| 1. |
|
|
| 2. |
|
|
| 3. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 4. |
|
|
| 5. |
- Kristan, M., et al.
(författare)
-
The Eighth Visual Object Tracking VOT2020 Challenge Results
- 2020
-
Ingår i: Computer Vision. - Cham : Springer International Publishing. - 9783030682378 ; , s. 547-601
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2020 is the eighth annual tracker benchmarking activity organized by the VOT initiative. Results of 58 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The VOT2020 challenge was composed of five sub-challenges focusing on different tracking domains: (i) VOT-ST2020 challenge focused on short-term tracking in RGB, (ii) VOT-RT2020 challenge focused on “real-time” short-term tracking in RGB, (iii) VOT-LT2020 focused on long-term tracking namely coping with target disappearance and reappearance, (iv) VOT-RGBT2020 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2020 challenge focused on long-term tracking in RGB and depth imagery. Only the VOT-ST2020 datasets were refreshed. A significant novelty is introduction of a new VOT short-term tracking evaluation methodology, and introduction of segmentation ground truth in the VOT-ST2020 challenge – bounding boxes will no longer be used in the VOT-ST challenges. A new VOT Python toolkit that implements all these novelites was introduced. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website (http://votchallenge.net ).
|
|
| 6. |
- Jacob, A P, et al.
(författare)
-
Cryogenic performance of ultrathin oxide MOS capacitors with in situ doped p(+) poly-Si1-xGex and poly-Si gate materials
- 2002
-
Ingår i: Semiconductor Science and Technology. - : Iop Publishing Ltd. - 0268-1242 .- 1361-6641. ; 17:9, s. 942-946
-
Tidskriftsartikel (refereegranskat)abstract
- A low-temperature electrical characterization of ultrathin oxide MOS capacitors with p(+) poly-Si1-xGex and poly-Si gate is performed. The investigated structures are suitable for future nano-scaled high speed MOSFETs. The aim of this study is to compare the low-temperature performance of poly-Si1-xGex and poly-Si gate MOS structures in the nanoscale channel length regime. Apart from the significant change in the flat band voltage, the result shows that all the poly-Si and poly-Si1-xGex gated MOS structures exhibit two centres of polarity change (zero-temperature coefficients) in capacitance. The second polarity change leads to an exclusive phenomenon in these structures. The low-temperature capacitance is found to be less than high-temperature capacitance at strong accumulation and this is in contrast to what has been observed so far in metal-gated capacitors. It is also observed that the temperature dependence of the tunnelling current is only on the oxide thickness and not on the gate material used.
|
|
| 7. |
- Ye, L L, et al.
(författare)
-
Structural roughness and interface strain properties in Si/SiO2/poly-Si1-xGex tri-layer system with ultrathin oxide
- 2003
-
Ingår i: Journal of materials science. Materials in electronics. - : Springer Science Business Media. - 0957-4522 .- 1573-482X. ; 14:4, s. 247-254
-
Tidskriftsartikel (refereegranskat)abstract
- We have explored the microstructure and local interface strain in the poly-Si1-xGex/SiO2/Si tri-layer system with ultrathin oxides. High-resolution transmission electron microscopy (HRTEM) and high-resolution X-ray diffraction rocking curves (HR-RC) and two-dimensional reciprocal space mapping (2D-RSM) were the main characterization tools. The poly-Si1-xGex/SiO2/Si structures have x=0, 0.2, and 0.35 for ultrathin oxides (2.0-3.0 nm). The result shows that for the adopted growth process, the poly grain size depends very strongly on the Ge concentration, and it increases with increasing Ge mole fraction. In turn, this increase of the grain size in the poly-Si1-xGex/SiO2/Si reduces the strain in the film, which then affects the interface strain at the lower SiO2/Si interface. In addition, the presence of defects at the SiO2/Si interface was found to be greater for samples with no local interface strain.
|
|
| 8. |
- Aksoy, Selim, et al.
(författare)
-
Algorithm Performance Contest
- 2000
-
Ingår i: Proceedings. 15th International Conference on Pattern Recognition, 2000. - : IEEE. - 0769507506 ; , s. 870-876
-
Konferensbidrag (refereegranskat)abstract
- This contest involved the running and evaluation of computer vision and pattern recognition techniques on different data sets with known groundwidth. The contest included three areas; binary shape recognition, symbol recognition and image flow estimation. A package was made available for each area. Each package contained either real images with manual groundtruth or programs to generate data sets of ideal as well as noisy images with known groundtruth. They also contained programs to evaluate the results of an algorithm according to the given groundtruth. These evaluation criteria included the generation of confusion matrices, computation of the misdetection and false alarm rates and other performance measures suitable for the problems. The paper summarizes the data generation for each area and experimental results for a total of six participating algorithms
|
|
| 9. |
- Liu, Jian, et al.
(författare)
-
Amphipathic Side Chain of a Conjugated Polymer Optimizes Dopant Location toward Efficient N-Type Organic Thermoelectrics
- 2021
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 33
-
Tidskriftsartikel (refereegranskat)abstract
- There is no molecular strategy for selectively increasing the Seebeck coefficient without reducing the electrical conductivity for organic thermoelectrics. Here, it is reported that the use of amphipathic side chains in an n-type donor-acceptor copolymer can selectively increase the Seebeck coefficient and thus increase the power factor by a factor of approximate to 5. The amphipathic side chain contains an alkyl chain segment as a spacer between the polymer backbone and an ethylene glycol type chain segment. The use of this alkyl spacer does not only reduce the energetic disorder in the conjugated polymer film but can also properly control the dopant sites away from the backbone, which minimizes the adverse influence of counterions. As confirmed by kinetic Monte Carlo simulations with the host-dopant distance as the only variable, a reduced Coulombic interaction resulting from a larger host-dopant distance contributes to a higher Seebeck coefficient for a given electrical conductivity. Finally, an optimized power factor of 18 mu W m(-1) K-2 is achieved in the doped polymer film. This work provides a facile molecular strategy for selectively improving the Seebeck coefficient and opens up a new route for optimizing the dopant location toward realizing better n-type polymeric thermoelectrics.
|
|
| 10. |
- Liu, Shaohui, et al.
(författare)
-
Data-Driven Controlled Synthesis of Oriented Quasi-Spherical CsPbBr3 Perovskite Materials
- 2024
-
Ingår i: Angewandte Chemie International Edition. - : WILEY-V C H VERLAG GMBH. - 1433-7851 .- 1521-3773. ; 63:14
-
Tidskriftsartikel (refereegranskat)abstract
- Controlled synthesis of lead-halide perovskite crystals is challenging yet attractive because of the pivotal role played by the crystal structure and growth conditions in regulating their properties. This study introduces data-driven strategies for the controlled synthesis of oriented quasi-spherical CsPbBr3, alongside an investigation into the synthesis mechanism. High-throughput rapid characterization of absorption spectra and color under ultraviolet illumination was conducted using 23 possible ligands for the synthesis of CsPbBr3 crystals. The links between the absorption spectra slope (difference in the absorbance at 400 nm and 450 nm divided by a wavelength interval of 50 nm) and crystal size were determined through statistical analysis of more than 100 related publications. Big data analysis and machine learning were employed to investigate a total of 688 absorption spectra and 652 color values, revealing correlations between synthesis parameters and properties. Ex situ characterization confirmed successful synthesis of oriented quasi-spherical CsPbBr3 perovskites using polyvinylpyrrolidone and Acacia. Density functional theory calculations highlighted strong adsorption of Acacia on the (110) facet of CsPbBr3. Optical properties of the oriented quasi-spherical perovskites prepared with these data-driven strategies were significantly improved. This study demonstrates that data-driven controlled synthesis facilitates morphology-controlled perovskites with excellent optical properties.
|
|
