| 1. |
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
- Fan, Qunping, et al.
(författare)
-
Unidirectional Sidechain Engineering to Construct Dual-Asymmetric Acceptors for 19.23 % Efficiency Organic Solar Cells with Low Energy Loss and Efficient Charge Transfer
- 2023
-
Ingår i: Angewandte Chemie International Edition. - : WILEY-V C H VERLAG GMBH. - 1433-7851 .- 1521-3773. ; 62:36
-
Tidskriftsartikel (refereegranskat)abstract
- Achieving both high open-circuit voltage (V-oc) and short-circuit current density (J(sc)) to boost power-conversion efficiency (PCE) is a major challenge for organic solar cells (OSCs), wherein high energy loss (E-loss) and inefficient charge transfer usually take place. Here, three new Y-series acceptors of mono-asymmetric asy-YC11 and dual-asymmetric bi-asy-YC9 and bi-asy-YC12 are developed. They share the same asymmetric D(1)AD(2) (D-1=thieno[3,2-b]thiophene and D-2=selenopheno[3,2-b]thiophene) fused-core but have different unidirectional sidechain on D-1 side, allowing fine-tuned molecular properties, such as intermolecular interaction, packing pattern, and crystallinity. Among the binary blends, the PM6 : bi-asy-YC12 one has better morphology with appropriate phase separation and higher order packing than the PM6 : asy-YC9 and PM6 : bi-asy-YC11 ones. Therefore, the PM6 : bi-asy-YC12-based OSCs offer a higher PCE of 17.16 % with both high V-oc and J(sc), due to the reduced E-loss and efficient charge transfer properties. Inspired by the high V-oc and strong NIR-absorption, bi-asy-YC12 is introduced into efficient binary PM6 : L8-BO to construct ternary OSCs. Thanks to the broadened absorption, optimized morphology, and furtherly minimized E-loss, the PM6 : L8-BO : bi-asy-YC12-based OSCs achieve a champion PCE of 19.23 %, which is one of the highest efficiencies among these annealing-free devices. Our developed unidirectional sidechain engineering for constructing bi-asymmetric Y-series acceptors provides an approach to boost PCE of OSCs.
|
|
| 5. |
- Luo, Yifei, et al.
(författare)
-
Technology Roadmap for Flexible Sensors
- 2023
-
Ingår i: ACS Nano. - : American Chemical Society. - 1936-0851 .- 1936-086X. ; 17:6, s. 5211-5295
-
Forskningsöversikt (refereegranskat)abstract
- Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.
|
|
| 6. |
- Yuan, Shichen, et al.
(författare)
-
Balancing Charge Injection via a Tailor-Made Electron-Transporting Material for High Performance Blue Perovskite QLEDs
- 2023
-
Ingår i: ACS Energy Letters. - : AMER CHEMICAL SOC. - 2380-8195. ; 8:1, s. 818-826
-
Tidskriftsartikel (refereegranskat)abstract
- One of the great challenges in perovskite quantum dot light-emitting diodes (Pe-QLEDs) is the unbalanced charge injection that significantly hinders the device performance and stability. Herein, we tailor-made a high mobility electron-transporting material (ETM), named B2, to balance the carrier injection in blue Pe-QLEDs. B2 with a tailored asymmetric anthracenyl structure exhibits a promising electron mobility of 2.7 x 10(-4) cm(2)center dot V-1 center dot s(-1), which is almost 20 times higher than the commonly used ETM-TPBi (1.1 x 10(-5) cm(2)center dot V-1 center dot s(-1)). Subsequently, sky blue (490 nm) Pe-QLED with B2 as the ETM presented a remarkably high external quantum efficiency (EQE) of 13.17% and a low turn-on voltage of 2.2 V, which is much better than that of the TPBi-based device (EQE of 8.31% and Vturn-on of 3.2 V). In addition, B2 also demonstrated a universal application in green and deep blue Pe-QLEDs. This work provides an important guidance to rational design of high electron mobility ETMs for high-performance LEDs.
|
|
| 7. |
- Dai, Yi, et al.
(författare)
-
Zn-doped CaFeO3 perovskite-derived high performed catalyst on oxygen reduction reaction in microbial fuel cells
- 2021
-
Ingår i: Journal of Power Sources. - : ELSEVIER. - 0378-7753 .- 1873-2755. ; 489
-
Tidskriftsartikel (refereegranskat)abstract
- Stable perovskite oxide is considered as a potential cathode for microbial fuel cells (MFCs). Herein, Zn is used as an effective element to modify the micro-structure and oxygen vacancy of perovskite to be a novel cathode catalyst. Physical characterizations show that due to partial volatilization at high temperature of Zn, perovskite forms hierarchically porous structures. Moreover, Zn is precipitated in electrochemical reaction to generate Zn vacancy in situ; thus, the active center of Fe has a superior interaction with oxygen-containing species, promoting the production of oxygen vacancy and forms a mixed valence state of Fe2+/Fe3+. The Zn-doped perovskite material CaFe0.7Zn0.3O3 exhibits remarkable oxygen reduction reaction (ORR) performances with outstanding onset potential (0.194 V vs. Ag/AgCl) and half-wave potential (-0.219 V vs. Ag/AgCl) under alkaline condition, which is better than Pt/C catalyst. Besides, CaFe0.7Zn0.3O3 shows an excellent four-electron pathway of ORR mechanism with remarkable corrosion resistance and stability, which enables a more reliable cathode electrocatalyst. The maximum power density of CaFe0.7Zn0.3O3 (892.10 +/- 90.79 mW m(-3)) testing on microbial fuel cell is comparable to the maximum power density (1012.86 +/- 84.03 mW m(-3)) of Pt/C. The findings of this work provide the feasibility of exploring inexpensive and high-performance cathode catalyst.
|
|
| 8. |
- Fan, Qunping, 1989, et al.
(författare)
-
High-performance all-polymer solar cells enabled by a novel low bandgap non-fully conjugated polymer acceptor
- 2021
-
Ingår i: Science in China Series B. - : Springer Nature. - 1674-7291 .- 1869-1870. ; 64, s. 1380-1388
-
Tidskriftsartikel (refereegranskat)abstract
- Anon-fully conjugated polymer as a new class of acceptor materials has shown some advantages over its small molecular counterpart when used in photoactive layers for all-polymer solar cells (all-PSCs), despite a low power conversion efficiency (PCE) caused by its narrow absorption spectra. Herein, a novel non-fully conjugated polymer acceptor PFY-2TS with a low bandgap of similar to 1.40 eV was developed, via polymerizing a large pi-fused small molecule acceptor (SMA) building block (namely YBO) with a non-conjugated thioalkyl linkage. Compared with its precursor YBO, PFY-2TS retains a similar low bandgap but a higher LUMO level. Moreover, compared with the structural analog of YBO-based fully conjugated polymer acceptor PFY-DTC, PFY-2TS shows similar absorption spectrum and electron mobility, but significantly different molecular crystallinity and aggregation properties, which results in optimal blend morphology with a polymer donor PBDB-T and better device physical processes in all-PSCs. As a result, PFY-2TS-based all-PSCs achieved a PCE of 12.31% with a small energy loss of 0.56 eV enabled by the reduced non-radiative energy loss (0.24 eV), which is better than that of 11.08% for the PFY-DTC-based ones. Our work clearly demonstrated that non-fully conjugated polymers as a new class of acceptor materials are very promising for the development of high-performance all-PSCs.
|
|
| 9. |
- Fan, Qunping, 1989, et al.
(författare)
-
Over 14% efficiency all-polymer solar cells enabled by a low bandgap polymer acceptor with low energy loss and efficient charge separation
- 2020
-
Ingår i: Energy & Environmental Science. - : Royal Society of Chemistry. - 1754-5692 .- 1754-5706. ; 13:12, s. 5017-5027
-
Tidskriftsartikel (refereegranskat)abstract
- Obtaining both high open-circuit voltage (V-oc) and short-circuit current density (J(sc)) has been a major challenge for efficient all-polymer solar cells (all-PSCs). Herein, we developed a polymer acceptor PF5-Y5 with excellent optical absorption capability (onset extending to similar to 880 nm and maximum absorption coefficient exceeding 105 cm(-1) in a film), high electron mobility (3.18 x 10(3) cm(2) V-1 s(-1)) and high LUMO level (-3.84 eV) to address such a challenge. As a result, the PBDB-T:PF5-Y5-based all-PSCs achieved a high power conversion efficiency of up to 14.45% with both a high Voc (0.946 V) and a high Jsc (20.65 mA cm(-2)), due to the high and broad absorption coverage, small energy loss (0.57 eV) and efficient charge separation and transport in the device, which are among the best values in the all-PSC field. In addition, the all-PSC shows a similar to 15% improvement in PCE compared to its counterpart small molecule acceptor (Y5)-based device. Our results suggest that PF5-Y5 is a very promising polymer acceptor candidate for applications in efficient all-PSCs.
|
|
| 10. |
- Li, Yuan, et al.
(författare)
-
Optimizing link rate assignment and transmission scheduling in WMN through compatible set generation
- 2016
-
Ingår i: Telecommunications Systems. - : SPRINGER. - 1018-4864 .- 1572-9451. ; 61:2, s. 325-335
-
Tidskriftsartikel (refereegranskat)abstract
- Radio links in wireless mesh networks (WMN) can select one of several modulation and coding schemes (MCS). A MCS assignment influences links data rates and their mutual interference, and therefore should be optimized. We consider joint optimization of link rate assignment and transmission scheduling in order to maximize the minimal flow in a WMN. One of the main difficulties stems from the requirement that each link has to use only one selected MCS for all its transmissions. This requirement leads to a complicated exact branch-and-price method, which is quite time-consuming for networks of practical size. Thus, we propose an original heuristic based on simulated annealing that utilizes specific characteristics of the problem. The method provides a balance between sub-optimality of the obtained solutions and the running time. The presented method is the main purpose and novelty of the paper. An extensive numerical study illustrates the effectiveness of the proposed approach.
|
|
