| 1. |
- Pettersson, Håkan, et al.
(författare)
-
Infrared Photodetectors in Heterostructure Nanowires
- 2006
-
Ingår i: Nano letters (Print). - Washington : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 6:2, s. 229-232
-
Tidskriftsartikel (refereegranskat)abstract
- We report on spectrally resolved photocurrent measurements on single self-assembled nanowire heterostructures. The wires, typically 3 μm long with an average diameter of 85 nm, consist of InAs with a 1 μm central part of InAsP. Two different sets of wires were prepared with phosphorus contents of 15 ±3% and 35 ±3%, respectively, as determined by energy-dispersive spectroscopy measurements made in transmission electron microscopy. Ohmic contacts are fabricated to the InAs ends of the wire using e-beam lithography. The conduction band offset between the InAs and InAsP regions virtually removes the dark current through the wires at low temperature. In the optical experiments, interband excitation in the phosphorus-rich part of the wires results in a photocurrent with threshold energies of about 0.65 and 0.82 eV, respectively, in qualitative agreement with the expected band gap of the two compositions. Furthermore, a strong polarization dependence is observed with an order of magnitude larger photocurrent for light polarized parallel to the wire than for light polarized perpendicular to the wire. We believe that these wires form promising candidates as nanoscale infrared polarization-sensitive photodetectors.
|
|
| 2. |
- Pettersson, Håkan, 1962-, et al.
(författare)
-
Nano-Schottky contacts realized by bottom-up technique
- 2010
-
Ingår i: Bulletin of American Physical Society. - : American Physical Society.
-
Konferensbidrag (refereegranskat)abstract
- Here we present a comprehensive study of a rectifying nano-Schottky contact formed at the interface between a gold catalytic particle and an epitaxially grown GaInAs/InAs nanowire. Selective electrical connections formed by electron beam lithography to the catalytic particle on one side, and to the InAs segment on the other side allowed electrical and optical characterization of the formed Schottky junction. From IV measurements taken at different temperatures we have deduced the Schottky barrier height and the height of the barrier formed in the graded GaInAs nanowire segment. The IV characteristics measured under laser stimulation showed that the device can be used as a unipolar photodetector with extremely small detection volume and potentially ultra fast response.
|
|
| 3. |
- Suyatin, Dmitry, et al.
(författare)
-
Nano-Schottky contacts realized by bottom-up technique
- 2010
-
Ingår i: INEC 2010 - 2010 3rd International Nanoelectronics Conference, Proceedings. - Piscataway, N.J. : IEEE Press. - 9781424435432 ; , s. 252-253
-
Konferensbidrag (refereegranskat)abstract
- Properties of nanostructures realized by bottom-up techniques are often different from their bulk counterparts. Here we present a study of a nano-Schottky contact formed at the interface between a gold catalytic particle and an epitaxially grown GaxIn1-xAs/InAs nanowire. Selective electrical connections formed to the catalytic particle on one side and to the InAs segment on the other side allowed electrical and optical characterization of the formed junction. We demonstrate that the heterostructure region adjacent to the catalytic particle may act as an ultra-small volume unipolar photodetector with potentially ultra-fast response.
|
|
| 4. |
|
|
| 5. |
- Bao, Jiming, et al.
(författare)
-
Optical properties of rotationally twinned InP nanowire heterostructures
- 2008
-
Ingår i: Nano Letters. - : American Chemical Society (ACS). - 1530-6992 .- 1530-6984. ; 8:3, s. 836-841
-
Tidskriftsartikel (refereegranskat)abstract
- We have developed a technique so that both transmission electron microscopy and microphotoluminescence can be performed on the same semiconductor nanowire over a large range of optical power, thus allowing us to directly correlate structural and optical properties of rotationally twinned zinc blende InP nanowires. We have constructed the energy band diagram of the resulting multiquantum well heterostructure and have performed detailed quantum mechanical calculations of the electron and hole wave functions. The excitation power dependent blue-shift of the photoluminescence can be explained in terms of the predicted staggered band alignment of the rotationally twinned zinc blende/wurzite InP heterostructure and of the concomitant diagonal transitions between localized electron and hole states responsible for radiative recombination. The ability of rotational twinning to introduce a heterostructure in a chemically homogeneous nanowire material and alter in a major way its optical properties opens new possibilities for band-structure engineering.
|
|
| 6. |
- Bolinsson, Jessica, et al.
(författare)
-
GaAs/AlGaAs heterostructure nanowires studied by cathodoluminescence
- 2014
-
Ingår i: Nano Reseach. - : Springer Science and Business Media LLC. - 1998-0124 .- 1998-0000. ; 7:4, s. 473-490
-
Tidskriftsartikel (refereegranskat)abstract
- In this report we explore the structural and optical properties of GaAs/AlGaAs heterostructure nanowires grown by metalorganic vapour phase epitaxy using gold seed-particles. The optical studies were done by low-temperature cathodoluminescence (CL) in a scanning electron microscope (SEM). We perform a systematic investigation of how the nanowire growth-temperature affects the total photon emission, and variations in the emission energy and intensity along the length of the nanowires. The morphology and crystal structures of the nanowires were investigated using SEM and transmission electron microscopy (TEM). In order to correlate specific photon emission characteristics with variations in the nanowire crystal structure directly, TEM and spatially resolved CL measurements were performed on the same individual nanowires. We found that the main emission energy was located at around 1.48 eV, and that the emission intensity was greatly enhanced when increasing the GaAs nanowire core growth temperature. The data strongly suggests that this emission energy is related to rotational twins in the GaAs nanowire core. Our measurements also show that radial overgrowth by GaAs on the GaAs nanowire core can have a deteriorating effect on the optical quality of the nanowires. Finally, we conclude that an in situ pre-growth annealing step at a sufficiently high temperature significantly improves the optical quality of the nanowires.
|
|
| 7. |
- Borgström, Magnus, et al.
(författare)
-
In Situ Etching for Total Control Over Axial and Radial Nanowire Growth
- 2010
-
Ingår i: Nano Reseach. - : Springer Science and Business Media LLC. - 1998-0124 .- 1998-0000. ; 3:4, s. 264-270
-
Tidskriftsartikel (refereegranskat)abstract
- We report a method using in situ etching to decouple the axial from the radial nanowire growth pathway, independent of other growth parameters. Thereby a wide range of growth parameters can be explored to improve the nanowire properties without concern of tapering or excess structural defects formed during radial growth. We demonstrate the method using etching by HCl during InP nanowire growth. The improved crystal quality of etched nanowires is indicated by strongly enhanced photoluminescence as compared to reference nanowires obtained without etching.
|
|
| 8. |
|
|
| 9. |
- Borgström, Magnus, et al.
(författare)
-
Precursor evaluation for in situ InP nanowire doping
- 2008
-
Ingår i: Nanotechnology. - : IOP Publishing. - 0957-4484 .- 1361-6528. ; 19:44
-
Tidskriftsartikel (refereegranskat)abstract
- The use of tetraethyltin (TESn) and dimethylzinc (DMZn) as in situ n- and p-dopant precursors during particle-assisted growth of InP nanowires is reported. Gate voltage dependent transport measurements demonstrate that the nanowires can be predictably synthesized as either n- or p-type. These doped nanowires can be characterized based on their electric field response and we find that n- type doping scales over a range from 10(17) to 10(19) cm(-3) with increasing input TESn dopant molar fraction. On the other hand, the p-type doping using DMZn saturates at low levels, probably related to a strong increase in nanowire growth rate with increasing DMZn molar fractions. By optimizing growth conditions with respect to tapering, axial pn-junctions exhibiting rectifying behavior were fabricated. The pn-junctions can be operated as light emitting diodes.
|
|
| 10. |
- Ellström, Carl, et al.
(författare)
-
Investigations of InAs surface dots on InP
- 2006
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 89:3
-
Tidskriftsartikel (refereegranskat)abstract
- We have fabricated InAs dots on the surface of InP, determined their structure, and measured the optical transition energy. This energy was found to be in excellent agreement with theoretical calculations, where no free parameters have been used. The calculations were performed using eight-band k center dot p theory in the envelope function approximation. We conclude that this theory is adequate to describe quantum dots also when one of the confining materials is vacuum. (c) 2006 American Institute of Physics.
|
|
