, NK-SDC, LNK-SDC were calculated by Scherrer formula and found to be in the range 20 nm, 21 nm and 19 nm, respectively. These values emphasize a good agreement with the SEM results. The ionic conductivities were measured using EIS (Electrochemical Impedance Spectroscopy) with two-probe method and the activation energies were also calculated using Arrhenius plot. The maximum power density was achieved 484 mW/cm(2) of LNK-SDC electrolyte at 570 degrees C using the LiCuZnNi oxide electrodes.
|
|
