| 1. |
- Wang, Ergang, 1981, et al.
(författare)
-
An Easily Accessible Isoindigo-Based Polymer for High-Performance Polymer Solar Cells
- 2011
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 1520-5126 .- 0002-7863. ; 133:36, s. 14244-14247
-
Tidskriftsartikel (refereegranskat)abstract
- A new, low-band-gap alternating copolymer consisting of terthiophene and isoindigo has been designed and synthesized. Solar cells based on this polymer and PC(71)BM show a power conversion efficiency of 6.3%, which is a record for polymer solar cells based on a polymer with an optical band gap below 1.5 eV. This work demonstrates the great potential of isoindigo moieties as electron-deficient units for building donor-acceptor-type polymers for high-performance polymer solar cells.
|
|
| 2. |
- Gadisa, Abay, et al.
(författare)
-
Bipolar Charge Transport in Fullerene Molecules in a Bilayer and Blend of Polyfluorene Copolymer and Fullerene
- 2010
-
Ingår i: ADVANCED MATERIALS. - : Wiley. - 0935-9648. ; 22:9, s. 1008-
-
Tidskriftsartikel (refereegranskat)abstract
- Efficient polymer solar cells typically contain the fullerene derivative [6,6]-phenyl-C61-butyric acid methyl ester (PCBM), which promotes dissociation of excited states and enhances charge transport. The ability of PCBM to transport holes in solar cell bulk heterojunction films is monitored via the electroluminescence emission of a bulk heterojunction blend of PCBM and a polyfluorene copolymer. In polymer/fullerene bilayer diodes, fullerene emission is also observed.
|
|
| 3. |
- Ma, Zaifei, et al.
(författare)
-
Enhance performance of organic solar cells based on an isoindigo-based copolymer by balancing absorption and miscibility of electron acceptor
- 2011
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 99:14
-
Tidskriftsartikel (refereegranskat)abstract
- Superior absorption of PC(71)BM in visible region to that of PC(61)BM makes PC(71)BM a predominant acceptor for most high efficient polymer solar cells (PSCs). However, we will demonstrate that power conversion efficiencies (PCEs) of PSCs based on poly[N,N'-bis(2-hexyldecyl)isoindigo-6, 6'-diyl-alt-thiophene-2,5-diyl] (PTI-1) with PC(61)BM as acceptor are 50% higher than their PC71BM counterparts under illumination of AM1.5G. AFM images reveal different topographies of the blends between PTI-1:PC(61)BM and PTI-1:PC(71)BM, which suggests that acceptor's miscibility plays a more important role than absorption. The photocurrent of 9.1 mA/cm(2) is among the highest value in PSCs with a driving force for exciton dissociation less than 0.2 eV.
|
|
| 4. |
- Ma, Zaifei, et al.
(författare)
-
Structure-Property Relationships of Oligothiophene-Isoindigo Polymers for Efficient Bulk-Heterojunction Solar Cells
- 2014
-
Ingår i: energy and environmental science. - : Royal Society of Chemistry. - 1754-5692. ; 17:1, s. 361-369
-
Tidskriftsartikel (refereegranskat)abstract
- A series of alternating oligothiophene (nT)-isoindigo (I) copolymers (PnTI) were synthesized to investigate the influence of the oligothiophene block length on the photovoltaic (PV) properties of PnTI:PCBM bulk-heterojunction blends. Our study indicates that the number of thiophene rings (n) in the repeating unit alters both, polymer crystallinity and polymer-fullerene interfacial energetics, which results in a decreasing open-circuit voltage (Voc) of the solar cells with increasing n. The short-circuit current density (Jsc) of P1TI:PCBM devices is limited by the absence of a significant driving force for electron transfer. Instead, blends based on P5TI and P6TI feature large polymer domains, which limit charge generation and thus Jsc. The best PV performance with a power conversion efficiency of up to 6.9% was achieved with devices based on P3TI, where a combination of favorable morphology and optimal interface energy level offset ensures efficient exciton separation and charge generation. The structure-property relationship demonstrated in this work is a valuable guideline for the design of high performance polymers with small energy losses during the charge generation process, allowing for the fabrication of efficient solar cells that combine a minimal loss in Voc with a high Jsc.
|
|
| 5. |
- Tang, Zheng, et al.
(författare)
-
Semi-Transparent Tandem Organic Solar Cells with 90% Internal Quantum Efficiency
- 2012
-
Ingår i: Advanced Energy Materials. - : Wiley. - 1614-6840 .- 1614-6832. ; 2:12, s. 1467-1476
-
Tidskriftsartikel (refereegranskat)abstract
- Semi-transparent (ST) organic solar cells with potential application as power generating windows are studied. The main challenge is to find proper transparent electrodes with desired electrical and optical properties. In this work, this is addressed by employing an amphiphilic conjugated polymer PFPA-1 modified ITO coated glass substrate as the ohmic electron-collecting cathode and PEDOT:PSS PH1000 as the hole-collecting anode. For active layers based on different donor polymers, considerably lower reflection and parasitic absorption are found in the ST solar cells as compared to solar cells in the standard geometry with an ITO/PEDOT:PSS anode and a LiF/Al cathode. The ST solar cells have remarkably high internal quantum efficiency at short circuit condition (similar to 90%) and high transmittance (similar to 50%). Hence, efficient ST tandem solar cells with enhanced power conversion efficiency (PCE) compared to a single ST solar cell can be constructed by connecting the stacked two ST sub-cells in parallel. The total loss of photons by reflection, parasitic absorption and transmission in the ST tandem solar cell can be smaller than the loss in a standard solar cell based on the same active materials. We demonstrate this by stacking five separately prepared ST cells on top of each other, to obtain a higher photocurrent than in an optimized standard solar cell.
|
|
| 6. |
- Tvingstedt, Kristofer, et al.
(författare)
-
Electroluminescence from Charge Transfer States in Polymer Solar Cells
- 2009
-
Ingår i: JOURNAL OF THE AMERICAN CHEMICAL SOCIETY. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 131:33, s. 11819-11824
-
Tidskriftsartikel (refereegranskat)abstract
- In this article we report the weak but omnipresent electroluminescence (EL) from several types of organic polymer:fullerene bulk heterojunction solar cells biased in the forward direction. The light emitted from blends of Some commonly used polymers and the fullerene molecule is significantly different from that of any of the pure materials comprising the blend. The lower energy of the blend EL is found to correlate with both the voltage onset of emission and the open-circuit voltage of the photovoltaic cell under solar illumination. WE., accordingly interpret the emission to originate from interfacial charge transfer state recombination and emphasize EL as a very valuable tool to characterize the charge transfer state present in donor/acceptor organic photovoltaic (OPV) cells.
|
|
| 7. |
- Tvingstedt, Kristofer, et al.
(författare)
-
On the Dissociation Efficiency of Charge Transfer Excitons and Frenkel Excitons in Organic Solar Cells: A Luminescence Quenching Study
- 2010
-
Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society. - 1932-7447 .- 1932-7455. ; 114:49, s. 21824-21832
-
Tidskriftsartikel (refereegranskat)abstract
- The field dependence of photocurrent found in many organic solar cells is a significant and detrimental setback for internal quantum efficiency. In this work we study the important contribution to this field dependence due to the dissociation efficiency of the weakly bound interfacial charge transfer (CT) state, crucial for organic bulk heterojunction solar cells. Three different donor polymers and two different acceptors are examined, and their respective dissociation characteristics are evaluated by photoluminescence (PL) quenching, both for Frenkel excitons and for the intermolecular charge transfer excitons. We observe that while the field-dependent photocurrent for pure polymers does correlate well with quenching efficiency, the CT exciton quenching from the blend generally displays a less pronounced correlation with extracted photocurrent. We further note that while the electroluminescence and photoluminescence of the pure polymer are identical, we observe a red shift for the blend electroluminescence. This indicates that lower energetic states, not visible in PL, are available in the blend. The emissive state of the blends probed by PL is therefore proposed to originate from sites that are involved in photocurrent generation to a lesser extent.
|
|
| 8. |
- Vandewal, Koen, et al.
(författare)
-
Quantification of Quantum Efficiency and Energy Losses in Low Bandgap Polymer:Fullerene Solar Cells with High Open-Circuit Voltage
- 2012
-
Ingår i: Advanced Functional Materials. - : Wiley-VCH Verlag Berlin. - 1616-301X .- 1616-3028. ; 22:16, s. 3480-3490
-
Tidskriftsartikel (refereegranskat)abstract
- In organic solar cells based on polymer:fullerene blends, energy is lost due to electron transfer from polymer to fullerene. Minimizing the difference between the energy of the polymer exciton (ED*) and the energy of the charge transfer state (ECT) will optimize the open-circuit voltage (Voc). In this work, this energy loss ED*-ECT is measured directly via Fourier-transform photocurrent spectroscopy and electroluminescence measurements. Polymer:fullerene photovoltaic devices comprising two different isoindigo containing polymers: P3TI and PTI-1, are studied. Even though the chemical structures and the optical gaps of P3TI and PTI-1 are similar (1.4 eV1.5 eV), the optimized photovoltaic devices show large differences in Voc and internal quantum efficiency (IQE). For P3TI:PC71BM blends a ED*-ECT of similar to 0.1 eV, a Voc of 0.7 V and an IQE of 87% are found. For PTI-1:PC61BM blends an absence of sub-gap charge transfer absorption and emission bands is found, indicating almost no energy loss in the electron transfer step. Hence a higher Voc of 0.92 V, but low IQE of 45% is obtained. Morphological studies and field dependent photoluminescence quenching indicate that the lower IQE for the PTI-1 system is not due to a too coarse morphology, but is related to interfacial energetics. Losses between ECT and qVoc due to radiative and non-radiative recombination are quantified for both material systems, indicating that for the PTI-1:PC61BM material system, Voc can only be increased by decreasing the non-radiative recombination pathways. This work demonstrates the possibility of obtaining modestly high IQE values for material systems with a small energy offset (andlt;0.1 eV) and a high Voc.
|
|
| 9. |
- Wang, Ergang, 1981, et al.
(författare)
-
Conformational Disorder Enhances Solubility and Photovoltaic Performance of a Thiophene–Quinoxaline Copolymer
- 2013
-
Ingår i: Advanced Energy Materials. - : Wiley. - 1614-6840 .- 1614-6832. ; 3:6, s. 806-814
-
Tidskriftsartikel (refereegranskat)abstract
- The side-chain architecture of alternating copolymers based on thiophene and quinoxaline (TQ) is found to strongly influence the solubility and photovoltaic performance. In particular, TQ polymers with different linear or branched alkyloxy-phenyl side chains on the quinoxaline unit are compared. Attaching the linear alkyloxy side-chain segment at the meta- instead of the para-position of the phenyl ring reduces the planarity of the backbone as well as the ability to order. However, the delocalisation across the backbone is not affected, which permits the design of high-performance TQ polymers that do not aggregate in solution. The use of branched meta-(2-ethylhexyl)oxy-phenyl side-chains results in a TQ polymer with an intermediate degree of order. The reduced tendency for aggregation of TQ polymers with linear meta-alkyloxy-phenyl persists in the solid state. As a result, it is possible to avoid the decrease in charge-transfer state energy that is observed for bulk-heterojunction blends of more ordered TQ polymers and fullerenes. The associated gain in open-circuit voltage of disordered TQ:fullerene solar cells, accompanied by a higher short-circuit current density, leads to a higher power conversion efficiency overall. Thus, in contrast to other donor polymers, for TQ polymers there is no need to compromise between solubility and photovoltaic performance.
|
|
| 10. |
- Zhang, Fengling, et al.
(författare)
-
Development of polymer-fullerene solar cells
- 2016
-
Ingår i: NATIONAL SCIENCE REVIEW. - : OXFORD UNIV PRESS. - 2095-5138 .- 2053-714X. ; 3:2, s. 222-239
-
Forskningsöversikt (refereegranskat)abstract
- Global efforts and synergetic interdisciplinary collaborations on solution-processed bulk-heterojunction polymer solar cells (PSCs or OPVs) made power conversion efficiencies over 10% possible. The rapid progress of the field is credited to the synthesis of a large number of novel polymers with specially tunable optoelectronic properties, a better control over the nano-morphology of photoactive blend layers, the introduction of various effective interfacial layers, new device architectures and a deeper understanding of device physics. We will review the pioneering materials for polymer-fullerene solar cells and trace the progress of concepts driving their development. We discuss the evolution of morphology control, interfacial layers and device structures fully exploring the potential of photoactive materials. In order to guide a further increase in power conversion efficiency of OPV, the current understanding of the process of free charge carrier generation and the origin of the photovoltage is summarized followed by a perspective on how to overcome the limitations for industrializing PSCs.
|
|
