| 1. |
- Das, S., et al.
(författare)
-
Instability of Ionic Liquid-Based Electrolytes in Li-O2 Batteries
- 2015
-
Ingår i: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 119:32, s. 18084-18090
-
Tidskriftsartikel (refereegranskat)abstract
- Ionic liquids (ILs) have been proposed as promising solvents for Li-air battery electrolytes. Here, several ILs have been investigated using differential electrochemical mass spectrometry (DEMS) to investigate the electrochemical stability in a Li-O-2 system, by means of quantitative determination of the rechargeability (GER/ORR), and thereby the Coulombic efficiency of discharge and charge. None of the IL-based electrolytes are found to behave as needed for a functional Li-O-2 battery but perform better than commonly used organic solvents. Also the extent of rechargeability/reversibility has been found to be strongly dependent on the choice of IL cation and anion as well as various impurities.
|
|
| 2. |
- Jankowski, Piotr, 1990, et al.
(författare)
-
Prospects for Improved Magnesocene-Based Magnesium Battery Electrolytes
- 2021
-
Ingår i: Batteries and Supercaps. - : Wiley. - 2566-6223. ; 4:8, s. 1335-1343
-
Tidskriftsartikel (refereegranskat)abstract
- Magnesium batteries are currently attracting a lot of interest as a next generation battery technology. One critical issue is to find a suitable electrolyte and herein we explore an electrolyte based on magnesocene (MgCp2) in tetrahydrofuran (THF), aiming for low-voltage Mg batteries, with respect to: Mg plating characteristics, electrochemical stability windows, electrolyte speciation, and electrolyte decomposition reactions; both experimentally and computationally. Overall, the electrolyte does not seem to decompose on a Mg metal anode and most likely reduced solvation of Mg2+ by the Cp- anion is important and species such as MgCp2THF2 may play an important role for Mg plating with small overpotential. The oxidation limit is largely determined by the Cp- anion and density functional theory predicted oxidation reactions point to polymerized end-products to be possible. Furthermore, in silico substitution studies enable us to establish the prospects of some Cp- anion derivatives to further improve the oxidative stability, but still the Mg2+ solvation must be monitored for ease of reduction and Mg plating.
|
|
| 3. |
- Nilsson, Viktor, 1985, et al.
(författare)
-
Critical evaluation of the stability of highly concentrated LiTFSI - Acetonitrile electrolytes vs. graphite, lithium metal and LiFePO4 electrodes
- 2018
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753 .- 1873-2755. ; 384, s. 334-341
-
Tidskriftsartikel (refereegranskat)abstract
- Highly concentrated LiTFSI - acetonitrile electrolytes have recently been shown to stabilize graphite electrodes in lithium-ion batteries (LIBs) much better than comparable more dilute systems. Here we revisit this system in order to optimise the salt concentration vs. both graphite and lithium metal electrodes with respect to electrochemical stability. However, we observe an instability regardless of concentration, making lithium metal unsuitable as a counter electrode, and this also affects evaluation of e.g. graphite electrodes. While the highly concentrated electrolytes have much improved electrochemical stabilities, their reductive decomposition below ca. 1.2 V vs. Li + /Li° still makes them less practical vs. graphite electrodes, and the oxidative reaction with Al at ca. 4.1 V vs. Li + /Li° makes them problematic for high voltage LIB cells. The former originates in an insufficiently stable solid electrolyte interphase (SEI) dissolving and continuously reforming – causing self-discharge, as observed by paused galvanostatic cycling, while the latter is likely caused by aluminium current collector corrosion. Yet, we show that medium voltage LiFePO 4 positive electrodes can successfully be used as counter and reference electrodes.
|
|
| 4. |
- Tapia-Ruiz, Nuria, et al.
(författare)
-
2021 roadmap for sodium-ion batteries
- 2021
-
Ingår i: Journal of Physics. - : Institute of Physics Publishing (IOPP). - 2515-7655. ; 3:3
-
Tidskriftsartikel (refereegranskat)abstract
- Increasing concerns regarding the sustainability of lithium sources, due to their limited availability and consequent expected price increase, have raised awareness of the importance of developing alternative energy-storage candidates that can sustain the ever-growing energy demand. Furthermore, limitations on the availability of the transition metals used in the manufacturing of cathode materials, together with questionable mining practices, are driving development towards more sustainable elements. Given the uniformly high abundance and cost-effectiveness of sodium, as well as its very suitable redox potential (close to that of lithium), sodium-ion battery technology offers tremendous potential to be a counterpart to lithium-ion batteries (LIBs) in different application scenarios, such as stationary energy storage and low-cost vehicles. This potential is reflected by the major investments that are being made by industry in a wide variety of markets and in diverse material combinations. Despite the associated advantages of being a drop-in replacement for LIBs, there are remarkable differences in the physicochemical properties between sodium and lithium that give rise to different behaviours, for example, different coordination preferences in compounds, desolvation energies, or solubility of the solid-electrolyte interphase inorganic salt components. This demands a more detailed study of the underlying physical and chemical processes occurring in sodium-ion batteries and allows great scope for groundbreaking advances in the field, from lab-scale to scale-up. This roadmap provides an extensive review by experts in academia and industry of the current state of the art in 2021 and the different research directions and strategies currently underway to improve the performance of sodium-ion batteries. The aim is to provide an opinion with respect to the current challenges and opportunities, from the fundamental properties to the practical applications of this technology.
|
|
| 5. |
- Younesi, Reza, et al.
(författare)
-
Ether Based Electrolyte, LiB(CN)4 Salt and Binder Degradation in the Li-€“O2 Battery Studied by Hard X-ray Photoelectron Spectroscopy (HAXPES)
- 2012
-
Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 116:35, s. 18597-18604
-
Tidskriftsartikel (refereegranskat)abstract
- Li-O2 cells composed of a carbon cathode containing an α-MnO2 nanowire catalyst and a Kynar (PVDF-HFP) binder were cycled with different electrolytes containing 0.5 M LiB(CN)4 salt in polyethylene glycol dimethyl ether (PEGDME) or tetraethylene glycol dimethyl ether (Tetraglyme) solvents. All cells exhibited fast capacity fading. To explain this, the surface chemistry of the carbon electrodes were investigated by synchrotron based hard X-ray photoelectron spectroscopy (HAXPES) using two photon energies of 2300 and 6900 eV. It is shown that the LiB(CN)4 salt and Kynar binder were degraded during cycling, forming a layer composed of salt and binder residues on the cathode surface. The degradation mechanism of the salt differed in the two tested solvents and, consequently, different types of boron compounds were formed during cycling. Larger amounts of the degraded salt was observed using Tetraglyme as the solvent. With a nonfluorined Li-salt, the observed formation of LiF, which might be a reason for the observed blockage of pores in the cathode and for the observed capacity fading, must be due to Kynar binder decomposition. The amount of LiF formed in the PEGDME cell was larger than that formed in the Tetraglyme cell. The results indicate that not only the electrolyte solvent, but also electrolyte salt as well as the binder used for the porous cathode must be carefully considered when building a successful rechargeable Li-O2 battery.
|
|
| 6. |
- Younesi, Reza, et al.
(författare)
-
Li-O-2 Battery Degradation by Lithium Peroxide (Li2O2): A Model Study
- 2013
-
Ingår i: Chemistry of Materials. - : American Chemical Society (ACS). - 1520-5002 .- 0897-4756. ; 25:1, s. 77-84
-
Tidskriftsartikel (refereegranskat)abstract
- The chemical stability of the Li-O-2 battery components (cathode and electrolyte) in contact with lithium peroxide (Li2O2) was investigated using X-ray photoelectron spectroscopy (XPS). XPS is a versatile method to detect amorphous as well as crystalline decomposition products of both salts and solvents. Two strategies were employed. First, cathodes including carbon, alpha-MnO2 catalyst, and Kynar binder (PVdF-HFP) were exposed to Li2O2 and LiClO4 in propylene carbonate (PC) or tetraethylene glycol dimethyl ether (TEGDME) electrolytes. The results indicated that Li2O2 degrades TEGDME to carboxylate containing species and that the decomposition products, in turn, degraded the Kynar binder. The alpha-MnO2 catalyst was unaffected. Second, Li2O2 model surfaces were kept in contact with different electrolytes to investigate the chemical stability and also the resulting surface layer on Li2O2. Further, the XPS experiments revealed that the Li salts such as LiPF6, LiBF4, and LiC!
|
|
