| 1. |
- Wang, J., et al.
(författare)
-
Final report of the CCQM-K145 : Toxic and essential elements in bovine liver
- 2020
-
Ingår i: Metrologia. - : IOP Publishing Ltd. - 0026-1394 .- 1681-7575. ; 57:1 A
-
Tidskriftsartikel (refereegranskat)abstract
- Liver plays a major role in metabolism and acts as a source of energy for the body by storing glycogen. With the growing interest and investigation in the biological effects in recent years, it is important and necessary to develop accurate and comparable analytical methods for elements in bio-samples. It has, however, been 10 years since the tissue sample (bovine liver) of CCQM-K49 key comparison. The purpose of CCQM-K145 is to ensure the comparable and traceable measurement results for essential and toxic elements such as P, S, Zn, Mn, Ni, Mo, Sr, Cr, Co, Pb, As and Hg in bovine liver among NMIs and other designated measurement bodies worldwide. The comparison was agreed by IAWG as 6th IAWG Benchmarking Exercise with Zn and Ni as exemplary elements at the meeting in Korea in the early October 2016. The results of CCQM-K145 are expected to cover the measurement capability and support CMCs claiming for inorganic elements in the similar biological tissue materials and food samples. 30 NMIs and DIs registered in CCQM-K145. With respect to the methodology, a variety of techniques such as IDMS, ICP-OES, ICP-MS(non-ID), AAS and NAA were adopted by the participants. For Zn, Ni, Sr, Pb and Hg measurements, most participants chose ID-ICP-MS method, which showed the better performance in terms of consistency and reliability of the measurement results. In aspect of the traceability for the measurement results in CCQM-K145, most participants used their own (in house) CRMs or other NMI's CRMs to guarantee trace to SI unit. Most participants used similar matrix CRMs for quality control or method validation. Base on different statistic way to calculate the reference mass fraction values and associated uncertainties for each measurand, removal of the suspected extreme values, and discussion at the IAWG meetings, the median values are proposed as the KCRV for Zn, Ni, Mn, Mo, Cr, Pb and Hg; the arithmetic mean values are proposed as the KCRV for P, S, Sr, Co and As. In general, the performances of the majority of CCQM-K145 participants are very good, illustrating their measurement capabilities for Zn, Ni, P, S, Mn, Mo, Sr, Cr, As, Co, Pb and Hg in a complex biological tissue matrix. Bovine liver contains many kinds of nutrients and microelements, it can be regarded as a typical representative material of biological tissue and food. In CCQM-K145, the analytes involved alkali metals and transition elements, metalloids/semi-metals and non metals with a range of mass fraction from mg/g to μg/kg. CCQM-K145 also tested the ability of NMIs/DIs to determine elements that were easy to be lost and polluted, and interfered significantly. The chemical pretreatment methods of samples used in the comparison is suitable for general food and biological matrix samples. A variety of measurement methods used in the comparison represent the main instrumental technology for elemental analysis. Therefore, for supporting CMC claim, CCQM-K145 is readily applicable to measurement of more elements in a wide range of biological materials (including liquids and solids) and meat products. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
|
|
| 2. |
|
|
| 3. |
- Fellinger, Joris, et al.
(författare)
-
Tungsten based divertor development for Wendelstein 7-X
- 2023
-
Ingår i: Nuclear Materials and Energy. - 2352-1791. ; 37
-
Tidskriftsartikel (refereegranskat)abstract
- Wendelstein 7-X, the world’s largest superconducting stellarator in Greifswald (Germany), started plasma experiments with a water-cooled plasma-facing wall in 2022, allowing for long pulse operation. In parallel, a project was launched in 2021 to develop a W based divertor, replacing the current CFC divertor, to demonstrate plasma performance of a stellarator with a reactor relevant plasma facing materials with low tritium retention. The project consists of two tasks: Based on experience from the previous experimental campaigns and improved physics modelling, the geometry of the plasma-facing surface of the divertor and baffles is optimized to prevent overloads and to improve exhaust. In parallel, the manufacturing technology for a W based target module is qualified. This paper gives a status update of project. It focusses on the conceptual design of a W based target module, the manufacturing technology and its qualification, which is conducted in the framework of the EUROfusion funded WPDIV program. A flat tile design in which a target module is made of a single target element is pursued. The technology must allow for moderate curvatures of the plasma-facing surface to follow the magnetic field lines. The target element is designed for steady state heat loads of 10 MW/m2 (as for the CFC divertor). Target modules of a similar size and weight as for the CFC divertor are assumed (approx. < 0.25 m2 and < 60 kg) using the existing water cooling infrastructure providing 5 l/s and roughly maximum 15 bar pressure drop per module. The main technology under qualification is based on a CuCrZr heat sink made either by additive manufacturing using laser powder bed fusion (LPBF) or by uniaxial diffusion welding of pre-machined forged CuCrZr plates. After heat treatment, the plasma-facing side of the heat sink is covered by W or if feasible by the more ductile WNiFe, preferably by coating or alternatively by hot isostatic pressing W based tiles with a soft OFE-Cu interlayer. Last step is a final machining of the plasma-exposed surface and the interfaces to the water supply lines and supports to correct manufacturing deformations.
|
|
| 4. |
|
|
| 5. |
- Hakonen, Aron, 1970, et al.
(författare)
-
Hand-Held Femtogram Detection of Hazardous Picric Acid with Hydrophobic Ag Nanopillar SERS Substrates and Mechanism of Elasto-Capillarity
- 2017
-
Ingår i: ACS Sensors. - : American Chemical Society (ACS). - 2379-3694. ; 2:2, s. 198-202
-
Tidskriftsartikel (refereegranskat)abstract
- Picric acid (PA) is a severe environmental and security risk due to its unstab e, toxic, and explosive properties. It is also challenging to detect in trace amounts and in situ because of its highly acidic and anionic character. Here, we assess sensing of PA under nonlaboratory conditions using surface-enhanced Raman scattering (SERS) silver nanopillar substrates and handheld Raman spectroscopy equipment. The advancing elasto-capillarity effects are explained by molecular dynamics simulations. We obtain a SERS PA detection limit on the order of 20 ppt, corresponding attomole amounts, which together with the simple analysis methodology demonstrates that the presented approach is highly competitive for ultrasensitive analysis in the field.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
- Park, M. S., et al.
(författare)
-
InAs/GaAs p-i-p quantum dots-in-a-well infrared photodetectors operating beyond 200 K
- 2014
-
Ingår i: Electronics Letters. - Stevenage, United Kingdom : Institution of Engineering and Technology (IET). - 1350-911X .- 0013-5194. ; 50:23, s. 1731-1732
-
Tidskriftsartikel (refereegranskat)abstract
- High-temperature operating performance of p-i-p quantum dots-in-awell infrared photodetectors (QDIPs) is successfully demonstrated. The optically active region consists of 10 layers of p-doped selfassembled InAs quantum dots (QDs) asymmetrically positioned in In0.15Ga0.85As quantum wells (QWs). The dark current is suppressed by an incorporated superlattice (SL) structure composed of 10 pairs of AlGaAs/GaAs heterostructure. The very low recorded dark current makes the fabricated p-i-p QDIPs suitable for high-temperature operation. The measured photoresponse reveals broad mid-wave infrared (MWIR) detection up to 200 K.
|
|
| 10. |
- Shoji, Y., et al.
(författare)
-
An Element-Substituted Cyclobutadiene Exhibiting High-Energy Blue Phosphorescence
- 2021
-
Ingår i: Angewandte Chemie International Edition. - : John Wiley and Sons Inc. - 1433-7851 .- 1521-3773. ; 60:40, s. 21817-21823
-
Tidskriftsartikel (refereegranskat)abstract
- 1,3,2,4-Diazadiboretidine, an isoelectronic heteroanalogue of cyclobutadiene, is an interesting chemical species in terms of comparison with the carbon system, whereas its properties have never been investigated experimentally. According to Baird's rule, Hückel antiaromatic cyclobutadiene acquires aromaticity in the lowest triplet state. Here we report experimental and theoretical studies on the ground- and excited-state antiaromaticity/aromaticity as well as the photophysical properties of an isolable 1,3,2,4-diazadiboretidine derivative. The crystal structure of the diazadiboretidine derivative revealed that the B2N2 ring adopts a planar rhombic geometry in the ground state. Yet, theoretical calculations showed that the B2N2 ring turns to a square geometry with a nonaromatic character in the lowest triplet state. Notably, the diazadiboretidine derivative has the lowest singlet and triplet states lying at close energy levels and displays blue phosphorescence.
|
|
