| 1. |
|
|
| 2. |
- Inganäs, Olle, 1951-, et al.
(författare)
-
Alternating fluorene copolymer/fullerene blend solar cells
- 2005. - 1
-
Ingår i: Organic Photovoltaics. - Boca Raton, FL, USA : CRC Press. - 082475963X - 9780824759636 ; , s. 387-402
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Recently developed organic photovoltaics (OPVs) show distinct advantages over their inorganic counterparts due to their lighter weight, flexible shape, versatile materials synthesis and device fabrication schemes, and low cost in large-scale industrial production. Although many books currently exist on general concepts of PV and inorganic PV materials and devices, few are available that offer a comprehensive overview of recently fast developing organic and polymeric PV materials and devices.Organic Photovoltaics: Mechanisms, Materials, and Devicesfills this gap. The book provides an international perspective on the latest research in this rapidly expanding field with contributions from top experts around the world. It presents a unified approach comprising three sections: General Overviews; Mechanisms and Modeling; and Materials and Devices. Discussions include sunlight capture, exciton diffusion and dissociation, interface properties, charge recombination and migration, and a variety of currently developing OPV materials/devices. The book also includes two forewords: one by Nobel Laureate Dr. Alan J. Heeger, and the other by Drs. Aloysius Hepp and Sheila Bailey of NASA Glenn Research Center.Organic Photovoltaics equips students, researchers, and engineers with knowledge of the mechanisms, materials, devices, and applications of OPVs necessary to develop cheaper, lighter, and cleaner renewable energy throughout the coming decades.
|
|
| 3. |
- Jin, Yingzhi, 1991-
(författare)
-
Organic electronic devices for solar energy conversion and storage
- 2020
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- This thesis focuses on two types of organic electronic devices: organic photovoltaic (OPV) devices for solar energy conversion, and photo-capacitors for energy storage.OPVs have been under the focus of research for decades as an effective technique to convert solar energy to electricity. So far, the efficiency of bulk heterojunction OPV consisting donor and acceptor materials is approaching to 18% with non-fullerene acceptor (NFA), which make it close to commercialization. The process of charge generation and recombination are two competing processes in OPVs, since their requirements for the active layer morphology are contradictory. Large donor/acceptor interfaces facilitate charge generation but hinder the transporting pathways for charge transportation. The simultaneously enhanced charge generation and transportation are achieved by using the ternary strategy in my first paper. The fully mixed donors and NFAs are beneficial for the charge generation and fullerene is introduced as an extra electron transport channel. The hierarchical morphology of the blend film is confirmed by the TEM results. The voltage loss analyses indicate that the hierarchical morphology could suppress unfavorable charge transfer state and non-radiative recombination loss. In my second paper, efficient charge generation with low voltage loss are achieved in the solar cells by rational designing a series of NFAs. The detailed voltage losses are discussed in these binary systems, revealing the critical relationship between radiative efficiency and device performance.To harvest photocurrent in OPVs, long lifetime triplet excitons are highly expected to be good candidates. The potential of triplet materials in OPVs has been explored since 1970s. However, the performance of the triplet materials-based OPVs is far behind. The voltage loss in triplet OPVs is intensively studied in my third work. A higher open circuit voltage (0.88 V) is observed for Ir(FOtbpa)3-based devices than those of Ir(Ftbpa)3 (0.80 V) despite a lower charge transfer state energy. To understand above result, the voltage losses through radiative and non-radiative recombination pathways in two devices are quantitively investigated, which indicate a reduced non-radiative recombination loss in the Ir(FOtbpa)3-based devices.The fluctuation of sun irradiation resulting the unstable output power of solar cells. Therefore, it is important to store electricity of solar cells for later use. Integrated photo-capacitor (IPC), combining a solar cell and a super-capacitor by sharing one common electrode, is able to simultaneously realize the energy harvesting and storage. Building upon this advantage, IPC devices received tremendous research attention. In my fourth and last papers, we introduced super-capacitors to construct IPC devices with OPV device or modules. A free standing thick- PEDOT:PSS film is successfully integrated into an all solution-processed IPC device as the common electrode. Resulting devices demonstrate good performance and outstanding stability. With solar PV modules, a higher voltage can be generated and stored by asymmetric supercapacitors, which could be used as a portable power unit.
|
|
| 4. |
|
|
| 5. |
- Liu, Yanfeng, 1992-
(författare)
-
Studying Morphology Formation and Charge Separation in Organic Solar Cells
- 2021
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- We are currently living in the era of automation and artificial intelligence, which requires more energy than ever before. Meanwhile, the reduction of carbon footprint is needed for keeping the environment sustainable. Exploring green energy is crucial. Solar power is one of the green energy sources. The apparatus that converts solar energy to electricity is a solar cell. Organic solar cells (OSCs), employing organic materials absorbing solar radiation and converting to electricity have got extensive attention in the last decades due to their unique advantages like lightweight, semi-transparency, and potential industrialization. In most cases, an OSC composes of two different organic semiconductors as electron donor and acceptor to form a photoactive layer with a bulk heterojunction (BHJ) structure, and sandwiched between the electron and hole transport layers and then two electrodes. The morphology of the BHJ plays a crucial role in the device's performance, and it is a result of a complicated interplay between donor, acceptor, and solvent during the film drying from a solution. Thus, in-situ monitoring the film drying during solvent evaporation could deepen understanding of the mechanism of the morphology formation. A versatile multiple spectroscopic setup is assembled for this purpose, which can record laser scattering, steady-state photoluminescence (PL), time-resolved photoluminescence (TRPL), and white-light absorption during film formation. By comparing the drying dynamics of three different blend systems with their corresponding pristine films, we find that the blend film formation and its final morphology are more dominated by the component with a higher molecular weight. Different PL and TRPL quenching profiles between fullerene- and non-fullerene-based systems provide hints about different donor-acceptor interactions. Moreover, with the help of TRPL, the relative change of quantum yield during film formation can be calculated. Besides, this setup is also proved suitable for studying mechanisms behind device optimization processes, like the usage of solvent additives. One of the unique features of OSCs based on non-fullerene acceptors is the highly efficient hole transfer from the acceptor to the donor, sometimes even under zero or negative energetic offsets. However, in these cases the mechanism of hole transfer has not been fully understood. By studying hole transfer at the donor:acceptor interface in different material systems and device configurations, we highlight the role of electric field on the charge separation of OSCs when energetic offsets are not enough. To achieve better device performance, engineering the photoelectric properties of interfacial layers is equally essential. A good interfacial layer can facilitate carrier extraction and reduce carrier recombination. We demonstrate that adding MXenes into the PEDOT:PSS can increase the conductivity of this composite hole transport layer, without sacrificing its optical transparency and work function.
|
|
| 6. |
- Ma, Zaifei, 1986-
(författare)
-
Studies of Morphology and Charge-Transfer in Bulk-Heterojunction Polymer Solar Cells
- 2013
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The work presented in this thesis focuses on the two critical issues of bulk-heterojunction polymer solar cells: morphology of active layers and energy loss during charge transfer process at electron donor/acceptor interfaces. Both issues determine the performance of polymer solar cells through governing exciton dissociation, charge carrier recombination and free charge carrier transport.The morphology of active layers (spatial percolation of the donor and acceptor) is crucial for the performance of polymer solar cells due to the limited diffusion length of excitons in organic semiconductors (5-20 nm). Meanwhile, the trade-off between charge generation and transport also needs to be considered. On the one hand, a finely mixed morphology with a large donor/acceptor interface area is preferred for charge generation because efficient exciton dissociation only occurs at the interface, but on the other hand, proper phase separation is needed to reduce charge carrier recombination and facilitate free charge carrier transport to the electrodes. In this thesis, morphologies of the active layers based on different polymeric donors and fullerene acceptors are correlated to the performance of solar cells with various microscopic and spectroscopic techniques including atomic force microscope, transmission electron microscope, grazing incidence x-ray diffraction, photoluminescence, electroluminescence and Fourier transform photocurrent spectroscopy. Furthermore, methods to manipulate the morphologies of solution processed active layers to achieve high performance solar cells are also presented. Processing solvents, chemical structures of the donor and the acceptor materials, and substrate surface properties are found critically important in determining the nanoscale phase separation and performance of polymer solar cells.Optimizing morphology of active layers alone does not guarantee high performance devices. In addition to spatial percolation, energy arrangements of donors and acceptors are also essential due to contrary requests of the photocurrent and the photovoltage: Efficient exciton dissociation or charge transfer at donor/acceptor interfaces requires large enough energetic driving force, which is also known as energy loss for charge transfer. However, the energy loss due to charge transfer will unavoidably reduce the photovoltage. In this thesis the balance between the photocurrent and the photovoltage in polymer solar cells due to charge transfer at donor/acceptor interfaces is investigated for different active material systems. The driving force tuned by synthesizing series of polymers is determined by directly measuring the optical band gap via UV-Vis spectroscopy and probing the charge transfer recombination via electroluminescence measurements. Influences of driving force on the photocurrent and the photovoltage are characterized via field dependent photoluminescence and internal quantum efficiency measurements. The results correlated well with the performance of the solar cells.
|
|
| 7. |
- Qian, Deping
(författare)
-
Studies of Voltage Losses in Organic Solar Cells
- 2017
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Organic photovoltaic (OPV) devices based on semiconducting polymers and small molecules are potential alternatives to inorganic solar cells, owing to their advantages of being inexpensive, lightweight, flexible and suitable for roll-to-roll production. The state of art organic solar cells (OSCs) performed power conversion efficiencies (PCEs) over 13%.The quantum efficiency losses in OSCs have been significantly reduced within the charge generation and extraction processes, resulting in high EQEPV (70-90%) and high FF (70-80%). Whereas, large voltage losses (Δ? = ??/? − ???) were observed in conventional fullerene based solar cells, and it has been the main limiting factor for further OPV advancement. Therefore, strategies to reduce the voltage losses are required.In this thesis, newly designed non-fullerene (NF) acceptors are used to construct novel material systems for high efficiency solar cells. In particular, we studied the hole transfer in these fullerene free systems. We also reported a NF system that exhibit ultrafast and efficient charge separation despite a negligible driving force, as ECT is nearly identical to ??. Moreover, the small driving force is found to have minimal detrimental effects on charge transfer dynamics of the OSCs. We demonstrate a NF based OSC with efficiency of 9.5% and internal quantum efficiency nearly 90% despite a low voltage loss of 0.61 V. This creates a path towards highly efficient OSCs with a low voltage loss.CT states in OSCs are also investigated, since VOC is governed by the CT energy (ECT), which is found as ???? = ??? − 0.6 in a large set of fullerene based solar cells. In order to reduce these recombination losses from CT states, we explored polymer-diPDI systems which exhibited weakened D-A coupling strength, due to the steric hindrance effect. The radiative recombination losses at D/A interface in these NF devices are all reduced to less than 0.18 eV. In particular, in some cases, the additional emission from pure material is favorable for suppressing the non-radiative CT states decay. Consequently, the recombination losses in these NF systems are reduced to 0.5 eV, while the charge generation is still efficient as confirmed by PL quenching and EQEPV.Novel material systems based on non-fullerene acceptors are investigated. The systems performed energy offsets (ΔHOMO or ΔLUMO) less than 0.15eV, resulting in the same energy of CT states and bulk excitons. In this regard, the charge transfer energy loss is minimized. We also found that the EL spectra as well as the EQEEL of the blend solar cells are similar with that of lower gap components in blends. Thus the non-radiative voltage losses are reduced to < 0.3V and small voltage loss of 0.5-0.7V are obtained. Meanwhile, the charge generation in systems are still efficient and high EQEPV of 50-70% can be achieved. It confirms that there is no intrinsic limit for the VOC and efficiency of OPVs as compared with other photovoltaic technologies.
|
|
| 8. |
|
|
| 9. |
- Wang, Yuming, 1989-
(författare)
-
Voltage Losses in Non-fullerene Organic Solar Cells
- 2020
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Non-fullerene acceptors have significantly boosted the efficiencies of organic solar cells (OSCs) in the past few years. State-of-the-art OSCs have achieved a certificated power conversion efficiency of 17.4%. In spite of significant professes, there is still a gap between efficiencies of OSCs and those of traditional inorganic solar cells and emerging perovskite solar cells. One of the important reasons for this gap is the large voltage losses for OSCs. Understanding and reducing the voltage losses is of critical importance for further improving the performance of the OSCs. This thesis studies the voltage losses of OSCs based on non-fullerene acceptors.The charge transfer (CT) state plays a critical role in the open-circuit voltage (VOC) of the OSCs. According to the reciprocity relation between the electroluminescence (EL) and the external quantum efficiency of solar cells (EQEPV), we know that the sub-bandgap absorbance (responsible for large radiative recombination voltage losses) and the weak emission of CT states (responsible for large non-radiative voltage losses) are the reasons for large voltage losses in fullerene-based OSCs. In addition, the driving force, defined as the difference between the energy of the singlet states and CT states, was considered to be essential for efficient charge generation, especially when the OSC field was dominated by fullerene acceptors. A series of polymer: non-fullerene pairs with different driving forces were studied by spectroscopy methods e.g. Fourier-transfer photocurrent spectroscopy (FTPS) and electroluminescence spectroscopy. It was demonstrated that both radiative recombination voltage loss and the non-radiative energy loss can be suppressed by reducing driving forces, resulting in overall decreased voltage losses of the OSCs.Another question regarding the trade-off between the voltage losses and charge generation is still under debate – is the driving force essential for the efficient charge separation? A novel polymer: non-fullerene system with negligible offsets between both the lowest unoccupied molecular orbital (LUMO) and the highest unoccupied molecular orbital (HOMO) of the donor and acceptor was studied. Although the driving force for the new system is small, it works efficiently. It implies that efficient charge generation can occur with negligible driving forces for both electrons and holes, suggesting that the high VOC and efficient charge generation can be achieved at the same time for non-fullerene OSCs.In addition to binary OSCs, the voltage losses in ternary OSCs are also studied in this thesis. It was found that the VOC of the ternary organic solar cells cannot be well interpreted by the widely used alloy or parallel model. The non-radiative voltage loss, which is not paid much attention in the two models, was found to play an important role in the tunable VOC of the ternary OSCs. We demonstrate that the non-radiative voltage losses in ternary OSCs is dependent on the radiative recombination rates and the energy levels of the CT states of the two constituting binary OSCs. Furthermore, the aggregation of the individual components can be decreased by adding the third component, suppressing the aggregation caused quenching and leading to a reduced non-radiative recombination voltage loss.The non-fullerene based OSCs with small voltage losses show great potential for indoor applications. Although it might be difficult for OSCs to compete with commercial silicon solar cells for harvesting the solar energy, we demonstrate highly efficient and stable non-fullerene OSCs under indoor light, providing a unique application possibility where OSCs can out-compete other photovoltaic technologies. For the indoor application, the OSCs takes advantage of the easily tunable absorption range of the organic semiconductors, and avoids their drawbacks of the instability under strong outdoor light containing ultraviolet light.
|
|
| 10. |
- Yang, Lei, 1985-
(författare)
-
Hole Transport Materials for Solid-State Mesoscopic Solar Cells
- 2014
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The solid-state mesoscopic solar cells (sMSCs) have been developed as a promising alternative technology to the conventional photovoltaics. However, the device performance suffers from the low hole-mobilities and the incomplete pore filling of the hole transport materials (HTMs) into the mesoporous electrodes. A variety of HTMs and different preparation methods have been studied to overcome these limitations. There are two types of sMSCs included in this doctoral thesis, namely solid-state dye-sensitized solar cells (sDSCs) and organometallic halide perovskite based solar cells.Two different types of HTMs, namely the small molecule organic HTM spiro-OMeTAD and the conjugated polymer HTM P3HT, were compared in sDSCs. The photo-induced absorption spectroscopy (PIA) spectra and spectroelectrochemical data suggested that the dye-dye hole conduction occurs in the absence of HTM and appears to be of significant importance to the contribution of hole transport.The PIA measurements and transient absorption spectroscopy (TAS) indicated that the oxidized dye was efficiently regenerated by a small molecule organic HTM TPAA due to its excellent pore filling. The conducting polymer P3HT was employed as a co-HTM to transfer the holes away from TPAA to prohibit the charge carrier recombination and to improve the hole transport.An alternative small molecule organic HTM, MeO-TPD, was found to outperform spiro-OMeTAD in sDSCs due to its more efficient pore filling and higher hole-mobility. Moreover, an initial light soaking treatment was observed to significantly improve the device performance due to a mechanism of Li+ ion migration towards the TiO2 surface.In order to overcome the infiltration difficulty of conducting polymer HTMs, a state-of-the-art method to perform in-situ photoelectrochemical polymerization (PEP) in an aqueous micellar solution of bis-EDOT monomer was developed as an environmental-friendly alternative pathway with scale-up potential for constructing efficient sDSCs with polymer HTMs.Three different types of HTMs, namely DEH, spiro-OMeTAD and P3HT, were used to investigate the influence of HTMs on the charge recombination in CH3NH3PbI3 perovskite based sMSCs. The photovoltage decay measurements indicate that the electron lifetime (τn) of these devices decreases by one order of magnitude in the sequence τspiro-OMeTAD > τP3HT > τDEH.
|
|
