| 1. |
- Wang, Ergang, 1981, et al.
(författare)
-
An Easily Accessible Isoindigo-Based Polymer for High-Performance Polymer Solar Cells
- 2011
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 1520-5126 .- 0002-7863. ; 133:36, s. 14244-14247
-
Tidskriftsartikel (refereegranskat)abstract
- A new, low-band-gap alternating copolymer consisting of terthiophene and isoindigo has been designed and synthesized. Solar cells based on this polymer and PC(71)BM show a power conversion efficiency of 6.3%, which is a record for polymer solar cells based on a polymer with an optical band gap below 1.5 eV. This work demonstrates the great potential of isoindigo moieties as electron-deficient units for building donor-acceptor-type polymers for high-performance polymer solar cells.
|
|
| 2. |
- Wang, Ergang, 1981, et al.
(författare)
-
An isoindigo-based low band gap polymer for efficient polymer solar cells with high photo-voltage
- 2011
-
Ingår i: Chemical Communications. - : Royal Society of Chemistry (RSC). - 1364-548X .- 1359-7345. ; 47:17, s. 4908-4910
-
Tidskriftsartikel (refereegranskat)abstract
- A new low band gap polymer (E-g = 1.6 eV) with alternating thiophene and isoindigo units was synthesized and characterized. A PCE of 3.0% and high open-circuit voltage of 0.89 V were realized in polymer solar cells, which demonstrated the promise of isoindigo as an electron deficient unit in the design of donor-acceptor conjugated polymers for polymer solar cells.
|
|
| 3. |
- Bai, Sai, et al.
(författare)
-
Ethanedithiol Treatment of Solution-Processed ZnO Thin Films: Controlling the Intragap States of Electron Transporting Interlayers for Efficient and Stable Inverted Organic Photovoltaics
- 2015
-
Ingår i: Advanced Energy Materials. - : Wiley-VCH Verlag. - 1614-6832 .- 1614-6840. ; 5:5, s. 1401606-
-
Tidskriftsartikel (refereegranskat)abstract
- The surface defects of solution-processed ZnO films lead to various intragap states. When the solution-processed ZnO films are used as electron transport interlayers (ETLs) in inverted organic solar cells, the intragap states act as interfacial recombination centers for photogenerated charges and thereby degrade the device performance. Here, a simple passivation method based on ethanedithiol (EDT) treatment is demonstrated, which effectively removes the surface defects of the ZnO nanocrystal films by forming zinc ethanedithiolates. The passivation by EDT treatment modulates the intragap states of the ZnO films and introduces a new intragap band. When the EDT-treated ZnO nanocrystal films are used as ETLs in inverted organic solar cells, both the power conversion efficiency and stability of the devices are improved. The control studies show that the solar cells with EDT-treated ZnO films exhibit reduced charge recombination rates and enhanced charge extraction properties. These features are consistent with the fact that the modulation of the intragap states results in reduction of interfacial recombination as well as the improved charge selectivity and electron transport properties of the ETLs. It is further demonstrated that the EDT treatment-based passivation method can be extended to ZnO films deposited from sol-gel precursors.
|
|
| 4. |
- Du, Chun, et al.
(författare)
-
9-Alkylidene-9H-Fluorene-Containing Polymer for High-Efficiency Polymer Solar Cells
- 2011
-
Ingår i: Macromolecules. - : American Chemical Society. - 0024-9297 .- 1520-5835. ; 44:19, s. 7617-7624
-
Tidskriftsartikel (refereegranskat)abstract
- A novel donor-acceptor copolymer containing 9-alkylidene-9H-fluorene unit in the main chain, poly[9-(1-hexylheptylidene)-2,7-fluorene-alt-5, 5-(4,7-di-2-thienyl-5,6-dialkoxy-2,1,3-benzothiadiazole)] (PAFDTBT), has been synthesized and evaluated in bulk heterojunction polymer solar cells (BHJ PSCs). The polymer possesses a low band gap of 1.84 eV, a low-lying HOMO energy level (5.32 eV), and excellent solubility in common organic solvents. PSCs based on PAFDTBT and (6,6)-phenyl-C(71)-butyric add methyl ester (PC(71)BM) demonstrate a power conversion efficiency (PCE) of 6.2% with a high fill factor (FF) of 0.70, which indicates that 9-alkylidene-9H-fluorene can be a very useful building block for constructing narrow band gap conjugated polymers for high-efficiency BHJ PSCs.
|
|
| 5. |
- Gedefaw, Desta Antenehe, 1971, et al.
(författare)
-
Conjugated polymers with polar side chains in bulk heterojunction solar cell devices
- 2014
-
Ingår i: Polymer International. - : Wiley. - 1097-0126 .- 0959-8103. ; 63:1, s. 22-30
-
Tidskriftsartikel (refereegranskat)abstract
- Two polymers with polar side chains, namely poly[2,7-(9,9-dioctylfluorene)-alt-5,5-(5',8'-di-2-thienyl-(2',3'-bis(3''-(2-(2-methoxyethoxy)ethoxy)phenyl)quinoxaline))] (P1) and poly[2,7-(9,9-bis(2-(2-methoxyethoxy)ethyl)fluorene)-alt-5,5-(5',8'-di-2-thienyl-(2',3'-bis(3''-(2-(2-methoxyethoxy)-ethoxy)phenyl)quinoxaline))] (P2), were synthesized for solar cell application. A series of bulk heterojunction solar cells were systematically fabricated and characterized by varying the electron-acceptor materials, processing solvents and thickness of the active layer. The results show that P1, with a higher molecular weight and good film-forming properties, performed better. The best device showed an open circuit voltage of 0.87 V, a short circuit current of 6.81 mA cm(-2) and a power conversion efficiency of 2.74% with 1:4 polymer:[6,6]-phenyl-C71-butyric acid methyl ester (PCBM[70]) mixture using o-dichlorobenzene (o-DCB) as processing solvent. P2 on the other hand showed a poorer performance with chlorobenzene as processing solvent, but a much improved performance was obtained using o-DCB instead. Thus, an open circuit voltage of 0.80 V, short circuit current of 6.21 mA cm(-2) and an overall power conversion efficiency of 2.22% were recorded for a polymer:PCBM[70] mixing ratio of 1:4. This is presumably due to the improvement of the morphology of the active layer using o-DCB as processing solvent. (c) 2013 Society of Chemical Industry
|
|
| 6. |
- Gedefaw, Desta Antenehe, 1971, et al.
(författare)
-
Random polyfluorene co-polymers designed for a better optical absorption coverage of the visible region of the electromagnetic spectrum
- 2014
-
Ingår i: Bulletin of the Chemical Society of Ethiopia. - : African Journals Online (AJOL). - 1726-801X .- 1011-3924. ; 28:1, s. 121-130
-
Tidskriftsartikel (refereegranskat)abstract
- Two alternating polyfluorenes (APFO15-F8BT and APFO3-F8BT) with full absorption of the visible region of the electromagnetic radiation were designed and synthesized for bulk-heterojunction solar cell devices. The optical and electrochemical properties of the two polymers were studied. The two polymers exhibited strong absorption in the visible region with no significant valley over the visible region extending up to 650 nm. Deep HOMO and ideally situated LUMO energy levels were the characteristics of the two polymers as revealed from the square wave voltammogram study: desired properties for extracting high open circuit voltage and for a facile charge transfer to the acceptor component in devices to take place, respectively. Photovoltaic devices were fabricated by blending the two polymers with PCBM[70] and up to similar to 2% power conversion efficiency were obtained.
|
|
| 7. |
- Hou, Qiong, et al.
(författare)
-
A triphenylamine-based four-armed molecule for solution-processed organic solar cells with high photo-voltage
- 2013
-
Ingår i: JOURNAL OF MATERIALS CHEMISTRY A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 1:16, s. 4937-4940
-
Tidskriftsartikel (refereegranskat)abstract
- A new four-armed molecule Th-4(DTPAB) with a triphenylamine-benzothiadiazole-triphenylamine unit as the core and 4-hexylthiophene as arms was synthesized. Solution-processed organic solar cells based on blends of Th-4(DTPAB) and PC71BM demonstrate a power conversion efficiency of 3.18% with a high open circuit voltage of 0.96 V.
|
|
| 8. |
- Ma, Zaifei, et al.
(författare)
-
A Facile Method to Enhance Photovoltaic Performance of Benzodithiophene-Isoindigo Polymers by Inserting Bithiophene Spacer
- 2014
-
Ingår i: Advanced Energy Materials. - : Wiley. - 1614-6840 .- 1614-6832. ; 4:6, s. Art. no. 1301455-
-
Tidskriftsartikel (refereegranskat)abstract
- This study describes the synthesis and characterization of four polymers based on benzo[1,2-b:4,5-b']dithiophene (BDT) and isoindigo with zero, one, two, and three thiophene spacer groups. Results have demonstrated that the use of bithiophene as a spacer unit improves the geometry of the polymer chain, making it planar, and hence, potentially enhanced π- π stacking occurs. Due to favorable interaction of the polymer chains, enhanced absorption coefficient, and optimal morphology, PBDT-BTI, which possesses bithiophene as a spacer, revealed high current and fill factor leading to a power conversion efficiency of 7.3% in devices, making this polymer the best performing isoindigo-based material in polymer solar cells (PSCs). Also, PBDT-BTI could still maintain efficiency of over 6% with the active layer thickness of 270 nm, making it a potential candidate for a material in printed PSCs. These results demonstrate that the use of thiophene spacers in D-A polymers could be an important design strategy to produce high-performance PSCs.
|
|
| 9. |
- Ma, Zaifei, et al.
(författare)
-
Enhance performance of organic solar cells based on an isoindigo-based copolymer by balancing absorption and miscibility of electron acceptor
- 2011
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 99:14
-
Tidskriftsartikel (refereegranskat)abstract
- Superior absorption of PC(71)BM in visible region to that of PC(61)BM makes PC(71)BM a predominant acceptor for most high efficient polymer solar cells (PSCs). However, we will demonstrate that power conversion efficiencies (PCEs) of PSCs based on poly[N,N'-bis(2-hexyldecyl)isoindigo-6, 6'-diyl-alt-thiophene-2,5-diyl] (PTI-1) with PC(61)BM as acceptor are 50% higher than their PC71BM counterparts under illumination of AM1.5G. AFM images reveal different topographies of the blends between PTI-1:PC(61)BM and PTI-1:PC(71)BM, which suggests that acceptor's miscibility plays a more important role than absorption. The photocurrent of 9.1 mA/cm(2) is among the highest value in PSCs with a driving force for exciton dissociation less than 0.2 eV.
|
|
| 10. |
- Ma, Zaifei, et al.
(författare)
-
Influences of Surface Roughness of ZnO Electron Transport Layer on the Photovoltaic Performance of Organic Inverted Solar Cells
- 2012
-
Ingår i: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 116:46, s. 24462-24468
-
Tidskriftsartikel (refereegranskat)abstract
- Here, we demonstrate the correlation between the surface roughness of the ZnO interlayer used as an electron transporting interlayer (ETL) in organic inverted solar cells (ISCs) and the photovoltaic performance of the ISCs. Three different surfaces of the ZnO ETL are studied in ISCs with the polymer poly[2,3-bis-(3-octyloxyphenyl)-quinoxaline-5,8-diyl-alt-thiophene-2,5-d iyl] (TQ1) mixed with [6,6]-phenyl C71 butyric acid methyl ester (PC71BM) as the active layer. The results obtained from these ISCs show that power conversion efficiency increases from 2.7% to 3.9% when the root-mean-square roughness of the ZnO layer decreases from 48 to 1.9 nm. Moreover, it is found that the short-circuit current density is higher in the ISC based on the smoother ZnO interlayer, with a larger donor/acceptor (D/A) interfacial area in the active layer that facilitates exciton dissociation. The reduced effective interfacial area between the photoactive layer and the ZnO interlayer with decreased ZnO surface roughness leads to an observed improvement in both fill factor and open circuit voltage, which is ascribed to a reduced concentration of traps at the interface between the ZnO interlayer and the active layer.
|
|
