| 1. |
- Chen, Genqiang, et al.
(författare)
-
Scale-up of production of bacterial nanocellulose using submerged cultivation
- 2018
-
Ingår i: Journal of chemical technology and biotechnology (1986). - : Wiley. - 0268-2575 .- 1097-4660. ; 93:12, s. 3418-3427
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: More extensive utilization of bacterial nanocellulose (BNC) is severely restricted by the low efficiency and small scale of the traditional static cultivation. Submerged fermentation in stirred-tank reactors (STRs) is potentially favourable for large-scale production of BNC, but scale-up of cultivation remains challenging. Even though the STR is most commonly used for submerged cultivation in the fermentation industry, there are few previous attempts to scale-up production of BNC to pilot scale using an STR. Furthermore, the question of how scale-up of submerged cultivation affects the properties of the BNC has received very little attention. RESULTS: Four strains were compared in 250-mL shake flasks. Strain DHU-ATCC-1 displayed the highest volumetric productivity, 0.56 g L−1 d−1, and was then cultivated in a 400-mL STR, showing a similar productivity of 0.55 g L−1 d−1. Scale-up using a 75-L STR pilot bioreactor resulted in enhancement of the BNC production rate from 0.056 g d−1 in the shake flasks to 17.3 g d−1 in the 75-L STR, although the productivity decreased to 0.43 g L−1 d−1. During scale-up from shake flasks to 400-mL STR and further on to 75-L STR, the BNC fibers formed more bundles, whereas the fiber diameter decreased from 25.6 to 21.7 nm. The BNC from the 75-L STR exhibited a higher degree of polymerization, specifically 3230, higher degree of crystallinity, specifically 83%, larger crystallites, and improved strength including higher tensile energy absorption index and superior stretch at break. CONCLUSION: It is possible to enhance BNC production, and maintain or improve its properties when scaling up submerged cultivation in STRs.
|
|
| 2. |
- Chen, Zhi‑Qiang, et al.
(författare)
-
Early selection for resistance to Heterobasidion parviporum in Norway spruce is not likely to adversely affect growth and wood quality traits in late-age performance
- 2018
-
Ingår i: European Journal of Forest Research. - : Springer Science and Business Media LLC. - 1612-4669 .- 1612-4677. ; 137:4, s. 517-525
-
Tidskriftsartikel (refereegranskat)abstract
- Infections with Heterobasidion parviporum devalue the Norway spruce timber as the decayed wood does not meet the necessary quality requirements for sawing. To evaluate the incorporation of disease resistance in the Norway spruce breeding strategy, an inoculation experiment with H. parviporum on 2-year-old progenies of 466 open-pollinated families was conducted under greenhouse (nursery) conditions. Lesion length in the phloem (LL), fungal growth in sapwood (FG) and growth (D) were measured on an average of 10 seedlings for each family. The genetic variation and genetic correlations between both LL, FG and growth in the nursery trial and wood quality traits measured previously from 21-year old trees in two progeny trials, including solid-wood quality traits (wood density, and modulus of elasticity) and fiber properties traits (radial fiber width, tangential fiber width, fiber wall thickness, fiber coarseness, microfibril angle and fiber length). For both LL and FG, large coefficients of phenotypic variation (> 26%) and genetic variation (> 46%) were detected. Heritabilities of LL and FG were 0.33 and 0.42, respectively. We found no significant correlations between wood quality traits and growth in the field progeny trials with neither LL nor FG in the nursery trial. Our data suggest that the genetic gains may reach 41 and 52% from mass selection by LL and FG, respectively. Early selection for resistance to H. parviporum based on assessments of fungal spread in the sapwood in nursery material, FG, will not adversely affect growth and wood quality traits in late-age performance.
|
|
| 3. |
- Chen, Zhi-Qiang, et al.
(författare)
-
Estimating solid wood properties using Pilodyn and acoustic velocity on standing trees of Norway spruce
- 2015
-
Ingår i: Annals of Forest Science. - : Springer Science and Business Media LLC. - 1286-4560 .- 1297-966X. ; 72:4, s. 499-508
-
Tidskriftsartikel (refereegranskat)abstract
- Key message: Strong genetic correlations were observed between Pilodyn measurement and wood density, and between acoustic velocity and MFA. Combination of Pilodyn penetration and acoustic velocity measurements from standing trees can provide reliable prediction of stiffness of Norway spruce for breeding selection.Context: Traditional methods for the estimation of solid wood quality traits of standing tree such as wood density, microfibril angle (MFA), and modulus of elasticity (MOE) are time-consuming and expensive, which render them unsuitable for rapidly screening a large number of trees in tree breeding programs.Aim: This study aims to evaluate the suitability of using Pilodyn penetration and acoustic velocity (nondestructive evaluation) to assess wood density, MFA, and MOE for Norway spruce.Methods: Pilodyn penetration and Hitman acoustic velocity, as well as wood density, MFA, and MOE using benchmark SilviScan were measured on 5618 standing trees of 524 open-pollinated families in two 21-year-old Norway spruce (Picea abies) progeny trials in southern Sweden.Results: Strong genetic correlations were observed between Pilodyn measurement and wood density (rg = −0.96), and between acoustic velocity and MFA (rg = −0.94). Combination of Pilodyn penetration and Hitman acoustic velocity measurements (Formula presented.) obtained from standing trees showed a genetic correlation with benchmark MOE of 0.99. This combined MOE(Formula presented.) had higher selection efficiency for benchmark MOE (92 %) compared to 58–60 % using acoustic velocity alone and 78 % using Pilodyn penetration alone.Conclusion: Combination of Pilodyn penetration with Hitman acoustic velocity provided very high selection efficiency for the three most important quality traits for wood mechanical properties in Norway spruce.
|
|
| 4. |
- Chen, Zhi-Qiang, et al.
(författare)
-
Genetic analysis of fiber dimensions and their correlation with stem diameter and solid-wood properties in Norway spruce
- 2016
-
Ingår i: Tree Genetics & Genomes. - : Springer Science and Business Media LLC. - 1614-2942 .- 1614-2950. ; 12:6
-
Tidskriftsartikel (refereegranskat)abstract
- Adverse genetic correlations between growth traits and solid-wood, as well as fiber traits are a concern in conifer breeding programs. To evaluate the impact of selection for growth and solid-wood properties on fiber dimensions, we investigated the inheritance and efficiency of early selection for different wood-fiber traits and their correlations with stem diameter, wood density, modulus of elasticity (MOE), and microfibril angle (MFA) in Norway spruce (Picea abies L). The study was based on two large open-pollinated progeny trials established in southern Sweden in 1990 with material from 524 families comprising 5618 trees. Two increment cores were sampled from each tree. Radial variations from pith to bark were determined for rings 3–15 with SilviScan for fiber widths in the radial (RFW) and tangential (TFW) direction, fiber wall thickness (FWT), and fiber coarseness (FC). Fiber length (FL) was determined for rings 8–11. Heritabilities based on rings 8–11 using joint-site data were moderate to high (0.24–0.51) for all fiber-dimension traits. Heritabilities based on stem cross-sectional averages varied from 0.34 to 0.48 and reached a plateau at rings 6–9. The “age-age†genetic correlations for RFW, TFW, FWT, and FC cross-sectional averages at a particular age with cross-sectional averages at ring 15 reached 0.9 at rings 4–7. Our results indicated a moderate to high positive genetic correlation for density and MOE with FC and FWT, moderate and negative with RFW, and low with TFW and FL. Comparison of several selection scenarios indicated that the highest profitability is reached when diameter and MOE are considered jointly, in which case, the effect on any fiber dimension is negligible. Early selection was highly efficient from ring 5 for RFW and from rings 8–10 for TFW, FWT, and FC.
|
|
| 5. |
- Hayatgheibi, Haleh, et al.
(författare)
-
Implications of accounting for marker-based population structure in the quantitative genetic evaluation of genetic parameters related to growth and wood properties in Norway spruce
- 2024
-
Ingår i: BMC Genomic Data. - : BioMed Central Ltd. - 2730-6844. ; 25:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Forest geneticists typically use provenances to account for population differences in their improvement schemes; however, the historical records of the imported materials might not be very precise or well-aligned with the genetic clusters derived from advanced molecular techniques. The main objective of this study was to assess the impact of marker-based population structure on genetic parameter estimates related to growth and wood properties and their trade-offs in Norway spruce, by either incorporating it as a fixed effect (model-A) or excluding it entirely from the analysis (model-B). Results: Our results indicate that models incorporating population structure significantly reduce estimates of additive genetic variance, resulting in substantial reduction of narrow-sense heritability. However, these models considerably improve prediction accuracies. This was particularly significant for growth and solid-wood properties, which showed to have the highest population genetic differentiation (QST) among the studied traits. Additionally, although the pattern of correlations remained similar across the models, their magnitude was slightly lower for models that included population structure as a fixed effect. This suggests that selection, consistently performed within populations, might be less affected by unfavourable genetic correlations compared to mass selection conducted without pedigree restrictions. Conclusion: We conclude that the results of models properly accounting for population structure are more accurate and less biased compared to those neglecting this effect. This might have practical implications for breeders and forest managers where, decisions based on imprecise selections can pose a high risk to economic efficiency.
|
|
| 6. |
- Baison, John, et al.
(författare)
-
Genome-Wide Association Study (GWAS) identified novel candidate loci affecting wood formation in Norway spruce
- 2019
-
Ingår i: The Plant Journal. - : Wiley. - 0960-7412 .- 1365-313X. ; 100:1, s. 83-100
-
Tidskriftsartikel (refereegranskat)abstract
- Norway spruce is a boreal forest tree species of significant ecological and economic importance. Hence there is a strong imperative to dissect the genetics underlying important wood quality traits in the species. We performed a functional Genome-Wide Association Study (GWAS) of 17 wood traits in Norway spruce using 178101 single-nucleotide polymorphisms (SNPs) generated from exome genotyping of 517 mother trees. The wood traits were defined using functional modelling of wood properties across annual growth rings.We applied a LASSO based association mapping method using a functional multi-locus mapping approach that utilizes latent traits, with a stability selection probability method as the hypothesis testing approach to determine significant Quantitative Trait Loci (QTLs). The analysis provided 52 significant SNPs from 39 candidate genes, including genes previously implicated in wood formation and tree growth in spruce and other species. Our study represents a multi-locus GWAS for complex wood traits in Norway spruce. The results advance our understanding of the genetics influencing wood traits and identifies candidate genes for future functional studies.
|
|
| 7. |
- Chen, Genqiang, et al.
(författare)
-
Bioconversion of waste fiber sludge to bacterial nanocellulose and use for reinforcement of CTMP paper sheets
- 2017
-
Ingår i: Polymers. - : MDPI AG. - 2073-4360. ; 9:9
-
Tidskriftsartikel (refereegranskat)abstract
- Utilization of bacterial nanocellulose (BNC) for large-scale applications is restricted by low productivity in static cultures and by the high cost of the medium. Fiber sludge, a waste stream from pulp and paper mills, was enzymatically hydrolyzed to sugar, which was used for the production of BNC by the submerged cultivation of Komagataeibacter xylinus. Compared with a synthetic glucose-based medium, the productivity of purified BNC from the fiber sludge hydrolysate using shake-flasks was enhanced from 0.11 to 0.17 g/(L × d), although the average viscometric degree of polymerization (DPv) decreased from 6760 to 6050. The cultivation conditions used in stirred-tank reactors (STRs), including the stirring speed, the airflow, and the pH, were also investigated. Using STRs, the BNC productivity in fiber-sludge medium was increased to 0.32 g/(L × d) and the DPv was increased to 6650. BNC produced from the fiber sludge hydrolysate was used as an additive in papermaking based on the chemithermomechanical pulp (CTMP) of birch. The introduction of BNC resulted in a significant enhancement of the mechanical strength of the paper sheets. With 10% (w/w) BNC in the CTMP/BNC mixture, the tear resistance was enhanced by 140%. SEM images showed that the BNC cross-linked and covered the surface of the CTMP fibers, resulting in enhanced mechanical strength.
|
|
| 8. |
- Chen, Zhiqiang, et al.
(författare)
-
Inheritance of growth and solid wood quality traits in a large Norway spruce population tested at two locations in southern Sweden
- 2014
-
Ingår i: Tree Genetics & Genomes. - : Springer Science and Business Media LLC. - 1614-2942 .- 1614-2950. ; 10:5, s. 1291-1303
-
Tidskriftsartikel (refereegranskat)abstract
- Unfavorable genetic correlations between growth and wood quality traits are one of the biggest challenges in advanced conifer breeding programs. To examine and deal with such correlation, increment cores were sampled at breast height from 5,618 trees in 524 open-pollinated families in two 21-year-old Norway spruce progeny trials in southern Sweden, and age trends of genetic variation, genetic correlation, and efficiency of selection were investigated. Wood quality traits were measured on 12-mm increment cores using SilviScan. Heritability was moderate (~0.4-0.5) for wood density and modulus of elasticity (MOE) but low (~0.2) for microfibril angle (MFA). Different age trends were observed for wood density, MFA, and MOE, and the lower heritability of MFA relative to wood density and MOE in Norway spruce contrasted with general trends of the three wood quality traits in pine. Genetic correlations among growth, wood density, MFA, and MOE increased to a considerably high value from pith to bark with unfavorable genetic correlations (−0.6 between growth and wood density, −0.74 between growth and MOE). Age-age genetic correlations reached 0.9 after ring 4 for diameter at breast height (DBH), wood density, MFA, and MOE traits. Early selections at ring 10 for diameter and at ring 6 or 7 for wood quality traits had similar effectiveness as selection conducted at reference ring 15. Selection based on diameter alone produced 19.0 % genetic gain in diameter but resulted in 4.8 % decrease in wood density, 9.4 % decrease in MOE, and 8.0 % increase in MFA. Index selection with a restriction of no change in wood density, MOE, and MFA, respectively, produced relatively lower genetic gains in diameter (16.4, 12.2, and 14.1 %, respectively), indicating such index selection could be implemented to maintain current wood density. Index selection using economic weights is, however, recommended for maximum economic efficiency
|
|
| 9. |
- Chen, Zhiqiang, et al.
(författare)
-
Method for accurate fiber length determination from increment cores for large-scale population analyses in Norway spruce
- 2016
-
Ingår i: Holzforschung. - : Walter de Gruyter GmbH. - 0018-3830 .- 1437-434X. ; 70:9, s. 829-838
-
Tidskriftsartikel (refereegranskat)abstract
- Fiber (tracheid) length is an important trait targeted for genetic and silvicultural improvement. Such studies require large-scale non-destructive sampling, and accurate length determination. The standard procedure for non-destructive sampling is to collect increment cores, singularize their cells by maceration, measure them with optical analyzer and apply various corrections to suppress influence of non-fiber particles and cut fibers, as fibers are cut by the corer. The recently developed expectation-maximization method (EM) not only addresses the problem of non-fibers and cut fibers, but also corrects for the sampling bias. Here, the performance of the EM method has been evaluated by comparing it with length-weighing and squared length-weighing, both implemented in fiber analyzers, and with microscopy data for intact fibers, corrected for sampling bias, as the reference. This was done for 12-mm increment cores from 16 Norway spruce (Picea abies (L.) Karst) trees on fibers from rings 8-11 (counted from pith), representing juvenile wood of interest in breeding programs. The EM-estimates provided mean-fiber-lengths with bias of only +2.7% and low scatter. Length-weighing and length2-weighing gave biases of-7.3% and +9.3%, respectively, and larger scatter. The suggested EM approach constitutes a more accurate non-destructive method for fiber length (FL) determination, expected to be applicable also to other conifers.
|
|
| 10. |
- Jiang, L., et al.
(författare)
-
Experimental investigation on BOF slag oxidation in air
- 2019
-
Ingår i: Ironmaking & steelmaking. - : Taylor and Francis Ltd.. - 0301-9233 .- 1743-2812. ; 46:8, s. 747-754
-
Tidskriftsartikel (refereegranskat)abstract
- Basic oxygen furnace (BOF) slag contains a significant amount of iron-containing species, which is considered to be iron resources and therefore need to be recovered. In this work, the oxidation behaviour of BOF slag under air (at selected oxidation temperatures and holding time) was investigated to explore the potential of transforming non-magnetic wustite in the BOF slag into magnetic spinel, which may subsequently be recovered by magnetic separation. The experimental results show that the iron-containing spices in the BOF slag can be oxidised into magnetic spinel phases in the investigated temperature range of 1000–1150°C and thereafter be recovered by magnetic separation. The formation of these phases is closely related to the oxidation temperatures and holding time: a higher oxidation temperature and longer holding time lead to a larger amount of formed magnetic species; however, the amount of formed magnetic species decreases at elevated temperature (>1050°C) and with extended holding time (>40 min).
|
|
