| 1. |
|
|
| 2. |
- Kreter, A., et al.
(författare)
-
Deuterium retention in different carbon materials exposed in TEXTOR :
- 2008
-
Ingår i: PROCEEDINGS OF THE 17TH INTERNATIONAL VACUUM CONGRESS/13TH INTERNATIONAL CONFERENCE ON SURFACE SCIENCE/INTERNATIONAL CONFERENCE ON NANOSCIENCE AND TECHNOLOGY. - Bristol : IOP PUBLISHING LTD. ; , s. 062024-
-
Konferensbidrag (refereegranskat)abstract
- CFC NB31, CFC DMS780 and fine-grain graphite EK98 were simultaneously exposed in the SOL of TEXTOR in order to measure the retention of deuterium in the material bulk. After exposure, the samples were analysed by thermal desorption spectrometry and nuclear reaction analysis with a conventional beam as well as with a microbeam. The deuterium retention amounts (2-4).10(21) D/m(2) for the incident fluence of similar to 2.10(25) D/m(2). The retention values are similar for both CFC materials and lower by similar to 20-40% for EK98. The retention in all three materials scales roughly with a square root of incident fluence without saturation for the range of fluences obtained. The majority of deuterium is stored in a surface layer of <8 mu m. However, in NB31 deuterium is detectable as deep as 80 mu m. The in-bulk retention estimated for a TEXTOR experimental campaign of approximate to 7500 s of plasma has a contribution of approximate to 10% to the total retention, which is dominated by deuterium-carbon co-deposition.
|
|
| 3. |
- Krieger, K., et al.
(författare)
-
Be wall sources and migration in L-mode discharges after Be evaporation in the JET tokamak
- 2009
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 390-91, s. 110-114
-
Tidskriftsartikel (refereegranskat)abstract
- First wall material erosion and migration after fresh Be evaporation in the JET tokamak were studied in a series of consecutive identical L-mode discharges. The evolution of Be and C wall and divertor sources towards steady state conditions after deposition of a finite amount of Be at the carbon first wall of JET by the beryllium evaporation procedure provides a data set for benchmarking impurity transport simulations. Furthermore the experiment serves as a reference case for comparison of Be erosion to that of the planned ITER-like wall experiment with mainly Be plasma facing components (PFCs) in the main chamber. The experimental results confirm the migration pattern obtained by campaign integrated accounting of impurity sources and sinks, which is characterised by the main chamber wall and outer divertor as erosion dominated zones and migration of eroded material predominantly to the inner divertor where the material is finally deposited at the target plates.
|
|
