| 1. |
|
|
| 2. |
- Bickham, S., et al.
(författare)
-
Low cutoff G.657-compatible fiber for data center interconnects operating in the 1064 and 1310 nm windows
- 2020
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 11286
-
Konferensbidrag (refereegranskat)abstract
- Optical interconnects in data centers have traditionally used 850 nm GaAs-based vertical-cavity surface-emitting lasers (VCSELs) in combination with multimode fiber, having a reach up to 100 m in length. Longer links typically use standard single-mode fiber in conjunction with either InP-based edge-emitting lasers or silicon photonic transmitters operating in the 1310 nm or 1550 nm window. Single-mode GaAs-based VCSELs operating at 1064 nm offer another path for achieving longer system reach. Potential advantages of these VCSELs include better power efficiency, modulation speeds reaching 50 Gbps and large-scale fabrication volumes. The longer wavelength is also beneficial due to the lower attenuation and chromatic dispersion of optical fibers at that wavelength. However, one practical issue for single-mode transmission is that the G.657 standard for single-mode fiber requires that the 22-meter cable cutoff wavelength be less than 1260 nm, and these fibers are typically few-moded at 1064 nm. The large differences between the group velocities of the LP01 and LP11 modes can lead to degradation of the system performance due to multi-path interference if the higher order modes are present. To resolve this quandary, we have designed and validated the performance of a new optical fiber which is single-moded at wavelengths less than 1064 nm, but also has G.657-compliant mode field diameter and dispersion characteristics that enable it to be used in the 1310 nm window.
|
|
| 3. |
- Dehlin, S., et al.
(författare)
-
Practical application of a newly developed automated building energy-analysis software module prototype
- 2012
-
Ingår i: eWork and eBusiness in Architecture, Engineering and Construction. - Boca Raton : CRC Press, Taylor & Francis Group. - 9780415621281 ; , s. 45-49
-
Konferensbidrag (refereegranskat)abstract
- One key challenge when it comes to developing industrial building concepts for the housing industry is improving the energy performance of buildings, while at the same time ensuring that the end product remains affordable and attractive to customers. This paper summarises the findings from the application of a newly developed prototype for an automated energy-analysis software module in a real-life project.The prototype is used for the energy analysis of the low-energy, multi-family residential P303 concept developed by NCC Construction Sverige AB - a leading construction and development company in the Nordic region. A building concept is based on continuity and repetitions of most of the building components. Most of its characteristics are known and defined beforehand and only a few parameters vary due to the adaptation of the concept, for example, the configuration or site location. In energy performance calculations, the proposed energy-analysis software module prototype processes the known parameters as constants and only varies the unknown parameters. The energy calculations are then carried out by the calculation kernel from the dynamic building simulation software module, VIP Energy, and the result is exported to an Excel spreadsheet where it is presented in a table. This makes it possible, in a practical manner, to execute a larger number of performance analyses in a shorter time, investigating different design alternatives and configurations and thereby facilitating optimisation towards the best possible design solution. The case study presented in this paper simulated energy losses through the building envelope of a real P303 building. The parameters that were varied are the location and orientation of the building and various energy characteristics of windows/glazing.
|
|
| 4. |
- Maroju, Praveen K., et al.
(författare)
-
A Novel Attosecond Timing Tool for Free-Electron Laser Experiment
- 2020
-
Ingår i: High Intensity Lasers and High Field Phenomena 2020. - 9781943580736
-
Konferensbidrag (refereegranskat)abstract
- We demonstrate a novel timing tool for Free-Electron Lasers to determine the delay between an attosecond pulse train and infrared pulse with sub-optical-cycle resolu-. tion.
|
|
