| 1. |
- Bu, Junling, et al.
(författare)
-
Catalytic promiscuity of O-methyltransferases from Corydalis yanhusuo leading to the structural diversity of benzylisoquinoline alkaloids
- 2022
-
Ingår i: Horticulture Research. - : Oxford University Press (OUP). - 2662-6810 .- 2052-7276. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- O-methyltransferases play essential roles in producing structural diversity and improving the biological properties of benzylisoquinoline alkaloids (BIAs) in plants. In this study, Corydalis yanhusuo, a plant used in traditional Chinese medicine due to the analgesic effects of its BIA-active compounds, was employed to analyze the catalytic characteristics of O-methyltransferases in the formation of BIA diversity. Seven genes encoding O-methyltransferases were cloned, and functionally characterized using seven potential BIA substrates. Specifically, an O-methyltransferase (CyOMT2) with highly efficient catalytic activity of both 4′- and 6-O-methylations of 1-BIAs was found. CyOMT6 was found to perform two sequential methylations at both 9- and 2-positions of the essential intermediate of tetrahydroprotoberberines, (S)-scoulerine. Two O-methyltransferases (CyOMT5 and CyOMT7) with wide substrate promiscuity were found, with the 2-position of tetrahydroprotoberberines as the preferential catalytic site for CyOMT5 (named scoulerine 2-O-methyltransferase) and the 6-position of 1-BIAs as the preferential site for CyOMT7. In addition, results of integrated phylogenetic molecular docking analysis and site-directed mutation suggested that residues at sites 172, 306, 313, and 314 in CyOMT5 are important for enzyme promiscuity related to O-methylations at the 6- and 7-positions of isoquinoline. Cys at site 253 in CyOMT2 was proved to promote the methylation activity of the 6-position and to expand substrate scopes. This work provides insight into O-methyltransferases in producing BIA diversity in C. yanhusuo and genetic elements for producing BIAs by metabolic engineering and synthetic biology.
|
|
| 2. |
- Ying, Keke, et al.
(författare)
-
Quasi-Synchronous Random Access for Massive MIMO-Based LEO Satellite Constellations
- 2023
-
Ingår i: IEEE Journal on Selected Areas in Communications. - : Institute of Electrical and Electronics Engineers (IEEE). - 0733-8716. ; 41:6, s. 1702-1722
-
Tidskriftsartikel (refereegranskat)abstract
- Low earth orbit (LEO) satellite constellation-enabled communication networks are expected to be an important part of many Internet of Things (IoT) deployments due to their unique advantage of providing seamless global coverage. In this paper, we investigate the random access problem in massive multiple-input multiple-output-based LEO satellite systems, where the multi-satellite cooperative processing mechanism is considered. Specifically, at edge satellite nodes, we conceive a training sequence padded multi-carrier system to overcome the issue of imperfect synchronization, where the training sequence is utilized to detect the devices' activity and estimate their channels. Considering the inherent sparsity of terrestrial-satellite links and the sporadic traffic feature of IoT terminals, we utilize the orthogonal approximate message passing-multiple measurement vector algorithm to estimate the delay coefficients and user terminal activity. To further utilize the structure of the receive array, a two-dimensional estimation of signal parameters via rotational invariance technique is performed for enhancing channel estimation. Finally, at the central server node, we propose a majority voting scheme to enhance activity detection by aggregating backhaul information from multiple satellites. Moreover, multi-satellite cooperative linear data detection and multi-satellite cooperative Bayesian dequantization data detection are proposed to cope with perfect and quantized backhaul, respectively. Simulation results verify the effectiveness of our proposed schemes in terms of channel estimation, activity detection, and data detection for quasi-synchronous random access in satellite systems.
|
|
| 3. |
- Ying, Yang, 1982-
(författare)
-
Inclusion Behaviour under a Swirl Flow in a Continuous Casting Process
- 2014
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- A swirl flow generated in a submerged entry nozzle (SEN) can effectively improve a flow pattern and heat transfer in a continuous casting process by using the methods of “swirl blade type” and “electromagnetic type”. In order to obtain a further in-depth understanding with respect to the effect of a swirl flow on a continuous casting process, the inclusion behaviour in a SEN and a mold was studied in the present work. Moreover, the use of electromagnetics was adopted for to generate a rotating electromagnetic field in a continuous casting process of steel. Specifically, an electromagnetic swirl flow generator (EMSFG) was placed around a SEN.First of all, two kinds of a full type EMSFG and a half type EMSFG were designed based on mathematical modeling. Then, distributions of a magnetic flux intensity in an EMSFG as well as distributions of a Lorentz force in molten steel were simulated. It was found that the EMSFG structure and electromagnetic parameters have an important effect on the magnetic flux intensity and Lorentz force distributions. For both a full type and a half type EMSFG, the magnetic flux intensity and Lorentz force increases as the magnetomotive force increases. Especially, for a full type EMSFG, the magnetic flux intensity is distributed evenly in molten steel. Moreover, the Lorentz force increases along a radial direction in the molten steel in the SEN. However, for a half type EMSFG, the magnetic flux intensity and Lorentz force decreases gradually towards the region without an EMSFG. Consequently, a full type EMSFG with a 44000 AT magnetomotive force and a 50 Hz frequency is more suitable to apply in the operation of an EMSFG under actual production conditions.Secondly, the flow field, the temperature field of molten steel and the inclusion behaviour in a SEN and a square bloom mold were simulated under the influence of a rotating electromagnetic field (swirl generator). Also, the influences of different inclusion parameters such as the densities, sizes and boundary conditions, on the inclusion behavior were studied. The results show that a flow pattern in a SEN can be characterized into three distinct flow regions: an accelerating flow of molten steel from an electromagnetic swirl flow generator (EMSFG) inlet to an EMSFG center, a decelerating flow of molten steel from an EMSFG center to an EMSFG outlet, and a recirculation flow of molten steel from an EMSFG outlet to an SEN outlet. In addition, it was found that light Al2O3 inclusion moves towards the rotational center by a centrifugal force, and that a swirl flow prevents nozzle clogging. Moreover, it was also found that the inclusion separation to a mold meniscus increased and that the inclusions trap into a solidified shell wall decreased by using a swirl flow.
|
|
| 4. |
- You, Xiaohu, et al.
(författare)
-
Towards 6G wireless communication networks: vision, enabling technologies, and new paradigm shifts
- 2021
-
Ingår i: Science China Information Sciences. - : Science Press. - 1674-733X .- 1869-1919. ; 64:1
-
Forskningsöversikt (refereegranskat)abstract
- The fifth generation (5G) wireless communication networks are being deployed worldwide from 2020 and more capabilities are in the process of being standardized, such as mass connectivity, ultra-reliability, and guaranteed low latency. However, 5G will not meet all requirements of the future in 2030 and beyond, and sixth generation (6G) wireless communication networks are expected to provide global coverage, enhanced spectral/energy/cost efficiency, better intelligence level and security, etc. To meet these requirements, 6G networks will rely on new enabling technologies, i.e., air interface and transmission technologies and novel network architecture, such as waveform design, multiple access, channel coding schemes, multi-antenna technologies, network slicing, cell-free architecture, and cloud/fog/edge computing. Our vision on 6G is that it will have four new paradigm shifts. First, to satisfy the requirement of global coverage, 6G will not be limited to terrestrial communication networks, which will need to be complemented with non-terrestrial networks such as satellite and unmanned aerial vehicle (UAV) communication networks, thus achieving a space-air-ground-sea integrated communication network. Second, all spectra will be fully explored to further increase data rates and connection density, including the sub-6 GHz, millimeter wave (mmWave), terahertz (THz), and optical frequency bands. Third, facing the big datasets generated by the use of extremely heterogeneous networks, diverse communication scenarios, large numbers of antennas, wide bandwidths, and new service requirements, 6G networks will enable a new range of smart applications with the aid of artificial intelligence (AI) and big data technologies. Fourth, network security will have to be strengthened when developing 6G networks. This article provides a comprehensive survey of recent advances and future trends in these four aspects. Clearly, 6G with additional technical requirements beyond those of 5G will enable faster and further communications to the extent that the boundary between physical and cyber worlds disappears.
|
|
