| 1. |
- Kim, Eun Jeong, et al.
(författare)
-
Importance of Superstructure in Stabilizing Oxygen Redox in P3-Na0.67Li0.2Mn0.8O2
- 2022
-
Ingår i: Advanced Energy Materials. - : John Wiley & Sons. - 1614-6832 .- 1614-6840. ; 12:3
-
Tidskriftsartikel (refereegranskat)abstract
- Activation of oxygen redox represents a promising strategy to enhance the energy density of positive electrode materials in both lithium and sodium-ion batteries. However, the large voltage hysteresis associated with oxidation of oxygen anions during the first charge represents a significant challenge. Here, P3-type Na0.67Li0.2Mn0.8O2 is reinvestigated and a ribbon superlattice is identified for the first time in P3-type materials. The ribbon superstructure is maintained over cycling with very minor unit cell volume changes in the bulk while Li ions migrate reversibly between the transition metal and Na layers at the atomic scale. In addition, a range of spectroscopic techniques reveal that a strongly hybridized Mn 3d-O 2p favors ligand-to-metal charge transfer, also described as a reductive coupling mechanism, to stabilize reversible oxygen redox. By preparing materials under three different synthetic conditions, the degree of ordering between Li and Mn is varied. The sample with the maximum cation ordering delivers the largest capacity regardless of the voltage windows applied. These findings highlight the importance of cationic ordering in the transition metal layers, which can be tuned by synthetic control to enhance anionic redox and hence energy density in rechargeable batteries.
|
|
| 2. |
- Kim, Eun Jeong, et al.
(författare)
-
Oxygen Redox Activity through a Reductive Coupling Mechanism in the P3-Type Nickel-Doped Sodium Manganese Oxide
- 2020
-
Ingår i: ACS Applied Energy Materials. - : AMER CHEMICAL SOC. - 2574-0962. ; 3:1, s. 184-191
-
Tidskriftsartikel (refereegranskat)abstract
- Increasing dependence on rechargeable batteries for energy storage calls for the improvement of energy density of batteries. Toward this goal, introduction of positive electrode materials with high voltage and/or high capacity is in high demand. The use of oxygen chemistry in lithium and sodium layered oxides has been of interest to achieve high capacity. Nevertheless, a complete understanding of oxygen-based redox processes remains elusive especially in sodium ion batteries. Herein, a novel P3-type Na0.67Ni0.2Mn0.8O2, synthesized at low temperature, exhibits oxygen redox activity in high potentials. Characterization using a range of spectroscopic techniques reveals the anionic redox activity is stabilized by the reduction of Ni, because of the strong Ni 3d-O 2p hybridization states created during charge. This observation suggests that different route of oxygen redox processes occur in P3 structure materials, which can lead to the exploration of oxygen redox chemistry for further development in rechargeable batteries.
|
|
| 3. |
- Kim, Eun Jeong, et al.
(författare)
-
Vacancy-Enhanced Oxygen Redox Reversibility in P3-Type Magnesium-Doped Sodium Manganese Oxide Na0.67Mg0.2Mn0.8O2
- 2020
-
Ingår i: ACS Applied Energy Materials. - : AMER CHEMICAL SOC. - 2574-0962. ; 3:11, s. 10423-10434
-
Tidskriftsartikel (refereegranskat)abstract
- Lithium-rich layered oxides and sodium layered oxides represent attractive positive electrode materials exhibiting excess capacity delivered by additional oxygen redox activity. However, structural degradation in the bulk and detrimental reactions with the electrolyte on the surface often occur, leading to limited reversibility of oxygen redox processes. Here, we present the properties of P3-type Na0.67Mg0.2Mn0.8O2 synthesized under both air and oxygen. Both materials exhibit stable cycling performance in the voltage range of 1.8-3.8 V, where the Mn3+/Mn4+ redox couple entirely dominates the electrochemical reaction. Oxygen redox activity is triggered for both compounds in the wider voltage window 1.8-4.3 V with typical large voltage hysteresis from nonbonding O 2p states generated by substituted Mg. Interestingly, for the compound prepared under oxygen, an additional novel reversible oxygen redox activity is shown with an exceptionally small voltage hysteresis (20 mV). The presence of vacancies in the transition-metal layers is shown to play a critical role not only in forming unpaired O 2p states independent of substituted elements but also in stabilizing the P3 structure during charge with reduced structural transformation to the O'3 phase at the end of discharge. This study reveals the important role of vacancies in P3-type sodium layered oxides to increase energy density using both cationic and anionic redox processes.
|
|
| 4. |
- Linnell, Stephanie F., et al.
(författare)
-
Effect of Ti-Substitution on the Properties of P3 Structure Na2/3Mn0.8Li0.2O2 Showing a Ribbon Superlattice
- 2022
-
Ingår i: ChemElectroChem. - : Wiley-Blackwell. - 2196-0216. ; 9:19
-
Tidskriftsartikel (refereegranskat)abstract
- Oxygen anion redox offers an effective strategy to enhance the energy density of layered oxide positive electrodes for sodium- and lithium-ion batteries. However, lattice oxygen loss and irreversible structural transformations over the first cycle may result in large voltage hysteresis, thereby impeding practical application. Herein, ribbon superstructure ordering of Li/transition-metal-ions was applied to suppress the voltage hysteresis combined with Ti-substitution to improve the cycling stability for P3-Na0.67Li0.2Ti0.15Mn0.65O2. When both cation and anion redox reactions are utilized, Na0.67Li0.2Ti0.15Mn0.65O2 delivers a reversible capacity of 172 mA h g(-1) after 25 cycles at 10 mA g(-1) between 1.6-4.4 V vs. Na+/Na. Ex-situ X-ray diffraction data reveal that the ribbon superstructure is retained with negligible unit cell volume expansion/contraction upon sodiation/desodiation. The performance as a positive electrode for Li-ion batteries was also evaluated and P3-Na0.67Li0.2Ti0.15Mn0.65O2 delivers a reversible capacity of 180 mA h g(-1) after 25 cycles at 10 mA g(-1) when cycled vs. Li+/Li between 2.0-4.8 V.
|
|
| 5. |
- Tapia-Ruiz, Nuria, et al.
(författare)
-
2021 roadmap for sodium-ion batteries
- 2021
-
Ingår i: Journal of Physics. - : Institute of Physics Publishing (IOPP). - 2515-7655. ; 3:3
-
Tidskriftsartikel (refereegranskat)abstract
- Increasing concerns regarding the sustainability of lithium sources, due to their limited availability and consequent expected price increase, have raised awareness of the importance of developing alternative energy-storage candidates that can sustain the ever-growing energy demand. Furthermore, limitations on the availability of the transition metals used in the manufacturing of cathode materials, together with questionable mining practices, are driving development towards more sustainable elements. Given the uniformly high abundance and cost-effectiveness of sodium, as well as its very suitable redox potential (close to that of lithium), sodium-ion battery technology offers tremendous potential to be a counterpart to lithium-ion batteries (LIBs) in different application scenarios, such as stationary energy storage and low-cost vehicles. This potential is reflected by the major investments that are being made by industry in a wide variety of markets and in diverse material combinations. Despite the associated advantages of being a drop-in replacement for LIBs, there are remarkable differences in the physicochemical properties between sodium and lithium that give rise to different behaviours, for example, different coordination preferences in compounds, desolvation energies, or solubility of the solid-electrolyte interphase inorganic salt components. This demands a more detailed study of the underlying physical and chemical processes occurring in sodium-ion batteries and allows great scope for groundbreaking advances in the field, from lab-scale to scale-up. This roadmap provides an extensive review by experts in academia and industry of the current state of the art in 2021 and the different research directions and strategies currently underway to improve the performance of sodium-ion batteries. The aim is to provide an opinion with respect to the current challenges and opportunities, from the fundamental properties to the practical applications of this technology.
|
|
