SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Wang Guangting) "

Sökning: WFRF:(Wang Guangting)

  • Resultat 1-6 av 6
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Kristanl, Matej, et al. (författare)
  • The Seventh Visual Object Tracking VOT2019 Challenge Results
  • 2019
  • Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
  • Konferensbidrag (refereegranskat)abstract
    • The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
  •  
2.
  • Kristan, Matej, et al. (författare)
  • The Ninth Visual Object Tracking VOT2021 Challenge Results
  • 2021
  • Ingår i: 2021 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW 2021). - : IEEE COMPUTER SOC. - 9781665401913 ; , s. 2711-2738
  • Konferensbidrag (refereegranskat)abstract
    • The Visual Object Tracking challenge VOT2021 is the ninth annual tracker benchmarking activity organized by the VOT initiative. Results of 71 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in recent years. The VOT2021 challenge was composed of four sub-challenges focusing on different tracking domains: (i) VOT-ST2021 challenge focused on short-term tracking in RGB, (ii) VOT-RT2021 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2021 focused on long-term tracking, namely coping with target disappearance and reappearance and (iv) VOT-RGBD2021 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2021 dataset was refreshed, while VOT-RGBD2021 introduces a training dataset and sequestered dataset for winner identification. The source code for most of the trackers, the datasets, the evaluation kit and the results along with the source code for most trackers are publicly available at the challenge website(1).
  •  
3.
  • Ren, Shihuan, et al. (författare)
  • Near-infrared heavy-metal-free SnSe/ZnSe quantum dots for efficient photoelectrochemical hydrogen generation
  • 2021
  • Ingår i: Nanoscale. - : Royal Society of Chemistry. - 2040-3364 .- 2040-3372. ; 13:6, s. 3519-3527
  • Tidskriftsartikel (refereegranskat)abstract
    • Solar-driven photoelectrochemical (PEC) hydrogen production is one of the most effective strategies for solar-to-hydrogen energy conversion. Among various types of semiconductors used for PEC anodes, colloidal quantum dots (QDs) have been widely used as new and promising absorbers for PEC and other optoelectronic devices. However, currently, most efficient optoelectronic devices contain toxic Pb/Cd elements or non-earth-abundant elements (In/Ag). It is still a challenge to produce Pb/Cd-free QDs without using any toxic and non-earth-abundant elements. Here, we synthesized SnSe QDs via a diffusion-controlled hot injection approach and further stabilized the as-prepared SnSe QDs via a cation exchange reaction. The as-synthesized Zn-stabilized SnSe QDs (SnSe/ZnSe) have an orthorhombic crystal structure with indirect bandgaps ranging from 1 to 1.37 eV. Zn stabilization can significantly decrease the number of QD surface metallic Sn bonds, thereby decreasing the number of recombination centers of defects/traps. As a proof-of-concept, SnSe/ZnSe QDs are used as light absorbers for PEC hydrogen production, leading to a saturated photocurrent density of 7 mA cm−2, which is comparable to best values reported for PEC devices based on toxic-metal-free QDs. Our results indicate that Zn-stabilized SnSe QDs have great potential for use in emerging optoelectronic devices.
  •  
4.
  • Wang, Xiaohan, et al. (författare)
  • Colloidal carbon quantum dots as light absorber for efficient and stable ecofriendly photoelectrochemical hydrogen generation
  • 2021
  • Ingår i: Nano Energy. - : Elsevier. - 2211-2855 .- 2211-3282. ; 86
  • Tidskriftsartikel (refereegranskat)abstract
    • Solar-driven hydrogen production is one of the most promising strategies for solar-to-hydrogen energy conversion. Compared to inorganic quantum dots (QDs), carbon quantum dots (C-dots) have attracted a lot of attention for optoelectronic devices due to their structure-dependent optical properties and green composition. However, the solar-to-hydrogen conversion efficiency of most of the photoelectrochemical (PEC) devices based on colloidal QDs is still low. Here we demonstrated a highly efficient and stable ecofriendly PEC device using C-dots sensitized TiO2 photoanode, Pt loaded on carbon nanofibers as counter electrode, and glucose aqueous solution as electrolyte. The red-color C-dots were prepared using a solvothermal reaction, with an absorption spectrum ranging from 300 to 600 nm and a quantum yield (QY) of 50%. The C-dots have excitation independent photoluminescence peak positions and highly crystalline structure. The hydroxyl group on the C-dots can strongly interact with the TiO2, forming a very stable complex. Benefiting from these features, the PEC devices based on C-dots exhibit a saturated photocurrent density as high as ~4 mA/cm2 at 0.6 V vs. RHE and the device is very stable (keeping 95% of its initial value after 10-hour illumination upon 100 mW/cm2). This work indicates the promising properties of the C-dots/TiO2 system, which holds huge potential for applications in the fields of optoelectronic and catalytic devices.
  •  
5.
  • Liu, Guiju, et al. (författare)
  • Role of refractive index in highly efficient laminated luminescent solar concentrators
  • 2020
  • Ingår i: Nano Energy. - : Elsevier. - 2211-2855 .- 2211-3282. ; 70
  • Tidskriftsartikel (refereegranskat)abstract
    • As a large-area solar radiation collector, luminescent solar concentrators (LSCs) can be used as power generation units in semitransparent solar windows, modernized agricultural greenhouses and building facades. However, the external optical efficiency and long-term stability of the LSCs limit their practical applications due to the sensitivity of the emitters to the light and environmental conditions. Here, we used the concept of “laminated glass” to prepare LSCs, which consist of two waveguide layers and the quantum dots (QDs)/polymer interlayer, and we tune the refractive index of the different parts of the system to improve the external optical efficiency and stability of the LSCs, simultaneously. The waveguide layer can be glass, quartz, polymethyl methacrylate (PMMA) and other transparent materials. The CdSe/CdS core/shell QDs were used as fluorophores to prepare the interlayer of the LSCs. The external optical efficiency of the laminated LSCs is associated with the refractive index of the three layers: the closer the refractive index, the higher the ηopt. The highest external optical efficiency of 3.4% has been achieved for the laminated PMMA/QDs-polymer/PMMA LSCs, which improved ~92% compared to the single-layered CdSe/CdS based LSCs. To the best of our knowledge, this is the highest efficiency for the LSCs based on CdSe/CdS QDs. These results pave the way to realize high efficiency laminated windows as power generation units by suitably tuning the structure of the LSC, and provide the theoretical guidance for the LSCs utilized in building integrated photovoltaics.
  •  
6.
  • Zhao, Haiguang, et al. (författare)
  • Gram-scale synthesis of carbon quantum dots with a large Stokes shift for the fabrication of eco-friendly and high-efficiency luminescent solar concentrators
  • 2021
  • Ingår i: Energy & Environmental Science. - : Royal Society of Chemistry. - 1754-5692 .- 1754-5706. ; 14:1, s. 396-406
  • Tidskriftsartikel (refereegranskat)abstract
    • Luminescent solar concentrators (LSCs) are large-area sunlight collectors coupled to small area solar cells, for efficient solar-to-electricity conversion. The three key points for the successful market penetration of LSCs are: (i) removal of light losses due to reabsorption during light collection; (ii) high light-to-electrical power conversion efficiency of the final device; (iii) long-term stability of the LSC structure related to the stability of both the matrix and the luminophores. Among various types of fluorophores, carbon quantum dots (C-dots) offer a wide absorption spectrum, high quantum yield, non-toxicity, environmental friendliness, low-cost, and eco-friendly synthetic methods. However, they are characterized by a relatively small Stokes shift, compared to inorganic quantum dots, which limits the highest external optical efficiency that can be obtained for a large-area single-layer LSC (>100 cm2) based on C-dots below 2%. Herein, we report highly efficient large-area LSCs (100–225 cm2) based on colloidal C-dots synthesized via a space-confined vacuum-heating approach. This one batch reaction could produce Gram-scale C-dots with a high quantum yield (QY) (∼65%) using eco-friendly citric acid and urea as precursors. Thanks to their very narrow size distribution, the C-dots produced via the space-confined vacuum-heating approach had a large Stokes shift of 0.53 eV, 50% larger than C-dots synthesized via a standard solvothermal reaction using the same precursors with a similar absorption range. The large-area LSC (15 × 15 × 0.5 cm3) prepared by using polyvinyl pyrrolidone (PVP) polymer as a matrix exhibited an external optical efficiency of 2.2% (under natural sun irradiation, 60 mW cm−2, uncharacterized spectrum). After coupling to silicon solar cells, the LSC exhibited a power conversion efficiency (PCE) of 1.13% under natural sunlight illumination (20 mW cm−2, uncharacterized spectrum). These unprecedented results were obtained by completely suppressing the reabsorption losses during light collection, as proved by optical spectroscopy. These findings demonstrate the possibility of obtaining eco-friendly, high-efficiency, large-area LSCs through scalable production techniques, paving the way to the lab-to-fab transition of this kind of devices.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-6 av 6

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy