| 1. |
- Afzal, Muhammad, et al.
(författare)
-
Analysis of a perovskite-ceria functional layer-based solid oxide fuel cell
- 2017
-
Ingår i: International journal of hydrogen energy. - : Elsevier. - 0360-3199 .- 1879-3487. ; 42:27, s. 17536-17543
-
Tidskriftsartikel (refereegranskat)abstract
- A fuel cell based on a functional layer of perovskite Ba0.5Sr0.5Co0.8Fe0.2O3-delta (BSCF) composited samarium doped ceria (SDC) has been developed. The device achieves a peak power density of 640.4 mW cm(-2) with an open circuit voltage (OCV) of 1.04 Vat 560 degrees C using hydrogen and air as the fuel and oxidant, respectively. A numerical model is applied to fit the experimental cell voltage. The kinetics of anodic and cathodic reactions are modeled based on the measurements obtained by electrochemical impedance spectroscopy (EIS). Modeling results are in well agreement with the experimental data. Mechanical stability of the cell is also examined by using analysis with field emission scanning electron microscope (FESEM) associated with energy dispersive spectroscopy (EDS) after testing the cell performance.
|
|
| 2. |
- Mi, Youquan, et al.
(författare)
-
Experimental and physical approaches on a novel semiconducting-ionic membrane fuel cell
- 2018
-
Ingår i: International journal of hydrogen energy. - : Elsevier. - 0360-3199 .- 1879-3487. ; 43:28, s. 12756-12764
-
Tidskriftsartikel (refereegranskat)abstract
- Semiconducting-ionic membranes (SIMs) have exhibited significant superiority to replace the conventional ionic electrolytes in solid oxide fuel cells (SOFCs). One interesting phenomenon is that the SIMs can successfully avoid the underlying short-circuiting issue and power losses while bringing significantly enhanced power output. It is crucial to understand the physics in such devices as they show distinct electrochemical processes with conventional fuel cells. We first presented experimental studies of a SIM fuel cell based on a composite of semiconductor LiCo0.8Fe0.2O2 (LCF) and ionic conductor Sm-doped CeO2 (SDC), which achieved a remarkable power density of 1150 mW cm(-2) at 550 degrees C along with a high open circuit voltage (OCV) of 1.04 V. Then, for the first time we used a physical model via combining a semiconductor-ionic contact junction with a rectifying layer which blocks the electron leakage to describe such unique SIM device and excellent performance. Current and power are the most important characteristics for the device, by introducing the rectifying layer we described the SIM physical nature and new device process. This work presented a new view on advanced SIM SOFC science and technology from physics.
|
|
| 3. |
- Mushtaq, Naveed, et al.
(författare)
-
Tuning the Energy Band Structure at Interfaces of the SrFe0.75Ti0.25O3-delta-Sm0.25Ce0.75O2-delta Heterostructure for Fast Ionic Transport
- 2019
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 11:42, s. 38737-38745
-
Tidskriftsartikel (refereegranskat)abstract
- Interface engineering holds huge potential for enabling exceptional physical properties in heterostructure materials via tuning properties at the atomic level. In this study, a heterostructure built by a new redox stable semiconductor SrFe0.75Ti0.25O3-delta (SFT) and an ionic conductor Sm0.25Ce0.75O2 (SDC) is reported. The SFT-SDC heterostructure exhibits a high ionic conductivity >0.1 S/cm at 520 degrees C, which is 1 order of magnitude higher than that of bulk SDC. When it was applied into the fuel cell, the SFT-SDC can realize favorable electrolyte functionality and result in an excellent power density of 920 mW cm(-2) at 520 degrees C. The prepared SFT-SDC heterostructure materials possess both electronic and ionic conduction, where electron states modulate local electrical field to facilitate ion transport. Further investigations to calculate the structure and electronic structure/state of SFT and SDC are done using density functional theory (DFT). It is found that the reconstruction of the energy band at interfaces is responsible for such enhanced ionic conductivity and cell power output. The current study about the perovskite-based heterostructure presents a novel strategy for developing advanced ceramic fuel cells.
|
|
| 4. |
- Wang, Baoyuan, et al.
(författare)
-
Preparation and characterization of Sm and Ca co-doped ceria-La0.6Sr0.4Co0.2Fe0.8O3-delta semiconductor-ionic composites for electrolyte-layer-free fuel cells
- 2016
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 4:40, s. 15426-15436
-
Tidskriftsartikel (refereegranskat)abstract
- A series of Sm and Ca co-doped ceria, i.e. Ca0.04Ce0.96-xSmxO2-delta (x = 0, 0.09, 0.16, and 0.24) (SCDC), were synthesized by a co-precipitation method. Detailed morphology, composition, crystal structure and electrochemical properties of the prepared materials were characterized. The results revealed that Sm and Ca co-doping could enhance the ionic conductivity in comparison with that of single Ca-doped samples. The composition as Ca0.04Ce0.80Sm0.16O2-delta exhibited a highest ionic conductivity of 0.039 S cm(-1) at 600 degrees C in comparison with the rest of the series, and the optimal ionic conductivity can be interpreted by the coupling effect of oxygen vacancies and mismatch between the dopant ionic radius and critical radius. Composite formation between the semiconductor La0.6Sr0.4Co0.2Fe0.8O3-delta (LSCF) and the as-prepared SCDC contributed to a remarkable improvement in the ionic conductivity, an unexpectedly high ionic conductivity of 0.188 S cm(-1) was obtained for LSCF-SCDC composites at 600 degrees C, which was four times higher than that of pure SCDC. Using transmission electron microscopy and spectroscopy approaches, we detected an enrichment of oxygen in the LSCF-SCDC interface region and a depletion of oxygen vacancies in LSCF-SCDC and LSCF-LSCF grain boundaries was significantly mitigated, which resulted in the enhancement of ionic conductivity of semiconductor-ionic LSCF-SCDC composites. The electrolyte-layer-free fuel cell (EFFC) fabricated from the LSCF-SCDC semiconductor-ionic membrane demonstrated excellent performances, e.g. 814 mW cm(-2) at 550 degrees C for using the LSCF-Ca0.04Ce0.80Sm0.16O2-delta (SCDC2).
|
|
| 5. |
- Wang, Baoyuan, et al.
(författare)
-
Semiconductor-ionic Membrane of LaSrCoFe-oxide-doped Ceria Solid Oxide Fuel Cells
- 2017
-
Ingår i: Electrochimica Acta. - : Elsevier BV. - 0013-4686 .- 1873-3859. ; 248, s. 496-504
-
Tidskriftsartikel (refereegranskat)abstract
- A novel semiconductor-ionic La0.6Sr0.4Co0.2Fe0.8O3-delta (LSCF)-Sm/Ca co-doped CeO2 (SCDC) nanocomposite has been developed as a membrane, which is sandwiched between two layers of Ni0.8Co0.15Al0.05Li-oxide (NCAL) to construct semiconductor-ion membrane fuel cell (SIMFC). Such a device presented an open circuit voltage (OCV) above 1.0 V and maximum power density of 814 mW cm(-2) at 550 degrees C, which is much higher than 0.84 V and 300 mW cm(-2) for the fuel cell using the SCDC membrane. Moreover, the SIMFC has a relatively promising long-term stability, the voltage can maintain at 0.966 V for 60 hours without degradation during the fuel cells operation and the open-circuit voltage (OCV) can return to 1.06 V after long-term fuel cell operation. The introduction of LSCF electronic conductor into the membrane did not cause any short circuit but brought significant enhancement of fuel cell performances. The Schottky junction is proposed to prevent the internal electrons passing thus avoiding the device short circuiting problem.
|
|
