| 1. |
- Stroth, U., et al.
(författare)
-
Progress from ASDEX Upgrade experiments in preparing the physics basis of ITER operation and DEMO scenario development
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- An overview of recent results obtained at the tokamak ASDEX Upgrade (AUG) is given. A work flow for predictive profile modelling of AUG discharges was established which is able to reproduce experimental H-mode plasma profiles based on engineering parameters only. In the plasma center, theoretical predictions on plasma current redistribution by a dynamo effect were confirmed experimentally. For core transport, the stabilizing effect of fast ion distributions on turbulent transport is shown to be important to explain the core isotope effect and improves the description of hollow low-Z impurity profiles. The L-H power threshold of hydrogen plasmas is not affected by small helium admixtures and it increases continuously from the deuterium to the hydrogen level when the hydrogen concentration is raised from 0 to 100%. One focus of recent campaigns was the search for a fusion relevant integrated plasma scenario without large edge localised modes (ELMs). Results from six different ELM-free confinement regimes are compared with respect to reactor relevance: ELM suppression by magnetic perturbation coils could be attributed to toroidally asymmetric turbulent fluctuations in the vicinity of the separatrix. Stable improved confinement mode plasma phases with a detached inner divertor were obtained using a feedback control of the plasma β. The enhanced D α H-mode regime was extended to higher heating power by feedback controlled radiative cooling with argon. The quasi-coherent exhaust regime was developed into an integrated scenario at high heating power and energy confinement, with a detached divertor and without large ELMs. Small ELMs close to the separatrix lead to peeling-ballooning stability and quasi continuous power exhaust. Helium beam density fluctuation measurements confirm that transport close to the separatrix is important to achieve the different ELM-free regimes. Based on separatrix plasma parameters and interchange-drift-Alfvén turbulence, an analytic model was derived that reproduces the experimentally found important operational boundaries of the density limit and between L- and H-mode confinement. Feedback control for the X-point radiator (XPR) position was established as an important element for divertor detachment control. Stable and detached ELM-free phases with H-mode confinement quality were obtained when the XPR was moved 10 cm above the X-point. Investigations of the plasma in the future flexible snow-flake divertor of AUG by means of first SOLPS-ITER simulations with drifts activated predict beneficial detachment properties and the activation of an additional strike point by the drifts.
|
|
| 2. |
- Meyer, H.F., et al.
(författare)
-
Overview of physics studies on ASDEX Upgrade
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Forskningsöversikt (refereegranskat)abstract
- The ASDEX Upgrade (AUG) programme, jointly run with the EUROfusion MST1 task force, continues to significantly enhance the physics base of ITER and DEMO. Here, the full tungsten wall is a key asset for extrapolating to future devices. The high overall heating power, flexible heating mix and comprehensive diagnostic set allows studies ranging from mimicking the scrape-off-layer and divertor conditions of ITER and DEMO at high density to fully non-inductive operation (q 95 = 5.5, ) at low density. Higher installed electron cyclotron resonance heating power 6 MW, new diagnostics and improved analysis techniques have further enhanced the capabilities of AUG. Stable high-density H-modes with MW m-1 with fully detached strike-points have been demonstrated. The ballooning instability close to the separatrix has been identified as a potential cause leading to the H-mode density limit and is also found to play an important role for the access to small edge-localized modes (ELMs). Density limit disruptions have been successfully avoided using a path-oriented approach to disruption handling and progress has been made in understanding the dissipation and avoidance of runaway electron beams. ELM suppression with resonant magnetic perturbations is now routinely achieved reaching transiently . This gives new insight into the field penetration physics, in particular with respect to plasma flows. Modelling agrees well with plasma response measurements and a helically localised ballooning structure observed prior to the ELM is evidence for the changed edge stability due to the magnetic perturbations. The impact of 3D perturbations on heat load patterns and fast-ion losses have been further elaborated. Progress has also been made in understanding the ELM cycle itself. Here, new fast measurements of and E r allow for inter ELM transport analysis confirming that E r is dominated by the diamagnetic term even for fast timescales. New analysis techniques allow detailed comparison of the ELM crash and are in good agreement with nonlinear MHD modelling. The observation of accelerated ions during the ELM crash can be seen as evidence for the reconnection during the ELM. As type-I ELMs (even mitigated) are likely not a viable operational regime in DEMO studies of 'natural' no ELM regimes have been extended. Stable I-modes up to have been characterised using -feedback. Core physics has been advanced by more detailed characterisation of the turbulence with new measurements such as the eddy tilt angle - measured for the first time - or the cross-phase angle of and fluctuations. These new data put strong constraints on gyro-kinetic turbulence modelling. In addition, carefully executed studies in different main species (H, D and He) and with different heating mixes highlight the importance of the collisional energy exchange for interpreting energy confinement. A new regime with a hollow profile now gives access to regimes mimicking aspects of burning plasma conditions and lead to nonlinear interactions of energetic particle modes despite the sub-Alfvénic beam energy. This will help to validate the fast-ion codes for predicting ITER and DEMO.
|
|
| 3. |
- Kehoe, Laura, et al.
(författare)
-
Make EU trade with Brazil sustainable
- 2019
-
Ingår i: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 364:6438, s. 341-
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)
|
|
| 4. |
- Mullier, G.A., et al.
(författare)
-
Operation and performance of the ATLAS semiconductor tracker in LHC Run 2
- 2022
-
Ingår i: Journal of Instrumentation. - : IOP Publishing Ltd. - 1748-0221. ; 17:1
-
Tidskriftsartikel (refereegranskat)abstract
- The semiconductor tracker (SCT) is one of the tracking systems for charged particles in the ATLAS detector. It consists of 4088 silicon strip sensor modules. During Run 2 (2015-2018) the Large Hadron Collider delivered an integrated luminosity of 156 fb−1 to the ATLAS experiment at a centre-of-mass proton-proton collision energy of 13 TeV. The instantaneous luminosity and pile-up conditions were far in excess of those assumed in the original design of the SCT detector. Due to improvements to the data acquisition system, the SCT operated stably throughout Run 2. It was available for 99.9% of the integrated luminosity and achieved a data-quality efficiency of 99.85%. Detailed studies have been made of the leakage current in SCT modules and the evolution of the full depletion voltage, which are used to study the impact of radiation damage to the modules. © 2022 CERNüäβ
|
|
| 5. |
- Suarez, J. A., et al.
(författare)
-
Autothermal fluidized bed pyrolysis of Cuban pine sawdust
- 2006
-
Ingår i: Energy Sources Part a-Recovery Utilization and Environmental Effects. - : Informa UK Limited. - 1556-7036 .- 1556-7230. ; 28:8, s. 695-704
-
Tidskriftsartikel (refereegranskat)abstract
- Oxidative pyrolysis of Cuban pine sawdust was investigated using an autothermal fluidized bed reactor. Biomass particles were fed continuously (8.13 Kg/h) in a bed, fluidized by air gas. Experiments were conduced at three different dimensionless air factors 1, 1.5, and 2 (defined as ratio of actual air flow rate to stoichiometric air flow rate). The various physical and chemical characteristics of the pyrolysis products acquired in these conditions were identified. The results indicated that (1) the operating temperature can be correlated with the air factor; (2) the higher air factor promotes high temperature and contributes to the secondary reactions, which lead to less liquid; (3) the physicochemical characterization of the pyrolysis products indicated that the air factor, in the range studied, does not have a notable influence in their properties; (4) the liquid and char products obtained may be a potentially valuable source of chemical feedstocks.
|
|
| 6. |
|
|
| 7. |
- Castro-González, A., et al.
(författare)
-
The K2-OjOS Project*New and revisited planets and candidates in K2 campaigns 5, 16, & 18
- 2022
-
Ingår i: Monthly Notices of the Royal Astronomical Society. - : Oxford University Press (OUP). - 0035-8711 .- 1365-2966. ; 509:1, s. 1075-1095
-
Tidskriftsartikel (refereegranskat)abstract
- We present the first results of K2-OjOS, a collaborative project between professional and amateur astronomers primarily aimed to detect, characterize, and validate new extrasolar planets. For this work, 10 amateur astronomers looked for planetary signals by visually inspecting the 20 427 light curves of K2 campaign 18 (C18). They found 42 planet candidates, of which 18 are new detections and 24 had been detected in the overlapping C5 by previous works. We used archival photometric and spectroscopic observations, as well as new high-spatial resolution images in order to carry out a complete analysis of the candidates found, including a homogeneous characterization of the host stars, transit modelling, search for transit timing variations and statistical validation. As a result, we report four new planets (K2-355 b, K2-356 b, K2-357 b, and K2-358 b) and 14 planet candidates. Besides, we refine the transit ephemeris of the previously published planets and candidates by modelling C5, C16 (when available) and C18 photometric data jointly, largely improving the period and mid-transit time precision. Regarding individual systems, we highlight the new planet K2-356 b and candidate EPIC 211537087.02 being near a 2:1 period commensurability, the detection of significant TTVs in the bright star K2-184 (V = 10.35), the location of K2-103 b inside the habitable zone according to optimistic models, the detection of a new single transit in the known system K2-274, and the disposition reassignment of K2-120 b, which we consider as a planet candidate as the origin of the signal cannot be ascertained.
|
|
| 8. |
- Lopes-Martínez, I., et al.
(författare)
-
Problemas de codificación de productos que afectan la gestión deinventarios: Caso de estudio en empresas cubanas [Problems of code of products that affect the inventory management: Cuban companies case study]
- 2014
-
Ingår i: Dyna. - : Universidad Nacional de Colombia. - 0012-7353 .- 2346-2183. ; 81:187, s. 64-72
-
Tidskriftsartikel (refereegranskat)abstract
- Numerous code systems and classification of products and services exist globally, being tendency the standardization of them in the supply chains to achieve higher integration. The correct use of these systems is considered essential in the effectiveness in the inventory management, given its direct relationship with the registration of the primary information and tracing of the products. However, the scientific literature and the academic programs concentrate mostly on the Auto-ID technologies more than in the code structure and the consequences of an incorrect use of the code. The present article reflects the main deficiencies possible to detect in the systems of code of products, using a sample of companies in Cuba. The consequences of these deficiencies are discussed and it is also included a proposal of organization of the code for the Cuban companies. © The author; licensee Universidad Nacional de Colombia.
|
|
| 9. |
|
|
| 10. |
|
|
