| 1. |
- Moreau, V., et al.
(författare)
-
Pool CFD modelling : lessons from the SESAME project
- 2019
-
Ingår i: Nuclear Engineering and Design. - : ELSEVIER SCIENCE SA. - 0029-5493 .- 1872-759X. ; 355
-
Tidskriftsartikel (refereegranskat)abstract
- The current paper describes the Computational Fluid-Dynamics (CFD) modelling of Heavy Liquid Metal (HLM) flows in a pool configuration and in particular how this is approached within the Horizon 2020 SESAME project. SESAME's work package structure, based on a systematic approach of redundancy and diversification, is explained along with its motivation. The main achievements obtained and the main lessons learned during the project are illustrated. The paper focuses on the strong coupling between the experimental activities and CFD simulations performed within the SESAME project. Two different HLM fluids are investigated: pure lead and Lead-Bismuth Eutectic. The objective is to make CFD a valid instrument used during the design of safe and innovative Gen-IV nuclear plants. Some effort has also been devoted to Proper Orthogonal Decomposition with Galerkin projection modelling (POD-Galerkin), a reduced order model suited for Uncertainty Quantification that operates by post-processing CFD results. Assessment of Uncertainty highly improves the reliability of CFD simulations. Dedicated experimental campaigns on heavily instrumented facilities have been conceived with the specific objective to build a series of datasets suited for the calibration and validation of the CFD modelling. In pool configuration, the attention is focused on the balance between conductive and convective heat transfer phenomena, on transient test-cases representative of incidental scenarios and on the possible occurrence of solidification phenomena. Four test sections have been selected to generate the datasets: (i) the CIRCE facility from ENEA, (ii) the TALL-3D pool test section from KTH, (iii) the TALL-3D Solidification Test Section (STS) from KTH and (iv) the SESAME Stand facility from CVR. While CIRCE and TALL-3D were existing facilities, the STS and SESAME Stand facility have been conceived, built and operated within the project, heavily relying on the use of CFD support. Care has been taken to ensure that almost all tasks were performed by at least two partners. Specific examples are given on how this strategy has allowed to uncover flaws and overcome pitfalls. Furthermore, an overview of the performed work and the achieved results is presented, as well as remaining or new uncovered issues. Finally, the paper is concluded with a description of one of the main goals of the SESAME project: the construction of the Gen-IV ALFRED CFD model and an investigation of its general circulation.
|
|
| 2. |
- Eriksson, Dennis, et al.
(författare)
-
Options to Reform the European Union Legislation on GMOs : Post-authorization and Beyond
- 2020
-
Ingår i: Trends in Biotechnology. - : Elsevier BV. - 0167-7799 .- 1879-3096. ; 38:5, s. 465-467
-
Tidskriftsartikel (refereegranskat)abstract
- We discuss options to reform the EU genetically modified organism (GMO) regulatory framework, make risk assessment and decision-making more consistent with scientific principles, and lay the groundwork for international coherence. In this third of three articles, we focus on labeling and coexistence as well as discuss the political reality and potential ways forward.
|
|
| 3. |
- Evans, D. L., et al.
(författare)
-
Sustainable futures over the next decade are rooted in soil science
- 2022
-
Ingår i: European Journal of Soil Science. - : Wiley. - 1351-0754 .- 1365-2389. ; 73:1
-
Tidskriftsartikel (refereegranskat)abstract
- The importance of soils to society has gained increasing recognition over the past decade, with the potential to contribute to most of the United Nations’ Sustainable Development Goals (SDGs). With unprecedented and growing demands for food, water and energy, there is an urgent need for a global effort to address the challenges of climate change and land degradation, whilst protecting soil as a natural resource. In this paper, we identify the contribution of soil science over the past decade to addressing gaps in our knowledge regarding major environmental challenges: climate change, food security, water security, urban development, and ecosystem functioning and biodiversity. Continuing to address knowledge gaps in soil science is essential for the achievement of the SDGs. However, with limited time and budget, it is also pertinent to identify effective methods of working that ensure the research carried out leads to real-world impact. Here, we suggest three strategies for the next decade of soil science, comprising a greater implementation of research into policy, interdisciplinary partnerships to evaluate function trade-offs and synergies between soils and other environmental domains, and integrating monitoring and modelling methods to ensure soil-based policies can withstand the uncertainties of the future. Highlights: We highlight the contributions of soil science to five major environmental challenges since 2010. Researchers have contributed to recommendation reports, but work is rarely translated into policy. Interdisciplinary work should assess trade-offs and synergies between soils and other domains. Integrating monitoring and modelling is key for robust and sustainable soils-based policymaking.
|
|
| 4. |
- Notarnicola, A., et al.
(författare)
-
Autoantibodies against a subunit of mitochondrial respiratory chain complex I in inclusion body myositis
- 2023
-
Ingår i: Annals of the Rheumatic Diseases. - : BMJ. - 0003-4967 .- 1468-2060. ; 82, s. 574-574
-
Tidskriftsartikel (refereegranskat)abstract
- Background Autoantibodies are found in up to 80% of patients with idiopathic inflammatory myopathies (IIM) and are associated with distinct clinical phenotypes [1]. Autoantibodies targeting cytosolic 5´-nucleotidase 1A (anti-cN1A) are currently the only known serum biomarker for the subgroup inclusion body myositis (IBM) (2), although detected even in other autoimmune diseases.Objectives To identify new autoimmune targets in IIM by antigen bead array assay.Methods In a first cross-sectional exploratory study, 357 antigens representing 268 proteins were incubated with plasma samples from 219 IIM (108 Polymyositis (PM), 80 Dermatomyositis (DM) and 31 IBM) patients, 349 Systemic Lupus Erythematosus (SLE) patients and 306 population controls for screening of IgG reactivity by antigen bead array. All samples were identified in the local biobank of the Rheumatology clinic, Karolinska University Hospital. Interesting results obtained for the IBM subgroup were then validated in an independent larger cohort of 287 patients with IBM followed at nine European rheumatological or neurological centers. IBM serum samples were explored by antigen bead array and results validated by western blot. As controls, serum samples from 30 patients with PM and 30 with DM, HLA-matched with the IBM Swedish cohort, were included. Demographics, laboratory, clinical, and muscle biopsy data of the IBM cohort was retrieved.Results In the exploratory study IgG reactivity towards NADH dehydrogenase 1 α subcomplex 11 (NDUFA11), a subunit of the membrane-bound mitochondrial respiratory chain complex I, was discovered with higher frequency in the IBM (9,7%) than PM (2,8%) and DM samples (2,5%), although the difference was not statistically significant. Anti-NDUFA11 IgG was also found in 2,3% of SLE and 2,6% of population control samples. In the validation study anti-NDUFA11 autoantibodies were detected in 11/287 IBM patients (3,8%), 0/30 PM and 0/30 DM patients. Reactivity against NDUFA11 could be confirmed by western blot (Table 1, Figure 1). The eleven anti-NDUFA11 positive patients showed a trend of lower frequency of wheelchair/walker ever use and higher creatine kinase levels at time of IBM diagnosis compared to the anti-NDUFA11 negative group. Ragged red fibers were significantly more prevalent in anti-NDUFA11 positive than negative patients (p=0.04). Anti-cN1A autoantibodies were detected in 98/287 (34,1%) of IBM, 3/30 (10%) DM and 9/29 (31%) PM patients, p=0.03. Coexistence of anti NDUFA11 and anti-cN1A antibodies was observed in 3 IBM patients.Conclusion Our results reveal a new autoimmune target in the mitochondrial respiratory chain complex I that might be specifically associated with IBM. This is of particular interest as mitochondrial abnormalities are known histological findings in muscle biopsies of IBM patients.References [1]Galindo-Feria AS, Wang G, Lundberg IE. Autoantibodies: Pathogenic or epiphenomenon. Best Pract Res Clin Rheumatol. 2022;36(2):101767.[2]Herbert MK,et al. Disease specificity of autoantibodies to cytosolic 5’-nucleotidase 1A in sporadic inclusion body myositis versus known autoimmune diseases. Ann Rheum Dis. 2016;75(4):696-701.
|
|
| 5. |
- Palmroth, Minna, et al.
(författare)
-
Lower-thermosphere-ionosphere (LTI) quantities : current status of measuring techniques and models
- 2021
-
Ingår i: Annales Geophysicae. - : Copernicus Publications. - 0992-7689 .- 1432-0576. ; 39:1, s. 189-237
-
Tidskriftsartikel (refereegranskat)abstract
- The lower-thermosphere-ionosphere (LTI) system consists of the upper atmosphere and the lower part of the ionosphere and as such comprises a complex system coupled to both the atmosphere below and space above. The atmospheric part of the LTI is dominated by laws of continuum fluid dynamics and chemistry, while the ionosphere is a plasma system controlled by electromagnetic forces driven by the magnetosphere, the solar wind, as well as the wind dynamo. The LTI is hence a domain controlled by many different physical processes. However, systematic in situ measurements within this region are severely lacking, although the LTI is located only 80 to 200 km above the surface of our planet. This paper reviews the current state of the art in measuring the LTI, either in situ or by several different remote-sensing methods. We begin by outlining the open questions within the LTI requiring high-quality in situ measurements, before reviewing directly observable parameters and their most important derivatives. The motivation for this review has arisen from the recent retention of the Daedalus mission as one among three competing mission candidates within the European Space Agency (ESA) Earth Explorer 10 Programme. However, this paper intends to cover the LTI parameters such that it can be used as a background scientific reference for any mission targeting in situ observations of the LTI.
|
|
| 6. |
- Ravishankar, Ajith Padyana, et al.
(författare)
-
Fabrication of self-organized InP nanopillars by ion-bombardment for optoelectronic applications
- 2019
-
Ingår i: 2019 IEEE 14th Nanotechnology Materials and Devices Conference, NMDC 2019. - : Institute of Electrical and Electronics Engineers Inc.. - 9781728126371
-
Konferensbidrag (refereegranskat)abstract
- In this work, we investigate a wafer-scale, lithography-free, self-assembled indium phosphide (InP) nanopillars fabrication method based on ion bombardment. The influence of process conditions, such as the substrate temperature, ion beam energy, ion beam incidence angle, and processing time, were investigated with regard to the geometry (shape, diameter and height) and density of the fabricated nanopillars. For optimized process conditions, we show that by controlling the ion beam incidence angle (while rotating the sample), the shape (tapered to cylindrical) and average diameter (~75-150 nm) can be tuned and where InP nanopillar heights of ~600 nm were realized. It is shown that by modifying the shapes of the InP nanopillars, broadband anti-reflection can be obtained with average reflectance as low as ~4% in the wavelength range of 400-900 nm.
|
|
| 7. |
- Schenk, Linda, 1980-, et al.
(författare)
-
Industry Derived Occupational Exposure Limits : A Survey of Professionals on the Dutch System of Exposure Guidelines
- 2019
-
Ingår i: Annals of Work Exposures and Health. - : Oxford University Press. - 2398-7308 .- 2398-7316. ; 63:9, s. 1004-1012
-
Tidskriftsartikel (refereegranskat)abstract
- The Netherlands' system for occupational exposure limits (OELs) encompasses two kinds of OELs: public and private. Public OELs are set by the government. Private OELs are derived by industry and cover all substances without a public OEL. In parallel, the regulation concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) has introduced an exposure guidance value similar to the OEL, namely the Derived No-Effect Level (DNEL) for workers' inhalation exposure. This study aimed to investigate issues encountered by occupational health professionals regarding private OELs, and how they perceive the DNELs for workers in relation to private OELs. Towards this aim, we sent out a web-based questionnaire to the members of the Dutch professional organization for occupational hygienists (Nederlandse Vereniging voor Arbeidshygiene [NVVA], n = 513) and to members of the Dutch professional organization for safety engineers (NVVK, n = 2916). Response rates were 27% (n = 139) and 7% (n = 198), respectively. More occupational hygienists (59%) than safety engineers (17%) reported to derive private OELs themselves. Our respondents reported several challenges with the derivation of private OELs. Fifty-one percent of the occupational hygienists and 20% of the safety engineers stated to see a role of REACH Registrants' worker DNELs as private OELs. However, more than half of our respondents were undecided or unfamiliar with worker DNELs. In addition, stated opinions on where worker DNELs fit in the hierarchy of private OELs varied considerably. To conclude, both these professional groups derive private OELs and stated that they need more guidance for this. Furthermore, there is a lack of clarity whether worker DNELs may qualify as private OELs, and where they would fit in the hierarchy of private OELs.
|
|
| 8. |
- van den Berg, P. A. W., et al.
(författare)
-
Fluorescence correlation spectroscopy of flavins and flavoenzymes : photochemical and photophysical aspects
- 2001
-
Ingår i: Spectrochimica Acta Part A - Molecular and Biomolecular Spectroscopy. - 1386-1425 .- 1873-3557. ; 57:11, s. 2135-2144
-
Tidskriftsartikel (refereegranskat)abstract
- Fluorescence Correlation Spectroscopy (FCS) was used to investigate the excited-state properties of flavins and flavoproteins in solution at the single molecule level. Flavin mononucleotide (FMN), flavin adenine dinucleotide (FAD) and lipoamide dehydrogenase served as model systems in which the flavin cofactor is either free in solution (FMN, FAD) or enclosed in a protein environment as prosthetic group (lipoamide dehydrogenase). Parameters such as excitation light intensity, detection time and chromophore concentration were varied in order to optimize the autocorrelation traces. Only in experiments with very low light intensity ( < 10 kW/cm(2)), FMN and FAD displayed fluorescence properties equivalent to those found with conventional fluorescence detection methods. Due to the high triplet quantum yield of FMN, the system very soon starts to build up a population of non-fluorescent molecules, which is reflected in an apparent particle number far too low for the concentration used. Intramolecular photoreduction and subsequent photobleaching may well explain these observations. The effect of photoreduction was clearly shown by titration of FMN with ascorbic acid. While titration of FMN with the quenching agent potassium iodide at higher concentrations ( > 50 mM of I-) resulted in quenched flavin fluorescence as expected, low concentrations of potassium iodide led to a net enhancement of the de-excitation rate from the triplet state., thereby improving the fluorescence signal. FCS experiments on FAD exhibited an improved photostability of FAD as compared to FMN: As a result of stacking of the adenine and flavin moieties, FAD has a considerably lower triplet quantum yield. Correlation curves of lipoamide dehydrogenase yielded correct values for the diffusion time and number of molecules at low excitation intensities. However, experiments at higher light intensities revealed a process which can be explained by photophysical relaxation or photochemical destruction of the enzyme. As the time constant of the process induced at higher light intensities resembles the diffusion time constant of free flavin, photodestruction with the concomitant release of the cofactor offers a reasonable explanation.
|
|
| 9. |
- Visser, Dennis, et al.
(författare)
-
Ion bombardment induced formation of self-organized wafer-scale GaInP nanopillar assemblies
- 2020
-
Ingår i: Journal of Vacuum Science and Technology B. - : AVS Science and Technology Society. - 2166-2746 .- 2166-2754. ; 38:1
-
Tidskriftsartikel (refereegranskat)abstract
- Ion sputtering assisted formation of nanopillars is demonstrated as a wafer-scale, lithography-free fabrication method to obtain high optical quality gallium indium phosphide (GaInP) nanopillars. Compared to binary materials, little has been reported on the formation of self-organized ternary nanostructures. Epitaxial (100) Ga0.51In0.49P layers lattice matched to GaAs were sputtered by nitrogen (N2) ions with relatively low ion beam energies (∼400 eV) to reduce ion bombardment induced damage. The influence of process parameters such as temperature, sputter duration, ion beam energy, and ion beam incidence angle on the pillar formation is investigated. The fabricated GaInP nanopillars have average diameters of ∼75-100 nm, height of ∼220 nm, and average density of ∼2-4 × 108 pillars/cm2. The authors show that the ion beam incidence angle plays an important role in pillar formation and can be used to tune the pillar shape, diameter, and spatial density. Specifically, tapered to near cylindrical pillar profiles together with a reduction in their average diameters are obtained by varying the ion beam incidence angle from 0° to 20°. A tentative model for the GaInP nanopillar formation is proposed based on transmission electron microscopy and chemical mapping analysis. μ-Photoluminescence and μ-Raman measurements indicate a high optical quality of the c-GaInP nanopillars.
|
|
