| 1. |
- Kristan, Matej, et al.
(författare)
-
The Visual Object Tracking VOT2015 challenge results
- 2015
-
Ingår i: Proceedings 2015 IEEE International Conference on Computer Vision Workshops ICCVW 2015. - : IEEE. - 9780769557205 ; , s. 564-586
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge 2015, VOT2015, aims at comparing short-term single-object visual trackers that do not apply pre-learned models of object appearance. Results of 62 trackers are presented. The number of tested trackers makes VOT 2015 the largest benchmark on short-term tracking to date. For each participating tracker, a short description is provided in the appendix. Features of the VOT2015 challenge that go beyond its VOT2014 predecessor are: (i) a new VOT2015 dataset twice as large as in VOT2014 with full annotation of targets by rotated bounding boxes and per-frame attribute, (ii) extensions of the VOT2014 evaluation methodology by introduction of a new performance measure. The dataset, the evaluation kit as well as the results are publicly available at the challenge website(1).
|
|
| 2. |
|
|
| 3. |
- Li, Weihua, et al.
(författare)
-
Controllable and large-scale synthesis of carbon quantum dots for efficient solid-state optical devices
- 2024
-
Ingår i: Nano Energy. - : Elsevier Ltd. - 2211-2855 .- 2211-3282. ; 122
-
Tidskriftsartikel (refereegranskat)abstract
- Carbon quantum dots (C-dots) showed excellent structure-tunable optical properties, mainly composed of carbon, nitrogen and oxygen. They have been used for various types of solid-state optical devices. Due to the photoluminescence quenching caused by aggregation, it is a challenge to produce high quantum yield and large Stokes shift C-dots via controllable and simple approaches. In this work, we demonstrated a microwave assisted heating approach for the high-quality C-dots production with ten grams scale per batch in less than 4 min. The addition of metal cation promoted the formation of the foam-structure by forming carboxyl-metal-amine complex, enabling the spatial confined growth of the C-dots in a solid-state, contributing to the high quantum yield (QY) of 73% with a Stokes shift of 0.65 eV. By tuning the structure of the C-dots, excitation dependent and independent photoluminescent (PL) behavior were achieved because of the formation of the different types of energy states evidenced by transient PL and femtosecond transient absorption spectroscopy. These optical properties enable the C-dots to be successfully integrated in luminescent solar concentrators (LSCs), having an external optical efficiency of 3.0% and a power conversion efficiency of 1.3% (225 cm2) and an excitation-dependent high-level anticounterfeiting fluorescent code, showing a great potential for solid-state optical system.
|
|
| 4. |
- Wang, Qiang, et al.
(författare)
-
Solidified Structure Control of Metallic Materials by Static High Magnetic Fields
- 2010
-
Ingår i: ISIJ International. - : Iron and Steel Institute of Japan. - 0915-1559 .- 1347-5460. ; 50:12, s. 1941-1946
-
Forskningsöversikt (refereegranskat)abstract
- Recently the studies on the effects of high magnetic fields on solidification processes have been paid much attention both from the fundamental and applied points of view With the aid of the enhanced Lorentz force and magnetization effect caused by the remarkably increased magnetic field intensity several interesting phenomena such as the control of fluid flow and particle migration in a melt crystal orientation and phase alignment have been obtained Moreover the magnetic force induced by the interaction of magnetization and high magnetic field gradient has been evidenced to show significant effects on the microstructure evolution of alloys In this paper the recent development of the control of the solidification process by high magnetic fields is reviewed from the view point of uniform magnetic fields and magnetic field gradients
|
|
| 5. |
- Wang, Yong, et al.
(författare)
-
Effect of Manufacturing Conditions and Al Addition on Inclusion Characteristics in Co-Based Dual-Phase High Entropy Alloy
- 2023
-
Ingår i: Metallurgical and Materials Transactions. A. - : Springer Nature. - 1073-5623 .- 1543-1940. ; 54:7, s. 2715-2729
-
Tidskriftsartikel (refereegranskat)abstract
- Three Co-based dual-phase high-entropy alloys (HEAs) were produced by different manufacturing conditions: arc-melting with Ar protection (Ar-HEA), vacuum induction melting in Al2O3 crucible (Cr-HEA) and vacuum induction melting with 0.5 at. pct Al (Al-HEA), which resulted in different levels of impurity elements and inclusion characteristics. The inclusions that precipitated in different HEA samples were investigated through an electrolytic extraction process and scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) characterization. The results showed that Mn(S,Se) inclusions were presented in all three alloys. MnCr2O4 inclusions were presented only in Ar-HEA, pure Al2O3 inclusions were presented in Cr-HEA and Al-HEA, and Mn–Cr–Al–O inclusions were also found in Al-HEA. Thermodynamic calculation software FactSage and Thermo-calc were used to predict the inclusion formations of the HEAs, which showed a good agreement with the experimental findings. The stable inclusions can transform from MnCr2O4 to Mn(Cr,Al)2O4 and then to pure Al2O3 with the increase of Al content. The inclusions in Al-containing HEA are spinel or Al2O3 depending on the content levels of Al and O. It is proposed that the formation of spinel and Al2O3 inclusions can be avoided in liquid HEA when the O content is controlled to be very low, which can result in smaller-sized inclusions. Moreover, the calculated coagulation coefficient of spinel inclusions is close but lower than that of Al2O3 inclusions. The collision growth of inclusions was affected by a combination of physical parameters of HEA and inclusions as well as the inclusion size and amount. Graphical Abstract: [Figure not available: see fulltext.]
|
|
| 6. |
- Zhang, Lixiu, et al.
(författare)
-
Advances in the Application of Perovskite Materials
- 2023
-
Ingår i: NANO-MICRO LETTERS. - : SHANGHAI JIAO TONG UNIV PRESS. - 2311-6706. ; 15:1
-
Forskningsöversikt (refereegranskat)abstract
- Nowadays, the soar of photovoltaic performance of perovskite solar cells has set off a fever in the study of metal halide perovskite materials. The excellent optoelectronic properties and defect tolerance feature allow metal halide perovskite to be employed in a wide variety of applications. This article provides a holistic review over the current progress and future prospects of metal halide perovskite materials in representative promising applications, including traditional optoelectronic devices (solar cells, light-emitting diodes, photodetectors, lasers), and cutting-edge technologies in terms of neuromorphic devices (artificial synapses and memristors) and pressure-induced emission. This review highlights the fundamentals, the current progress and the remaining challenges for each application, aiming to provide a comprehensive overview of the development status and a navigation of future research for metal halide perovskite materials and devices.
|
|
| 7. |
- Su, Wenyan, et al.
(författare)
-
13.4 % Efficiency from All-Small-Molecule Organic Solar Cells Based on a Crystalline Donor with Chlorine and Trialkylsilyl Substitutions
- 2021
-
Ingår i: ChemSusChem. - : Wiley. - 1864-5631 .- 1864-564X. ; 14:17, s. 3535-3543
-
Tidskriftsartikel (refereegranskat)abstract
- How to simultaneously achieve both high open-circuit voltage (Voc) and high short-circuit current density (Jsc) is a big challenge for realising high power conversion efficiency (PCE) in all-small-molecule organic solar cells (all-SM OSCs). Herein, a novel small molecule (SM)-donor, namely FYSM−SiCl, with trialkylsilyl and chlorine substitutions was designed and synthesized. Compared to the original SM-donor FYSM−H, FYSM−Si with trialkylsilyl substitution showed a decreased crystallinity and lower highest occupied molecular orbital (HOMO) level, while FYSM−SiCl had an improved crystallinity, more ordered packing arrangement, significantly lower HOMO level, and predominant “face-on” orientation. Matched with a SM-acceptor Y6, the FYSM−SiCl-based all-SM OSCs exhibited both high Voc of 0.85 V and high Jsc of 23.7 mA cm−2, which is rare for all-SM OSCs and could be attributed to the low HOMO level of FYSM−SiCl donor and the delicate balance between high crystallinity and suitable blend morphology. As a result, FYSM−SiCl achieved a high PCE of 13.4 % in all-SM OSCs, which was much higher than those of the FYSM−H- (10.9 %) and FYSM−Si-based devices (12.2 %). This work demonstrated a promising method for the design of efficient SM-donors by a side-chain engineering strategy via the introduction of trialkylsilyl and chlorine substitutions.
|
|
| 8. |
- Dang, D. F., et al.
(författare)
-
Manipulating backbone structure with various conjugated spacers to enhance photovoltaic performance of D-A-type two-dimensional copolymerse
- 2014
-
Ingår i: Organic Electronics: physics, materials, applications. - : Elsevier BV. - 1566-1199. ; 15:11, s. 2876-2884
-
Tidskriftsartikel (refereegranskat)abstract
- A class of low band-gap two-dimensional conjugated polymers of PBDTT-FQ PBDTT-TQ PBDTT-BTQ and PBDTT-TTQ was designed and synthesized, which contains the same di(alkylthiophene)-substituted benzo[1,2-b:4,5-b']dithiophene (BDTT) and 6,7-difluoro-quinoxaline (Q) units, as well as various conjugated spacers of furan, thiophene, bithiophene and thieno[3,2-b]thiophene in the main chain. Significant effect of the varied spacers between the BDTT and Q units on the thermal, optical, electrochemical and photovoltaic properties was investigated and observed for these two-dimensional copolymers in the polymer solar cells. The maximum power conversion efficiency of 5.9% with a short circuit current of 13.7 mA/cm(2) and a fill factor of 0.56 was obtained for the PBDTT-TQ with thiophene spacer in the bulk hetero-junction PSCs using [6,6]-phenyl-C-71-butyric acid methyl ester as acceptor.
|
|
| 9. |
- Leng, Jiewu, et al.
(författare)
-
Industry 5.0 : Prospect and retrospect
- 2022
-
Ingår i: Journal of manufacturing systems. - : Elsevier BV. - 0278-6125 .- 1878-6642. ; 65, s. 279-295
-
Tidskriftsartikel (refereegranskat)abstract
- Industry 5.0 blows the whistle on global industrial transformation. It aims to place humans' well-being at the center of manufacturing systems, thereby achieving social goals beyond employment and growth to provide prosperity robustly for the sustainable development of all humanity. However, the current exploration of Industry 5.0 is still in its infancy where research findings are relatively scarce and little systematic. This paper first reviews the evolutionary vein of Industry 5.0 and three leading characteristics of Industry 5.0: human-centricity, sustainability, and resiliency. The connotation system of Industry 5.0 is discussed, and its diversified essence is analyzed. Then, this paper constructs a tri-dimension system architecture for implementing Industry 5.0, namely, the technical dimension, reality dimension, and application dimension. The paper further discusses key enablers, the future implementation path, potential applications, and challenges of realistic scenarios of Industry 5.0. Finally, the limitations of the current research are discussed with potential future research directions highlighted. It is expected that this review work will arouse lively discussions and debates, and bring together the strengths of all beings for building a comprehensive system of Industry 5.0.
|
|
| 10. |
- Leng, Jiewu, et al.
(författare)
-
Unlocking the power of industrial artificial intelligence towards Industry 5.0: Insights, pathways, and challenges
- 2024
-
Ingår i: Journal of manufacturing systems. - : Elsevier BV. - 0278-6125 .- 1878-6642. ; 73, s. 349-363
-
Forskningsöversikt (refereegranskat)abstract
- With the continuous development of human-centric, resilient, and sustainable manufacturing towards Industry 5.0, Artificial Intelligence (AI) has gradually unveiled new opportunities for additional functionalities, new features, and tendencies in the industrial landscape. On the other hand, the technology-driven Industry 4.0 paradigm is still in full swing. However, there exist many unreasonable designs, configurations, and implementations of Industrial Artificial Intelligence (IndAI) in practice before achieving either Industry 4.0 or Industry 5.0 vision, and a significant gap between the individualized requirement and actual implementation result still exists. To provide insights for designing appropriate models and algorithms in the upgrading process of the industry, this perspective article classifies IndAI by rating the intelligence levels and presents four principles of implementing IndAI. Three significant opportunities of IndAI, namely, collaborative intelligence, self-learning intelligence, and crowd intelligence, towards Industry 5.0 vision are identified to promote the transition from a technology-driven initiative in Industry 4.0 to the coexistence and interplay of Industry 4.0 and a value-oriented proposition in Industry 5.0. Then, pathways for implementing IndAI towards Industry 5.0 together with key empowering techniques are discussed. Social barriers, technology challenges, and future research directions of IndAI are concluded, respectively. We believe that our effort can lay a foundation for unlocking the power of IndAI in futuristic Industry 5.0 research and engineering practice.
|
|
