SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Wennerberg Ann 1955 ) ;lar1:(cth);hsvcat:3"

Sökning: WFRF:(Wennerberg Ann 1955 ) > Chalmers tekniska högskola > Medicin och hälsovetenskap

  • Resultat 1-10 av 16
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Sul, Young-Taeg, 1960, et al. (författare)
  • Characteristics of the surface oxides on turned and electrochemically oxidized pure titanium implants up to dielectric breakdown: the oxide thickness, micropore configurations, surface roughness, crystal structure and chemical composition.
  • 2002
  • Ingår i: Biomaterials. - 0142-9612 .- 1878-5905. ; 23:2, s. 491-501
  • Tidskriftsartikel (refereegranskat)abstract
    • Titanium implants have been used widely and successfully for various types of bone-anchored reconstructions. It is believed that properties of oxide films covering titanium implant surfaces are of crucial importance for a successful osseointegration, in particular at compromized bone sites. The aim of the present study is to investigate the surface properties of anodic oxides formed on commercially pure (c.p.) titanium screw implants as well as to study 'native' oxides on turned c.p. titanium implants. Anodic oxides were prepared by galvanostatic mode in CH3COOH up to the high forming voltage of dielectric breakdown and spark formation. The oxide thicknesses, measured with Auger electron spectroscopy (AES), were in the range of about 200-1000 nm. Barrier and porous structures dominated the surface morphology of the anodic film. Quantitative morphometric analyses of the micropore structures were performed using an image analysis system on scanning electron microscopy (SEM) negatives. The pore sizes were
  •  
2.
  • Wennerberg, Ann, 1955, et al. (författare)
  • Titanium release from implants prepared with different surface roughness
  • 2004
  • Ingår i: Clin Oral Implants Res. ; 15:5, s. 505-12
  • Tidskriftsartikel (refereegranskat)abstract
    • OBJECTIVES: There may be a risk of greater ion release for surface-enlarged implants than conventionally turned components. The major aim of the present paper was to investigate whether a correlation exists between ion release and a surface roughness relevant for today's commercial implants. Other aims were to compare ion release after two insertion times and concentration in bone tissue as a function of distance from the implant surface. MATERIAL AND METHODS: Lactic acid aqueous solution (pH=2.3) and phosphate-buffered saline were used for the in vitro investigation. For the in vivo investigation, synchrotron radiation X-ray fluorescence (SRXRF) spectroscopy and secondary ion mass spectroscopy (SIMS) were performed 12 weeks and 1 year after implantation in rabbit tibiae. RESULTS: The average height deviation (S(a)) was 0.7, 1.27, 1.43 and 2.21 microm, respectively, for the four surfaces investigated. No difference in ion release was found in vitro. In vivo, SRXRF demonstrated slightly higher values for the roughest surface up to a distance of 400 microm from the implant surface; thereafter no difference was found. SIMS demonstrated no difference in ion release for the roughest and smoothest surfaces, but slightly more titanium in bone tissue after 1 year than after 12 weeks. Titanium rapidly decreased with distance from the implant surface. CONCLUSION: At a level relevant for commercial oral implants, no correlation was found between increasing roughness and ion release, neither in vitro nor in vivo.
  •  
3.
  • Rosén, Bengt Göran, et al. (författare)
  • Topographical characterisation of artificial femoral heads : a Benchmarking study
  • 2004
  • Ingår i: Wear. - : Elsevier. - 0043-1648 .- 1873-2577. ; 257:12, s. 1275-1280
  • Tidskriftsartikel (refereegranskat)abstract
    • The main functional demands on artificial joints are that they last more than 20 years. This means optimising the friction coefficient to minimise forces transmitted to the surrounding bone and the wear of the contacting surfaces. Surface roughness has an important influence on friction and wear. Traditionally, the 2D Ra-parameter has been the preferred way to characterise the joint's topography. Today ongoing development of 3D techniques are available for the research, and the aim of the present paper is to highlight the importance and possibilities using high-resolution 3D atomic force microscope ( AFM) and the optical phase-shifting interferometer for texture characterisation of eight commercially available femoral heads. The results show a significant variation of topography and surface-lay for the different femoral heads in the study. The variation and difference between heads were further underlined by the use of different characterisation techniques and measuring strategy. Results highlight the importance of the selection of measurement strategy, parameters, instrumentation, and scale of measurement in order properly to characterise the femoral heads in this study.
  •  
4.
  • Alenezi, Ali, et al. (författare)
  • Osseointegration effects of local release of strontium ranelate from implant surfaces in rats
  • 2019
  • Ingår i: Journal of Materials Science: Materials in Medicine. - : Springer Science and Business Media LLC. - 0957-4530 .- 1573-4838. ; 30:10, s. 116-
  • Tidskriftsartikel (refereegranskat)abstract
    • BACKGROUND : Numerous studies have reported the beneficial effects of strontium on bone growth, particularly by stimulating osteoblast proliferation and differentiation. Thus, strontium release around implants has been suggested as one possible strategy to enhance implant osseointegration. AIM : This study aimed to evaluate whether the local release of strontium ranelate (Sr-ranelate) from implants coated with mesoporous titania could improve bone formation around implants in an animal model. MATERIALS AND METHODS : Mesoporous titania (MT) thin coatings were formed utilizing the evaporation induced self-assembly (EISA) method using Pluronic (P123) with or without the addition of poly propylene glycol (PPG) to create materials with two different pore sizes. The MT was deposited on disks and mini-screws, both made of cp Ti grade IV. Scanning electron microscopy (SEM) was performed to characterize the MT using a Leo Ultra55 FEG instrument (Zeiss, Oberkochen, Germany). The MT was loaded with Sr-ranelate using soaking and the drug uptake and release kinetics to and from the surfaces were evaluated using quartz crystal microbalance with dissipation monitoring (QCM-D) utilizing a Q-sense E4 instrument. For the in vivo experiment, 24 adult rats were analyzed at two time points of implant healing (2 and 6 weeks). Titanium implants shaped as mini screws were coated with MT films and divided into two groups; supplied with Sr-ranelate (test group) and without Sr-ranelate (control group). Four implants (both test and control) were inserted in the tibia of each rat. The in vivo study was evaluated using histomorphometric analyses of the implant/bone interphase using optical microscopy. RESULTS : SEM images showed the successful formation of evenly distributed MT films covering the entire surface with pore sizes of 6 and 7.2 nm, respectively. The QCM-D analysis revealed an absorption of 3300 ng/cm2 of Sr-ranelate on the 7.2 nm MT, which was about 3 times more than the observed amount on the 6 nm MT (1200 ng/cm2). Both groups showed sustained release of Sr-ranelate from MT coated disks. The histomorphometric analysis revealed no significant differences in bone implant contact (BIC) and bone area (BA) between the implants with Sr-ranelate and implants in the control groups after 2 and 6 weeks of healing (BIC with a p-value of 0.43 after 2 weeks and 0.172 after 6 weeks; BA with a p-value of 0.503 after 2 weeks, and 0.088 after 6 weeks). The mean BIC and BA values within the same group showed significant increase among all groups between 2 and 6 weeks. CONCLUSION : This study could not confirm any positive effects of Sr-ranelate on implant osseointegration.
  •  
5.
  • Svanborg, Lory Melin, et al. (författare)
  • The effect of hydroxyapatite nanocrystals on early bone formation surrounding dental implants.
  • 2011
  • Ingår i: International journal of oral and maxillofacial surgery. - : Elsevier BV. - 1399-0020 .- 0901-5027. ; 40:3, s. 308-15
  • Tidskriftsartikel (refereegranskat)abstract
    • The knowledge of how nanostructures might affect early bone healing and osseointegration is limited. The aim of this study was to investigate if nanometer thick coatings of hydroxyapatite nanocrystals applied on a moderately rough surface might enhance early bone healing on screw-shaped dental implants and to evaluate if the thickness of the coat influences healing. Sandblasted and acid etched titanium implants coated with two different thicknesses of hydroxyapatite (test implants) and sandblasted and acid etched titanium implants (control implants), were inserted in rabbit tibia. After a healing time of 2, 4 and 9 weeks, a removal torque analysis and a histological evaluation were performed. The results from the removal torque analysis showed a tendency for higher values for the double coated hydroxyapatite after 4 weeks and for both the coated surfaces after 9 weeks of healing. The histological evaluations indicated slightly more new bone formation with the coated implants compared with the control; the differences did not reach statistical significance. The present study could not support the importance of nanometer thick coatings of hydroxyapatite nanocrystals in early bone healing, at least not when applied on a blasted and etched surface and placed in a cortical bone.
  •  
6.
  • Arvidsson, Anna, 1973, et al. (författare)
  • Formation of calcium phosphates on titanium implants with four different bioactive surface preparations. An in vitro study
  • 2007
  • Ingår i: Journal of Materials Science-Materials in Medicine. - : Springer Science and Business Media LLC. - 0957-4530 .- 1573-4838. ; 18:10, s. 1945-1954
  • Tidskriftsartikel (refereegranskat)abstract
    • The aim of the present study was to compare the nucleating and growing behaviour on four types of bioactive surfaces by using the simulated body fluid (SBF) model. Titanium discs were blasted and then prepared by alkali and heat treatment, anodic oxidation, fluoridation, or hydroxyapatite coating. The discs were immersed in SBF for 1, 2, 4 and 6 weeks. Calcium phosphates were found on all specimens, as analysed with scanning electron microscopy/energy dispersive X-ray analysis (SEM/EDX). After 1 and 2 weeks of SBF immersion more titanium was accessible with SEM/EDX on the blasted surfaces than the four bioactive surface types, indicating a difference in coverage by calcium phosphates. The Ca/P mean ratio of the surfaces was approximately 1.5 after 1 week, in contrast to the fluoridated specimens which displayed a Ca/P mean ratio of approximately 2. Powder X-ray diffraction (P-XRD) analyses showed the presence of hydroxyapatite on all types of surfaces after 4 and 6 weeks of immersion. The samples immersed for 6 weeks showed a higher degree of crystallinity than the samples immersed for 4 weeks. In conclusion, differences appeared at the early SBF immersion times of 1 and 2 weeks between controls and bioactive surface types, as well as between different bioactive surface types.
  •  
7.
  • Franke Stenport, Victoria, 1970, et al. (författare)
  • Precipitation of calcium phosphate in the presence of albumin on titanium implants with four different possibly bioactive surface preparations. An in vitro study
  • 2008
  • Ingår i: Journal of Materials Science: Materials in Medicine. - : Springer Science and Business Media LLC. - 0957-4530 .- 1573-4838. ; 19:12, s. 3497-3505
  • Tidskriftsartikel (refereegranskat)abstract
    • The aim of the present study was to compare the nucleating behaviour on four types of bioactive surfaces by using the simulated body fluid (SBF) model with the presence albumin. Titanium discs were blasted (B) and then prepared by alkali and heat treatment (AH), anodic oxidation (AO), fluoridation (F), or hydroxyapatite coating (HA). The discs were immersed in SBF with 4.5 mg/ml albumin for 3 days, 1, 2, 3 and 4 weeks and analysed with scanning electron microscopy/energy dispersive X-ray analysis (SEM/EDX) and X-ray photoelectron spectroscopy (XPS). Topographic surface characterisation was performed with a contact stylus profilometer. The results demonstrated that the bioactive surfaces initiated an enhanced calcium phosphate (CaP) formation and a more rapid increase of protein content was present on the bioactive surfaces compared to the blasted control surface. The observation was present on all bioactive surfaces. The fact that there was a difference between the bioactive surfaces and the blasted control surface with respect to precipitation of CaP and protein content on the surfaces support the fact that there may be biochemical advantages in vivo by using a bioactive surface.
  •  
8.
  • Gotfredsen, Klaus, et al. (författare)
  • Implants and/or teeth: consensus statements and recommendations.
  • 2008
  • Ingår i: Journal of oral rehabilitation. - : Wiley. - 1365-2842 .- 0305-182X. ; 35:Suppl 1, s. 2-8
  • Forskningsöversikt (refereegranskat)abstract
    • In August 23-25, 2007, the Scandinavian Society for Prosthetic Dentistry in collaboration with the Danish Society of Oral Implantology arranged a consensus conference on the topic 'Implants and/or teeth'. It was preceded by a workshop in which eight focused questions were raised and answered in eight review articles using a systematic approach. Twenty-eight academicians and clinicians discussed the eight review papers with the purpose to reach consensus on questions relevant for the topic. At the conference the consensus statements were presented as well as lectures based on the review articles. In this article the methods used at the consensus workshop are briefly described followed by the statements with comments.
  •  
9.
  • Göransson, Anna, 1970, et al. (författare)
  • An in vitro comparison of possibly bioactive titanium implant surfaces.
  • 2009
  • Ingår i: Journal of Biomedical Materials Research Part A. - : Wiley. - 1552-4965 .- 1549-3296. ; 88:4, s. 1037-1047
  • Tidskriftsartikel (refereegranskat)abstract
    • The aim of the study was to compare Ca and P formation (CaP) and subsequent bone cell response of a blasted and four different possibly bioactive commercially pure (cp) titanium surfaces; 1. Fluoride etched (Fluoride), 2. Alkali-heat treated (AH), 3. Magnesium ion incorporated anodized (TiMgO), and 4. Nano HA coated and heat treated (nano HA) in vitro. Furthermore, to evaluate the significance of the SBF formed CaP coat on bone cell response. The surfaces were characterized by Optical Interferometry, Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS). CaP formation was evaluated after 12, 24 and 72 h in simulated body fluid (SBF). Primary human mandibular osteoblast-like cells were cultured on the various surfaces subjected to SBF for 72 h. Cellular attachment, differentiation (osteocalcin) and protein production (TGF-beta(1)) was evaluated after 3 h and 10 days respectively. Despite different morphological appearances, the roughness of the differently modified surfaces was similar. The possibly bioactive surfaces gave rise to an earlier CaP formation than the blasted surface, however, after 72 h the blasted surface demonstrated increased CaP formation compared to the possibly bioactive surfaces. Subsequent bone cell attachment was correlated to neither surface roughness nor the amount of formed CaP after SBF treatment. In contrast, osteocalcin and TGF-beta(1) production were largely correlated to the amount of CaP formed on the surfaces. However, bone response (cell attachment, osteocalcin and TGF-F production) on the blasted controls were similar or increased compared to the SBF treated fluoridated, AH and TiMgO surface. (c) 2008 Wiley Periodicals, Inc. J Biomed Mater Res, 2008.
  •  
10.
  • Jimbo, Ryo, 1979, et al. (författare)
  • Histological and three-dimensional evaluation of osseointegration to nanostructured calcium phosphate-coated implants.
  • 2011
  • Ingår i: Acta biomaterialia. - : Elsevier BV. - 1878-7568 .- 1742-7061.
  • Tidskriftsartikel (refereegranskat)abstract
    • Nanostructures on implant surfaces have been shown to enhance osseointegration; however, commonly used evaluation techniques are probably not sufficiently sensitive to fully determine the effects of this process. This study aimed to observe the osseointegration properties of nanostructured calcium phosphate (CaP)-coated implants, by using a combination of three-dimensional imaging and conventional histology. Titanium implants were coated with stable CaP nanoparticles using an immersion technique followed by heat treatment. Uncoated implants were used as the control. After topographical and chemical characterizations, implants were inserted into the rabbit femur. After 2 and 4weeks, the samples were retrieved for micro-computed tomography and histomorphometric evaluation. Scanning electron microscopy evaluation indicated that the implant surface was modified at the nanoscale by CaP to obtain surface textured with rod-shaped structures. Relative to the control, the bone-to-implant contact for the CaP-coated implant was significantly higher at 4weeks after the implant surgery. Further, corresponding 3-D images showed active bone formation surrounding the implant. 3-D quantification and 2-D histology demonstrated statistical correlation; moreover, 3-D quantification indicated a statistical decrease in bone density in the non-coated control implant group between 2 and 4weeks after the surgery. The application of 3-D evaluation further clarified the temporal characteristics and biological reaction of implants in bone.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-10 av 16
Typ av publikation
tidskriftsartikel (15)
forskningsöversikt (1)
Typ av innehåll
refereegranskat (16)
Författare/redaktör
Wennerberg, Ann, 195 ... (16)
Andersson, Martin, 1 ... (9)
Kjellin, Per, 1972 (8)
Albrektsson, Tomas, ... (6)
Franke Stenport, Vic ... (5)
Meirelles, Luiz, 197 ... (5)
visa fler...
Arvidsson, Anna, 197 ... (5)
Currie, Fredrik, 197 ... (5)
Sul, Young-Taeg, 196 ... (4)
Johansson, Carina B. ... (2)
Jimbo, Ryo, 1979 (2)
Andersson, Martin (1)
Galli, Silvia (1)
Martinelli, Anna, 19 ... (1)
Petronis, Sarunas, 1 ... (1)
Nilner, Krister (1)
Molin, M (1)
Skarnemark, Gunnar, ... (1)
Holm, B. (1)
Berge, Maria, 1979- (1)
Jacobsson, C. M. (1)
Alenezi, Ali (1)
Atefyekta, Saba, 198 ... (1)
Allard, Stefan, 1968 (1)
Coelho, Paulo G. (1)
Rosén, Bengt-Göran (1)
Rosén, Stefan (1)
Mustafa, K. (1)
Currie, Fredrik (1)
Carlsson, Gunnar E, ... (1)
Gotfredsen, Klaus (1)
Hoffman, Maria, 1964 (1)
Tomasi, Cristiano, 1 ... (1)
Södervall, Ulf, 1954 (1)
Bergendal, B. (1)
Bergendal, T (1)
Karlsson, Stig, 1944 (1)
Vandeweghe, Stefan (1)
Hayashi, Mariko (1)
Schwartz-Filho, Humb ... (1)
Ono, Daisuke (1)
Currie, F (1)
Jeong, Yongsoo (1)
Jokstad, Asbjørn (1)
Peltola, Timo (1)
Sawase, Takashi (1)
Lang, N. P. (1)
Krozer, A (1)
Arvidson Fyrberg, K. (1)
Ellingsen, J-E (1)
visa färre...
Lärosäte
Göteborgs universitet (16)
Malmö universitet (10)
Umeå universitet (1)
Högskolan i Halmstad (1)
Språk
Engelska (16)
Forskningsämne (UKÄ/SCB)
Teknik (5)

År

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy