| 1. |
- Sul, Young-Taeg, 1960, et al.
(författare)
-
Optimum surface properties of oxidized implants for reinforcement of osseointegration: surface chemistry, oxide thickness, porosity, roughness, and crystal structure
- 2005
-
Ingår i: International Journal of Oral & Maxillofacial Implants. - Chicago, Ill. : Quintessence Pub. Co.. - 0882-2786 .- 1942-4434. ; 20:3, s. 349-59
-
Tidskriftsartikel (refereegranskat)abstract
- PURPOSE: To investigate detailed surface characterization of oxidized implants in a newly invented electrolyte system and to determine optimal surface oxide properties to enhance the bone response in rabbits. MATERIALS AND METHODS: A total of 100 screw-type titanium implants were prepared and divided into 1 control group (machine-turned implants) and 4 test groups (magnesium ion-incorporated oxidized implants). Forty implants were used for surface analyses. A total of 60 implants, 12 implants from each group, were placed in the tibiae of 10 New Zealand white rabbits and measured with a removal torque test after a healing period of 6 weeks. RESULTS: For the test groups, the oxide thicknesses ranged from about 1,000 to 5,800 nm; for the control group, mean oxide thickness was about 17 nm. The surface morphology showed porous structures for test groups and nonporous barrier film for the control group. Pore diameter ranged from < or = 0.5 microm to < or = 3.0 microm. In regard to surface roughness, arithmetic average height deviation (Sa) values varied from 0.68 to 0.98 microm for test implants and 0.55 microm for control implants; developed surface ratio (Sdr) values ranged from 10.6% to 46% for the test groups and were about 10.6% for the control group. A mixture of anatase and rutile-type crystals were observed in the test groups; amorphous-type crystals were observed in the control group. After a healing period of 6 weeks, removal torque measurements in all 4 test groups demonstrated significantly greater implant integration as compared to machine-turned control implants (P < or = .033). DISCUSSION: Determinant oxide properties of oxidized implants are discussed in association with bone responses. Of all surface properties, RTVs were linearly increased as relative atomic concentrations of magnesium ion increase. CONCLUSIONS: Surface properties of the oxidized implants in the present study, especially surface chemistry, influenced bone responses. The surface chemistry of the optimal oxidized implant should be composed of approximately 9% magnesium at relative atomic concentration in titanium oxide matrix and have an oxide thickness of approximately 1,000 to 5,000 nm, a porosity of about 24%, and a surface roughness of about 0.8 microm in Sa and 27% to 46% in Sdr; its oxide crystal structure should be a mixture of anatase- and rutile-phase crystals.
|
|
| 2. |
|
|
| 3. |
- Albrektsson, Tomas, 1945, et al.
(författare)
-
Oral Implant Surfaces 1
- 2005
-
Ingår i: Perio & Implant Quarterly 2005. ; 1, s. 33-43
-
Tidskriftsartikel (refereegranskat)
|
|
| 4. |
- Albrektsson, Tomas, 1945, et al.
(författare)
-
Oral Implant Surfaces 11
- 2005
-
Ingår i: Perio & Implant Quarterly 2005. ; 2, s. 22-49
-
Tidskriftsartikel (refereegranskat)
|
|
| 5. |
- Albrektsson, Tomas, 1945, et al.
(författare)
-
State of the art of oral implants
- 2008
-
Ingår i: Peridontology 2000. - : Wiley. - 1600-0757 .- 0906-6713. ; 47:1, s. 15-26
-
Tidskriftsartikel (refereegranskat)
|
|
| 6. |
- Albrektsson, Tomas, 1945, et al.
(författare)
-
The impact of oral implants - past and future, 1966-2042
- 2005
-
Ingår i: J Can Dent Assoc. - 1488-2159. ; 71:5
-
Tidskriftsartikel (refereegranskat)abstract
- This paper traces the history of oral implants, beginning with their early undocumented use in the mid-1960s. Although early experimentation with the Branemark system of osseointegration was unsuccessful, significant improvements and scrupulous documentation of the 1970s led to their general acceptance. George Zarb spearheaded their introduction into North America and application of the osseointegration technique soon expanded to extraoral craniofacial prostheses and bone-anchored hearing aids.New possibilities, such as altered surface properties and the use of implants in grafted and irradiated bone are currently being explored, although commercial pressure to introduce new products before they are adequately tested is a cause for concern.The future will see bioactive surfaces and additives that stimulate bone growth. In fact, with the possibility of in vivo growth of new teeth, implants may become unnecessary.
|
|
| 7. |
- Meirelles, Luiz, 1974, et al.
(författare)
-
Bone reaction to nano hydroxyapatite modified titanium implants placed in a gap-healing model
- 2008
-
Ingår i: Journal Biomedical MAterials Research - A. - : Wiley. - 1549-3296 .- 1552-4965. ; 87:3, s. 624-631
-
Tidskriftsartikel (refereegranskat)abstract
- Nanohydroxyapatite materials show similar chemistry to the bone apatite and depending on the underlying topography and the method of preparation, the nanohydroxyapatite may simulate the specific arrangement of the crystals in bone. Hydroxyapatite (HA) and other CaP materials have been indicated in cases in which the optimal surgical fit is not achievable during surgery, and the HA surface properties may enhance bone filling of the defect area. In this study, very smooth electropolished titanium implants were used as substrata for nano-HA surface modification and as control. One of each implant (control and nano HA) was placed in the rabbit tibia in a surgical site 0.7 mm wider than the implant diameter, resulting in a gap of 0.35 mm on each implant side. Implant stability was ensured by a fixating plate fastened with two side screws. Topographical evaluation performed with an optical interferometer revealed the absence of microstructures on both implants and higher resolution evaluation with AFM showed similar nanoroughness parameters. Surface pores detected on the AFM measurements had similar diameter, depth, and surface porosity (%). Histological evaluation demonstrated similar bone formation for the nano HA and electropolished implants after 4 weeks of healing. These results do not support that nano-HA chemistry and nanotopography will enhance bone formation when placed in a gap-healing model. The very smooth surface may have prevented optimal activity of the material and future studies may evaluate the synergic effects of the surface chemistry, micro, and nanotopography, establishing the optimal parameters for each of them.
|
|
| 8. |
- Meirelles, Luiz, 1974, et al.
(författare)
-
Effect of hydroxyapatite and titania nanostructures on early in vivo bone response
- 2008
-
Ingår i: Clinical Implant Dentistry and Related Research. - : Wiley. - 1708-8208 .- 1523-0899. ; 10:4, s. 245-254
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: Hydroxyapatite or titania nano structures were applied on smooth titanium implant cylinders. The aim was to investigate whether nano HA may result in enhanced osseointegration compared to nano titania structures. Material and Methods: Surface topography evaluation included detailed characterization of nano size structures present at the implant surface combined with surface roughness parameters at the micro- and nano- meter level of resolution. Microstructures were removed from the surface to ensure that bone response observed was dependent only on the nanotopography and/or chemistry of the surface. Early in vivo bone response (4 weeks) evaluation was investigated in a rabbit model. Results: In the present study, nano titania coated implants showed an increased coverage area and feature density, forming a homogenous layer compared to nano HA implants. Bone response observed at 4 weeks could not be explained by the surface chemistry. New formed bone connected to the original cortical bone demonstrated an increase of 24% for the nano titania compared to the nano HA implant, although the difference was not statistically significant. Conclusion: Thus, no evidence of enhanced bone formation to nano hydroxyapatite modified implants was observed compared to nano titania modified implants. The presence of specific nano structures; dependent on the surface modification exhibiting different size and distribution did modulate in vivo bone response.
|
|
| 9. |
- Meirelles, Luiz, 1974, et al.
(författare)
-
Increased bone formation to unstable nano rough implants
- 2007
-
Ingår i: Clin Oral Implants Res. - : Wiley. - 0905-7161. ; 18:3
-
Tidskriftsartikel (refereegranskat)abstract
- Early bone response to cylindrical smooth titanium implants (S(a)=0.1 microm) inserted into the rabbit tibia was compared in a stable and nonstable regime. Surface roughness parameters were calculated from measurements obtained with optical interferometry and atomic force microscopy. Contrary to our hypothesis, the nonstable implant showed higher bone to metal contact and increased bone area in the endosteal region compared with the stable implant after 4 weeks of healing. Bone area measurements in the cortical region revealed similar values. Primitive woven bone was found in close contact with both implants, but significantly more with the nonstable implant. Finding more bone-to-implant contact (BIC) need not necessarily indicate that unstable implants were more strongly integrated. Primitive bone stage development observed indicates less strong implant anchorage than could be expected from BIC percentage alone. Stable implant design used in this study is a reliable model to evaluate submicron and nanostructures in vivo, as implant stability was achieved in the absence of microirregularaties.
|
|
| 10. |
- Meirelles, Luiz, 1974, et al.
(författare)
-
Nano hydroxyapatite structures influence early bone formation
- 2008
-
Ingår i: Journal Biomedical Materials Research - A. - : Wiley. - 1549-3296 .- 1552-4965. ; 87:2, s. 299-307
-
Tidskriftsartikel (refereegranskat)abstract
- In a study model that aims to evaluate the effect of nanotopography on bone formation, micrometer structures known to alter bone formation, should be removed. Electropolished titanium implants were prepared to obtain a surface topography in the absence of micro structures, thereafter the implants were divided in two groups. The test group was modified with nanosize hydroxyapatite particles; the other group was left uncoated and served as control for the experiment. Topographical evaluation demonstrated increased nanoroughness parameters for the nano-HA implant and higher surface porosity compared to the control implant. The detected features had increased size and diameter equivalent to the nano-HA crystals present in the solution and the relative frequency of the feature size and diameter was very similar. Furthermore, feature density per m2 showed a decrease of 13.5% on the nano-HA implant. Chemical characterization revealed calcium and phosphorous ions on the modified implants, whereas the control implants consisted of pure titanium oxide. Histological evaluation demonstrated significantly increased bone formation to the coated (p < 0.05) compared to uncoated implants after 4 weeks of healing. These findings indicate for the first time that early bone formation is dependent on the nanosize hydroxyapatite features, but we are unaware if we see an isolated effect of the chemistry or of the nanotopography or a combination of both.
|
|
