| 1. |
- Lobov, Gleb S., et al.
(författare)
-
Electric field induced optical anisotropy of P3HT nanofibers in a liquid solution
- 2015
-
Ingår i: Optical Materials Express. - : Optical Society of America. - 2159-3930 .- 2159-3930. ; 5:11, s. 2642-2647
-
Tidskriftsartikel (refereegranskat)abstract
- The nanofiber morphology of regioregular Poly-3- hexylthiophene (P3HT) is a 1D crystalline structure organized by π - π stacking of the backbone chains. In this study, we report the impact of electric field on the orientation and optical properties of P3HT nanofibers dispersed in liquid solution. We demonstrate that alternating electric field aligns nanofibers, whereas static electric field forces them to migrate towards the cathode. The alignment of nanofibers introduces anisotropic optical properties, which can be dynamically manipulated until the solvent has evaporated. Time resolved spectroscopic measurements revealed that the electro-optical response time decreases significantly with the magnitude of applied electric field. Thus, for electric field 1.3 V ·μm-1 the response time was measured as low as 20 ms, while for 0.65 V ·μm-1 it was 110-150 ms. Observed phenomenon is the first mention of P3HT supramolecules associated with electrooptical effect. Proposed method provides real time control over the orientation of nanofibers, which is a starting point for a novel practical implementation. With further development P3HT nanofibers can be used individually as an anisotropic solution or as an active component in a guest-host system.
|
|
| 2. |
- Chen, Hui, et al.
(författare)
-
Refractive index of delignified wood for transparent biocomposites
- 2020
-
Ingår i: RSC Advances. - 2046-2069. ; 10, s. 40719-40724
-
Tidskriftsartikel (refereegranskat)abstract
- Refractive index (RI) determination for delignified wood templates is vital for transparent wood composite fabrication. Reported RIs in the literature are based on either single plant fibers or wood powder, measured by the immersion liquid method (ILM) combined with mathematical fitting. However, wood structure complexity and the physical background of the fitting were not considered. In this work, RIs of delignified wood templates were measured by the ILM combined with a light transmission model developed from the Fresnel reflection/refraction theory for composite materials. The RIs of delignified balsa wood are 1.536 ± 0.006 and 1.525 ± 0.008 at the wavelength of 589 nm for light propagating perpendicular and parallel to the wood fiber direction, respectively. For delignified birch wood, corresponding values are 1.537 ± 0.005 and 1.529 ± 0.006, respectively. The RI data for delignified wood scaffolds are important for tailoring optical properties of transparent wood biocomposites, and also vital in optical properties investigations by theoretical modelling of complex light propagation in transparent wood and related composites. The developed light transmission model in combination with the immersion liquid method can be used to determine the RI of complex porous or layered solid materials and composites.
|
|
| 3. |
- Chen, Hui, et al.
(författare)
-
Refractive index of delignified wood for transparent biocomposites
- 2020
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 10:67, s. 40719-40724
-
Tidskriftsartikel (refereegranskat)abstract
- Refractive index (RI) determination for delignified wood templates is vital for transparent wood composite fabrication. Reported RIs in the literature are based on either single plant fibers or wood powder, measured by the immersion liquid method (ILM) combined with mathematical fitting. However, wood structure complexity and the physical background of the fitting were not considered. In this work, RIs of delignified wood templates were measured by the ILM combined with a light transmission model developed from the Fresnel reflection/refraction theory for composite materials. The RIs of delignified balsa wood are 1.536 ± 0.006 and 1.525 ± 0.008 at the wavelength of 589 nm for light propagating perpendicular and parallel to the wood fiber direction, respectively. For delignified birch wood, corresponding values are 1.537 ± 0.005 and 1.529 ± 0.006, respectively. The RI data for delignified wood scaffolds are important for tailoring optical properties of transparent wood biocomposites, and also vital in optical properties investigations by theoretical modelling of complex light propagation in transparent wood and related composites. The developed light transmission model in combination with the immersion liquid method can be used to determine the RI of complex porous or layered solid materials and composites.
|
|
| 4. |
- Chen, Hui, et al.
(författare)
-
Thickness Dependence of Optical Transmittance of Transparent Wood : Chemical Modification Effects
- 2019
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 11:38, s. 35451-35457
-
Tidskriftsartikel (refereegranskat)abstract
- Transparent wood (TW) is an emerging optical material combining high optical transmittance and haze for structural applications. Unlike nonscattering absorbing media, the thickness dependence of light transmittance for TW is complicated because optical losses are also related to increased photon path length from multiple scattering. In the present study, starting from photon diffusion equation, it is found that the angle-integrated total light transmittance of TW has an exponentially decaying dependence on sample thickness. The expression reveals an attenuation coefficient which depends not only on the absorption coefficient but also on the diffusion coefficient. The total transmittance and thickness were measured for a range of TW samples, from both acetylated and nonacetylated balsa wood templates, and were fitted according to the derived relationship. The fitting gives a lower attenuation coefficient for the acetylated TW compared to the nonacetylated one. The lower attenuation coefficient for the acetylated TW is attributed to its lower scattering coefficient or correspondingly lower haze. The attenuation constant resulted from our model hence can serve as a singular material parameter that facilitates cross-comparison of different sample types, at even different thicknesses, when total optical transmittance is concerned. The model was verified with two other TWs (ash and birch) and is in general applicable to other scattering media.
|
|
| 5. |
- Lobov, Gleb S., et al.
(författare)
-
Electro-optical response of P3HT nanofibers in liquid solution
- 2015
-
Ingår i: Asia Communications and Photonics Conference 2015. - : Optical Society of America. - 9781943580064
-
Konferensbidrag (refereegranskat)abstract
- AC electric poling introduces in P3HT nanofibers anisotropic electro-optical response and birefringence. Along with birefringence, such material exhibits strong amplitude modulation which makes it more efficient alternative to liquid crystals.
|
|
| 6. |
- Popov, Sergei, et al.
(författare)
-
Polymer photonics and nano-materials for optical communication
- 2018
-
Ingår i: 2018 17th Workshop on Information Optics, WIO 2018. - : Institute of Electrical and Electronics Engineers Inc.. - 9781538660133
-
Konferensbidrag (refereegranskat)abstract
- Polymer materials offer process compatibility, design flexibility, and low cost technology as a multi-functional platform for optical communication and photonics applications. Design and thermal reflowing technology of low loss polymer waveguides, as well as demonstration of transparent wood laser are presented in this paper.
|
|
| 7. |
- Vasileva, Elena, et al.
(författare)
-
Effect of transparent wood on the polarization degree of light
- 2019
-
Ingår i: Optics Letters. - : Optical Society of America. - 0146-9592 .- 1539-4794. ; 44:12, s. 2962-2965
-
Tidskriftsartikel (refereegranskat)abstract
- We report on the study of polarization properties of light propagating through transparent wood (TW), which is an anisotropically scattering medium, and consider two cases: completely polarized and totally unpolarized light. It was demonstrated that scattered light distribution is affected by the polarization state of incident light. Scattering is the most efficient for light polarized parallel to cellulose fibers. Furthermore, unpolarized light becomes partially polarized (with a polarization degree of 50%) after propagating through the TW. In the case of totally polarized incident light, however, the degree of polarization of transmitted light is decreased, in an extreme case to a few percent, and reveals an unusual angular dependence on the material orientation. The internal hierarchical complex structure of the material, in particular cellulose fibrils organized in lamellae, is believed to be responsible for the change of the light polarization degree. It was demonstrated that the depolarization properties are determined by the angle between the polarization of light and the wood fibers, emphasizing the impact of their internal structure, unique for different wood species.
|
|
| 8. |
- Vasileva, Elena, et al.
(författare)
-
Light Scattering by Structurally Anisotropic Media : A Benchmark with Transparent Wood
- 2018
-
Ingår i: Advanced Optical Materials. - : John Wiley & Sons. - 2162-7568 .- 2195-1071. ; 6:23
-
Tidskriftsartikel (refereegranskat)abstract
- Transparent wood (TW) is a biocomposite material with hierarchical structure, which exhibits high optical transmittance and anisotropic light scattering. Here, the relation between anisotropic scattering and the internal structure of transparent wood is experimentally studied and the dependence of scattering anisotropy on material thickness, which characterizes the fraction of ballistic photons in the propagating light, is shown. The limitations of the conven-tional haze, as it is implemented to isotropic materials, are discussed, and a modified characteristic parameter of light scattering—the degree of aniso-tropic scattering is defined. This parameter together with the transport mean free path value is more practical and convenient for characterization of the material scattering properties. It is believed that the generic routine described in this paper can be applied for scattering characterization and comparison of other TW materials of either different thickness, optical quality or based on various wood species.
|
|
