| 1. |
- Johansson, Pär, et al.
(författare)
-
Biomechanical, histological, and computed X-ray tomographic analyses of hydroxyapatite coated PEEK implants in an extended healing model in rabbit
- 2018
-
Ingår i: Journal of Biomedical Materials Research Part A. - : Wiley. - 1549-3296 .- 1552-4965. ; 106:5, s. 1440-1447
-
Tidskriftsartikel (refereegranskat)abstract
- A nanosized hydroxyapatite (HA) modification on polyetheretherketone (PEEK) using a novel spin coating technique was investigated in a rabbit model. Spin coating technique creates a 20-40 nm thick layer of nanosized HA particles with similar shape, size, and crystallinity as human bone. Some implants were designed with a perforating hole in the apical region to mimic a fusion chamber of a spinal implant. The coating nano-structures were assessed using a scanning electron microscope. The in vivo response to HA-PEEK was compared to untreated PEEK with respect to removal torque, histomorphometry, and computed microtomography. The HA-coated and pure PEEK implants were inserted in the tibia and femur bone according to simple randomization. The rabbits were sacrificed 20 weeks after implantation. Removal torque analysis showed significantly higher values for HA-PEEK. Qualitative histological evaluation revealed an intimate contact between PEEK and the bone at the threads and perforated hole. Histomorphometric assessment showed higher bone-implant and bone area values for HA-PEEK but without statistical significance. The effect of the HA coating showed most prominent effect in the removal torque which may be correlated to an alteration in the bone quality around the HA-PEEK implants. (c) 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1440-1447, 2018.
|
|
| 2. |
- Kjellin, P., et al.
(författare)
-
A nanosized zirconium phosphate coating for PEEK implants and its effect in vivo
- 2020
-
Ingår i: Materialia. - : Elsevier BV. - 2589-1529. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- Surface treatments and coatings can be applied to polyether ether ketone (PEEK) implants to improve their ability to osseointegrate. A new coating, consisting of amorphous nanosized zirconium phosphate (ZrP) was applied to PEEK and titanium substrates. The coating was applied by using a microemulsion as a carrier for the nanoparticles. It was found that the coating formed a thin continuous porous layer on top of the substrate, with pore diameters of 10–50 nm. The thickness of the coating was estimated to <100 nm. The resistance to acidic (pH = 4) conditions and exposure to ultrasonication was investigated with XPS, which showed no loss of coating. The adherence of the coating was investigated by insertion of implants in simulated bone material, which showed a minor loss in coating. In vitro (SBF) testing showed that the coating promoted crystallization of calcium phosphates, for uncoated PEEK, no crystallization was detected. The in vivo performance of the ZrP coating was examined by coating screw shaped PEEK implants which were implanted in rabbit tibia for 6 weeks. The anchoring strength of the implants was evaluated with removal torque (RTQ) measurements. The average RTQ for the ZrP coated implants was significantly higher compared to the non-coated implants. The results show that a nanosized ZrP coating on PEEK implants can transform the surface from having a low ability to osseointegrate to a surface which stimulates bone tissue growth. This makes the ZrP coating an interesting alternative for coating PEEK implants, such as spinal fusion cages and tendon fixation screws. © 2020
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Reinedahl, David, et al.
(författare)
-
Review of PEEK implants and biomechanical and immunological responses to a zirconium phosphate nano-coated PEEK, a blasted PEEK, and a turned titanium implant surface
- 2022
-
Ingår i: American journal of dentistry. - : Mosher & Linder, Inc.. - 0894-8275. ; 35:2, s. 152-160
-
Tidskriftsartikel (refereegranskat)abstract
- PURPOSE: To investigate the biomechanical and immunological reactions to coated and non-coated blasted PEEK implants in vivo after 12 weeks and review the associated literature. METHODS: Two osteotomy sites were performed in each proximal tibia of 10 lop-eared rabbits (n= 4 per rabbit). Each rabbit received a randomly placed (1) blasted zirconium phosphate nano-coated PEEK- (nano-ZrP), (2) blasted PEEK- (PEEK) and (3) titanium implant (Ti) and an empty sham site. At 12 weeks, removal torque of all implants and biological investigation with qPCR was performed. The implant surfaces were analyzed prior to insertion with interferometry, SEM and XPS. RESULTS: The interferometry analysis showed that there was no difference in roughness for the uncoated PEEK compared to the ZrP coated PEEK implants. The titanium implants were considerably smoother (Sa= 0.23 µm) than the uncoated Sa= 1.11 µm) and ZrP coated PEEK implants (Sa= 1.12 µm). SEM analysis on the PEEK implants corroborated the interferometry results; no difference in structure between the uncoated vs. the ZrP coated PEEK was visible on the micrometer level. At higher magnifications, the ZrP coating was visible in the SEM as a thin, porous network. All tested implants displayed osseointegration with the highest RTQ for nano-ZrP (18.4 Ncm) followed by PEEK (14.5 Ncm) and Ti (11.5 Ncm). All implants activated the immune system, with elevated macrophage and M2 macrophage qPCR markers at 12 weeks compared to the sham site. CLINICAL SIGNIFICANCE: Nano-ZrP coating improves osseointegration of blasted PEEK implants at 12 weeks of follow-up. Osseointegration of titanium, PEEK and nano-ZrP PEEK is not a normal bone healing process, but rather a shield-off mechanism that appears to be regulated by the innate immune system. Copyright©American Journal of Dentistry.
|
|
| 6. |
|
|
