| 1. |
- Bentham, James, et al.
(författare)
-
A century of trends in adult human height
- 2016
-
Ingår i: eLIFE. - : eLife Sciences Publications Ltd. - 2050-084X. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- Being taller is associated with enhanced longevity, and higher education and earnings. We reanalysed 1472 population-based studies, with measurement of height on more than 18.6 million participants to estimate mean height for people born between 1896 and 1996 in 200 countries. The largest gain in adult height over the past century has occurred in South Korean women and Iranian men, who became 20.2 cm (95% credible interval 17.5–22.7) and 16.5 cm (13.3– 19.7) taller, respectively. In contrast, there was little change in adult height in some sub-Saharan African countries and in South Asia over the century of analysis. The tallest people over these 100 years are men born in the Netherlands in the last quarter of 20th century, whose average heights surpassed 182.5 cm, and the shortest were women born in Guatemala in 1896 (140.3 cm; 135.8– 144.8). The height differential between the tallest and shortest populations was 19-20 cm a century ago, and has remained the same for women and increased for men a century later despite substantial changes in the ranking of countries.
|
|
| 2. |
- Zhou, Bin, et al.
(författare)
-
Worldwide trends in diabetes since 1980: A pooled analysis of 751 population-based studies with 4.4 million participants
- 2016
-
Ingår i: The Lancet. - : Elsevier B.V.. - 0140-6736 .- 1474-547X. ; 387:10027, s. 1513-1530
-
Tidskriftsartikel (refereegranskat)abstract
- Background: One of the global targets for non-communicable diseases is to halt, by 2025, the rise in the age standardised adult prevalence of diabetes at its 2010 levels. We aimed to estimate worldwide trends in diabetes, how likely it is for countries to achieve the global target, and how changes in prevalence, together with population growth and ageing, are aff ecting the number of adults with diabetes.Methods: We pooled data from population-based studies that had collected data on diabetes through measurement of its biomarkers. We used a Bayesian hierarchical model to estimate trends in diabetes prevalence-defined as fasting plasma glucose of 7.0 mmol/L or higher, or history of diagnosis with diabetes, or use of insulin or oral hypoglycaemic drugs-in 200 countries and territories in 21 regions, by sex and from 1980 to 2014. We also calculated the posterior probability of meeting the global diabetes target if post-2000 trends continue.Findings: We used data from 751 studies including 4372000 adults from 146 of the 200 countries we make estimates for. Global age-standardised diabetes prevalence increased from 4.3% (95% credible interval 2.4-17.0) in 1980 to 9.0% (7.2-11.1) in 2014 in men, and from 5.0% (2.9-7.9) to 7.9% (6.4-9.7) in women. The number of adults with diabetes in the world increased from 108 million in 1980 to 422 million in 2014 (28.5% due to the rise in prevalence, 39.7% due to population growth and ageing, and 31.8% due to interaction of these two factors). Age-standardised adult diabetes prevalence in 2014 was lowest in northwestern Europe, and highest in Polynesia and Micronesia, at nearly 25%, followed by Melanesia and the Middle East and north Africa. Between 1980 and 2014 there was little change in age-standardised diabetes prevalence in adult women in continental western Europe, although crude prevalence rose because of ageing of the population. By contrast, age-standardised adult prevalence rose by 15 percentage points in men and women in Polynesia and Micronesia. In 2014, American Samoa had the highest national prevalence of diabetes (>30% in both sexes), with age-standardised adult prevalence also higher than 25% in some other islands in Polynesia and Micronesia. If post-2000 trends continue, the probability of meeting the global target of halting the rise in the prevalence of diabetes by 2025 at the 2010 level worldwide is lower than 1% for men and is 1% for women. Only nine countries for men and 29 countries for women, mostly in western Europe, have a 50% or higher probability of meeting the global target.Interpretation: Since 1980, age-standardised diabetes prevalence in adults has increased, or at best remained unchanged, in every country. Together with population growth and ageing, this rise has led to a near quadrupling of the number of adults with diabetes worldwide. The burden of diabetes, both in terms of prevalence and number of adults aff ected, has increased faster in low-income and middle-income countries than in high-income countries.
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Li, Jian-Li, et al.
(författare)
-
Effect of FeO on the formation of spinel phases and chromium distribution in the CaO-SiO2-MgO-Al2O3-Cr2O3 system
- 2013
-
Ingår i: International Journal of Minerals, Metallurgy and Materials. - : Springer Science and Business Media LLC. - 1674-4799 .- 1869-103X. ; 20:3, s. 253-258
-
Tidskriftsartikel (refereegranskat)abstract
- Synthetic slag samples of the CaO-SiO2-MgO-Al2O3-Cr2O3 system were obtained to clarify the effect of FeO on the formation of spinel phases and Cr distribution. X-ray diffraction (XRD) and scanning electron microscopy (SEM) equipped with energy-dispersive spectroscopy (EDS), as well as the thermodynamic software FactSage 6.2, were used for sample characterization. The results show that the addition of FeO can decrease the viscosity of molten slag and the precipitation temperatures of melilite and merwinite. The solidus temperature significantly decreases from 1400 to 1250 degrees C with the increase of FeO content from 0wt% to 6wt%. The addition of FeO could enhance the content of Cr in spinel phases and reduce the content of Cr in soluble minerals, such as merwinite, melilite, and dicalcium silicate. Hence, the addition of FeO is conducive to decreasing Cr leaching.
|
|
| 6. |
- Meng, Yonggang, et al.
(författare)
-
A review of recent advances in tribology
- 2020
-
Ingår i: Friction. - : Springer. - 2223-7690 .- 2223-7704. ; 8, s. 221-300
-
Forskningsöversikt (refereegranskat)abstract
- The reach of tribology has expanded in diverse fields and tribology related research activities have seen immense growth during the last decade. This review takes stock of the recent advances in research pertaining to different aspects of tribology within the last 2 to 3 years. Different aspects of tribology that have been reviewed including lubrication, wear and surface engineering, biotribology, high temperature tribology, and computational tribology. This review attempts to highlight recent research and also presents future outlook pertaining to these aspects. It may however be noted that there are limitations of this review. One of the most important of these is that tribology being a highly multidisciplinary field, the research results are widely spread across various disciplines and there can be omissions because of this. Secondly, the topics dealt with in the field of tribology include only some of the salient topics (such as lubrication, wear, surface engineering, biotribology, high temperature tribology, and computational tribology) but there are many more aspects of tribology that have not been covered in this review. Despite these limitations it is hoped that such a review will bring the most recent salient research in focus and will be beneficial for the growing community of tribology researchers.
|
|
| 7. |
- Xu, An.Jun, et al.
(författare)
-
Recycling of EAF dust by smelting in the electric arc furnace and its influences on the EAF operation and dust generation
- 2010
-
Ingår i: Journal of Iron and Steel Research International. - 1006-706X .- 2210-3988. ; 17:Suppl. 2, s. 132-141
-
Tidskriftsartikel (refereegranskat)abstract
- The 2(nd) campaign for recycling electric arc furnace dust (EAFD) has been carried out at Uddeholms AB (early as Uddeholm Tooling AB). Studies examining the effects of EAFD smelting on parameters related to EAF products, energy consumption and EAFD generation have been performed jointly by Uddeholms AB and MiMeR, Minerals and Metals Recycling Research Center, at Lulea University of Technology. 114 tonnes of EAFD were smelted in 121 EAF heats during the campaign. Dust samples were taken isokinetically from the exhaust gas system during the charger processing. Data of Zn contents in the dust samples were combined with other results to examine the influence of EAF operating conditions and EAFD recycling on Zn evaporation. Via EAFD recycling, Zn content in dust increased from 21.5% to 29.7% and the quantity of dust decreased by more than 40%. There were hardly any negative impact noted during the campaign on the furnace energy consumption and properties of steel and slag tapped from the EAF, while the recycled EAFD was amounted to around 2% of the steel weight
|
|
| 8. |
- Yang, Qixing, et al.
(författare)
-
Briquette Smelting in Electric Arc Furnace to Recycle Wastes from Stainless Steel Production
- 2015
-
Ingår i: Journal of Iron and Steel Research International. - 1006-706X .- 2210-3988. ; 22:Suppl. 1, s. 10-16
-
Tidskriftsartikel (refereegranskat)abstract
- Wastes from stainless steel production were briquetted together with carbon for smelt-reduction in the electric arc furnace, EAF, to achieve an internal recycling. A laboratory induction furnace was used to simulate the EAF. With a close simulation of the smelting, disintegration of the briquettes heated under load and recovery of metals from briquettes melted together with stainless steel and slag former were investigated. The influences of test conditions on carbon reduction of oxides in the briquettes were also examined. The briquettes endured heating at 1 186 °C under load of 3.5 kg and could be charged to the melt in small quantity without causing serious splashing. For a high metal recovery, it was necessary to charge the briquettes together with slag former. Small local zones of smelt-reduction with high carbon concentration could thus be formed during the charger heating. Silicon content in the metal near to the briquettes should be minimised to achieve a high degree of carbon reduction. Based on results obtained from this study, suggestions were made on smooth operations of smelt-reduction of the briquettes by using EAF or induction furnace with large scales.
|
|
| 9. |
- Yang, Qixing, et al.
(författare)
-
Studies of using slags from ore based steelmaking to produce sulphoaluminate belite cement with reduced CO2 emission
- 2015
-
Ingår i: Proceedings of the 6th International Congress on the Science and Technology of Steelmaking. - : The Chinese Society for Metals. - 9780000000002 ; , s. 962-965
-
Konferensbidrag (refereegranskat)abstract
- The aim of the present studies is to examine the potential for using basic oxygen furnace, ladle and blast furnace slags from Swedish works of ore based steelmaking in production of clinkers for sulphoaluminate belite cement. The slags and chemicals were mixed to form briquettes for burning at 1300 . Samples of the clinker briquettes obtained were characterized by different methods. The sulphoaluminate and other phases in the clinker samples were detected by XRD. These and other results showed that the slags can be used in the cement, stabilizing belite phase in the clinkers and enhancing heat fluxes or the degrees of hydration measured in the early, 24-hour period for the clinkers, thus to allow for more sustainable steel and cement production.
|
|
| 10. |
- Zhang, Hui-ning, et al.
(författare)
-
Carbothermic Reduction of Zinc and Iron Oxides in Electric Arc Furnace Dust
- 2014
-
Ingår i: Journal of Iron and Steel Research International. - 1006-706X .- 2210-3988. ; 21:4, s. 427-432
-
Tidskriftsartikel (refereegranskat)abstract
- The reduction of zinc and iron oxides from electric arc furnace dust (EAFD) by carbon was investigated at temperatures between 800 and 1300 °C. The analytic technique employed includes chemical analysis, X-ray fluorescence spectroscopy (XRF), X-ray powder diffraction (XRD), scanning electron microscopy (SEM) equipped with X-ray energy dispersive spectrometry (EDS), and thermodynamic database FactSage 6. 2. It was found that the reduction of zinc and iron oxides depends largely on Boudouad reaction. At 900 °C, zinc exists in tested samples as ZnO, which is reduced in the temperature range of 1000 — 1100 °C. At 1100 °C, 99. 11% of the zinc is evaporated. The metallization ratio of Fe is 79. 19% at 1300 °C, as the content of Fe2+ is still 9. 40%. A higher temperature is thus required for a higher reduction degree of Fe oxides by solid or gaseous carbon
|
|
