| 1. |
- Stjernbrandt, Albin, et al.
(författare)
-
Occupational cold exposure and symptoms of carpal tunnel syndrome : a population-based study
- 2022
-
Ingår i: BMC Musculoskeletal Disorders. - : BioMed Central. - 1471-2474. ; 23:1
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: Cold exposure is an underrecognized occupational hazard that may increase the risk of peripheral nerve entrapment. The aim of this study was to determine if self-reported occupational exposure to contact and ambient cooling was associated with symptoms of carpal tunnel syndrome (CTS).METHODS: In this mainly cross-sectional study, surveys were conducted on a population-based sample of men and women between 18 and 70 years of age, living in northern Sweden. Cold exposure and presence of symptoms suggestive of CTS were subjectively reported. Associations between exposure and outcome were evaluated using logistic regression.RESULTS: The study included 2,703 women and 2,314 men, with a median age of 60 years (interquartile range 19). Symptoms of CTS were reported by 453 (9.2%). Being highly occupationally exposed (almost always) to contact cooling of the hands was associated with reporting CTS (OR 3.20; 95% CI 1.62-6.33), as was ambient cooling (OR 2.00; 95% CI 1.03-3.88) and severe ambient cooling (OR 4.02 95% CI 2.09-7.71), after adjusting for age, gender, body mass index, current daily smoking, diabetes mellitus, joint disease, and hand-arm vibration exposure. The point estimates increased with longer daily exposure duration. For workers exposed to severe ambient cooling for more than half of their working hours, in addition to performing heavy manual handling every day, the OR for reporting CTS was 7.25 (95% CI 3.88-13.53), with a positive additive interaction effect (expressed as relative excess risk due to interaction) of 4.67.CONCLUSIONS: Self-reported occupational exposure to contact and ambient cooling was associated with symptoms suggestive of CTS. There were statistically significant positive exposure-response patterns for time spent exposed to contact and ambient cooling at work in relation to reporting symptoms of CTS. Positive additive interaction effects between cold exposure and heavy manual handling were also found. Since there was important potential uncontrolled confounding regarding repetitive wrist movements and forceful gripping, the results need to be confirmed by other studies, preferably with longitudinal design and more detailed exposure assessment.
|
|
| 2. |
- Stjernbrandt, Albin, et al.
(författare)
-
Occupational cold exposure is associated with upper extremity pain
- 2023
-
Ingår i: Frontiers in Pain Research. - : Frontiers Media S.A.. - 2673-561X. ; 4
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Occupational cold exposure is common in Sweden but potential impacts on musculoskeletal disorders have not been thoroughly investigated. The primary aim of this study was to determine the associations between occupational contact and ambient cooling in relation to pain in the upper extremity.Methods: In this cross-sectional study, a digital survey was conducted on a population-based sample of women and men between 24 and 76 years of age, living in northern Sweden. Occupational cold exposure, heavy manual handling, work with vibrating tools as well as the presence of upper extremity pain at different sites were subjectively reported. Associations between exposure and outcome were evaluated using multiple binary logistic regression.Results: The final study sample included 2,089 (54.4%) women and 1,754 men, with a mean age of 56 years. Hand pain was reported by 196 (5.2%), lower arm pain by 144 (3.8%), and upper arm pain by 451 (11.9%). Severe ambient cooling for more than half of the working time was statistically significantly associated with hand pain (OR: 2.30; 95% CI: 1.23–4.29) and upper arm pain (OR: 1.57; 95% CI: 1.00–2.47) but not lower arm pain (OR: 1.87; 95% CI: 0.96–3.65) after adjusting for gender, age, body mass index, current daily smoking, heavy manual handling, and work with vibrating tools.Conclusions: Occupational cold exposure was statistically significantly associated with hand pain and upper arm pain. Therefore, occupational cold exposure should be recognized as a potential risk factor for musculoskeletal disorders in the upper extremity.
|
|
| 3. |
- Abbasi, Saeed, et al.
(författare)
-
A study of airborne wear particles generated from organic railway brake pads and brake discs
- 2011
-
Ingår i: Wear. - UK : Elsevier. - 0043-1648 .- 1873-2577. ; 273:1, s. 93-99
-
Tidskriftsartikel (refereegranskat)abstract
- Brake pads on wheel-mounted disc brakes are often used in rail transport due to their good thermal properties and robustness. During braking, both the disc and the pads are worn. This wear process generates particles that may become airborne and thus affect human health. The long term purpose of ‘Airborne particles in Rail transport’ project is to gain knowledge on the wear mechanisms in order to find means of controlling the number and size distribution of airborne particles. In this regard, a series of full-scale field tests and laboratory tests with a pin-on-disc machine have been conducted. The morphology and the matter of particles, along with their size distribution and concentration, have been studied. The validity of results from the pin-on-disc simulation has been verified by the field test results. Results show an ultra-fine peak for particles with a diameter size around 100 nm in diameter, a dominant fine peak for particles with a size of around 350 nm in diameter, and a coarse peak with a size of 3-7 μm in diameter. Materials such as iron, copper, aluminium, chromium, cobalt, antimony, and zinc have been detected in the nano-sized particles.
|
|
| 4. |
|
|
| 5. |
- Alemani, Mattia, et al.
(författare)
-
On the influence of car brake system parameters on particulate matter emissions
- 2018
-
Ingår i: Wear. - : ELSEVIER SCIENCE SA. - 0043-1648 .- 1873-2577. ; 396, s. 67-74
-
Tidskriftsartikel (refereegranskat)abstract
- The influence of car brake system parameters on particulate matter emissions was investigated using a pin-on-disc tribometer. Samples from a low-steel friction material and a cast iron disc were tested for different sliding velocities, nominal contact pressures and frictional powers. Disc temperatures were also measured. Their impact on total concentration, size distribution, particle coefficient and transition temperature was analysed. Results show that frictional power is the most significant brake system parameter. However, temperature, as a response parameter, is the most influential, inducing a shift towards the ultrafine particulate fraction and raising emissions. A transition temperature, independent of the system parameters, was identified.
|
|
| 6. |
- Alemani, Mattia, et al.
(författare)
-
Scaling effects of measuring disc brake airborne particulate matter emissions – A comparison of a pin-on-disc tribometer and an inertia dynamometer bench under dragging conditions
- 2018
-
Ingår i: Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology. - : Sage Publications. - 1350-6501 .- 2041-305X. ; 232:12, s. 1538-1547
-
Tidskriftsartikel (refereegranskat)abstract
- An important contributor to non-exhaust emissions in urban areas is airborne particulate matter originating from brake systems. A well-established way to test such systems in industry is to use inertia dynamometer benches; although they are quite expensive to run. Pin-on-disc tribometers, on the other hand, are relatively cheap to run, but simplify the real system. The literature indicates promising correlations between these two test stands with regard to measured airborne number distribution. Recent studies also show a strong dependency between the airborne number concentration and the disc temperature. However, a direct comparison that also takes into account temperature effects is missing. The aim of this paper is, therefore, to investigate how the transition temperature is affected by the different test scales, under dragging conditions, and the effects on total concentration and size distribution. New and used low-steel pins/pads were tested against cast iron discs/rotors on both the aforementioned test stands, appositely designed for particulate emission studies. A constant normal load and constant rotational velocity were imposed in both test stands. Results show that a transition temperature can always be identified. However, it is influenced by the test scale and the frictional pair status. Nevertheless, emissions are assessed similarly when an equivalent frictional pair status is analysed (e.g. run-in). Further investigations for fully run-in samples on the pin-on-disc should be performed in order to finally assess the possibility of using the tribometers for the initial assessment of different friction materials.
|
|
| 7. |
- Athanassiou, N., et al.
(författare)
-
Simulation of thermal and mechanical performance of laser cladded disc brake rotors
- 2022
-
Ingår i: Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology. - London : SAGE Publications Ltd. - 1350-6501 .- 2041-305X. ; 236:1, s. 3-14
-
Tidskriftsartikel (refereegranskat)abstract
- Disc brakes wear during braking events and release airborne particulates. These particle emissions are currently one of the highest contributors to non-exhaust particle emissions and introduce health hazards as well as environmental contamination. To reduce this problem, wear and corrosion-resistant disc coatings have been implemented on grey cast iron brake disc rotors by using various deposition techniques such as thermal spraying and overlay welding. High thermal gradients during braking introduce risks of flaking off and cracking of thermally sprayed coatings with adhesive bonding to the substrate. Overlay welding by laser cladding offers metallurgical bonding of the coating to the substrate and other benefits that motivate laser cladding as a candidate for the coating of the grey cast iron brake discs. This study aims to investigate the effect of laser cladding on the thermal and thermo-structural performance of the coated grey cast iron brake discs. Therefore, thermal and thermo-stress analysis with COMSOL Multiphysics 5.6 software is performed on braking events of grey cast iron brake discs as non-coated – reference and laser cladding coated with stainless steel welding consumables. The Results demonstrated that surface temperatures were more localised, overall higher in the laser cladded coating with over three times the stresses attained of reference grey cast iron discs. The output of the simulations has been compared by tests found in the literature. Laser cladding presented higher reliability and braking performance, nonetheless requiring the evaluation of its thermal impact on other system components.
|
|
| 8. |
- Björ, Bodil, et al.
(författare)
-
Cold health impacts in northern Sweden
- 2016
-
Ingår i: International Journal of Circumpolar Health. - : Informa UK Limited. - 1239-9736 .- 2242-3982. ; 75:33200
-
Tidskriftsartikel (refereegranskat)
|
|
| 9. |
- Björ, Ove, et al.
(författare)
-
Reduced mortality rates in a cohort of long-term underground iron-ore miners
- 2013
-
Ingår i: American Journal of Industrial Medicine. - : Wiley. - 0271-3586 .- 1097-0274. ; 56:5, s. 531-540
-
Tidskriftsartikel (refereegranskat)abstract
- Background Historically, working in iron-ore mines has been associated with an increased risk of lung cancer and silicosis. However, studies on other causes of mortality are inconsistent and in the case of cancer incidence, sparse. The aim of this study was to examine the association between iron-ore mining, mortality and cancer incidence.Methods A 54-year cohort study on iron-ore miners from mines in northern Sweden was carried out comprising 13,000 workers. Standardized rate ratios were calculated comparing the disease frequency, mortality, and cancer incidence with that of the general population of northern Sweden. Poisson regression was used to evaluate the association between the durations of employment and underground work, and outcome.Results Underground mining was associated with a significant decrease in adjusted mortality rate ratios for cerebrovascular and digestive system diseases, and stroke. For several outcomes, elevated standardized rate ratios were observed among blue-collar workers relative to the reference population. However, only the incidence of lung cancer increased with employment time underground (P<0.001).Conclusions Long-term iron-ore mining underground was associated with lower rates regarding several health outcomes. This is possibly explained by factors related to actual job activities, environmental exposure, or the selection of healthier workers for long-term underground employment.Am. J. Ind. Med. 56:531540, 2013. (c) 2013 Wiley Periodicals, Inc.
|
|
| 10. |
- Burström, Lage, et al.
(författare)
-
A follow-up study of welders’ exposure to vibration in a heavy engineering production workshop
- 2010
-
Ingår i: Journal of Low Frequency Noise Vibration and Active Control. - : Sage Publications. - 0263-0923 .- 1461-3484 .- 2048-4046. ; 29:1, s. 33-39
-
Tidskriftsartikel (refereegranskat)abstract
- Manual work involving vibrating power tools is associated with symptoms that include vascular, neurological and musculoskeletal disorders. This study examines the vibration exposure of welders to determine the change between 1987 and 2008. Vibration measurements on handheld tools were used to evaluate the acceleration and the daily exposure time was determined by subjective rating. From these data, the 8-hour equivalent vibration exposure A(8), has been calculated. During the period, the A(8) decreased from 3.9 m/s2 to 1.9 m/s2. It was concluded that this decrease is the result of fewer vibrating tools and a decrease in daily exposure time. Although the daily vibration exposure has decreased over the study time, for some welders the daily vibration exposure A(8) is still above the action value set by the EU directive on vibration. This means more effort should be spent to decrease vibration exposure.
|
|
