| 1. |
|
|
| 2. |
- Abbafati, Cristiana, et al.
(author)
-
- 2020
-
Journal article (peer-reviewed)
|
|
| 3. |
|
|
| 4. |
- Qiu, Zhongzhu, et al.
(author)
-
Theoretical investigation of the energy performance of a novel MPCM (Microencapsulated Phase Change Material),slurry based PV/T module
- 2015
-
In: Energy. - : Elsevier BV. - 0360-5442 .- 1873-6785. ; 87, s. 686-698
-
Journal article (peer-reviewed)abstract
- Aim of the paper is to present a theoretical investigation into the energy performance of a novel PV/T module that employs the MPCM (Micro-encapsulated Phase Change Material) slurry as the working fluid. This involved (1) development of a dedicated mathematical model and computer program; (2) validation of the model by using the published data; (3) prediction of the energy performance of the MPCM (Microencapsulated Phase Change Material) slurry based PV/T module; and (4) investigation of the impacts of the slurry flow state, concentration ratio, Reynolds number and slurry serpentine size onto the energy performance of the PV/T module. It was found that the established model, based on the Hottel–Whillier assumption, is able to predict the energy performance of the MPCM slurry based PV/T system at a very good accuracy, with 0.3–0.4% difference compared to a validated model. Analyses of the simulation results indicated that laminar flow is not a favorite flow state in terms of the energy efficiency of the PV/T module. Instead, turbulent flow is a desired flow state that has potential to enhance the energy performance of PV/T module. Under the turbulent flow condition, increasing the slurry concentration ratio led to the reduced PV cells' temperature and increased thermal, electrical and overall efficiency of the PV/T module, as well as increased flow resistance. As a result, the net efficiency of the PV/T module reached the peak level at the concentration ratio of 5% at a specified Reynolds number of 3,350. Remaining all other parameters fixed, increasing the diameter of the serpentine piping led to the increased slurry mass flow rate, decreased PV cells' temperature and consequently, increased thermal, electrical, overall and net efficiencies of the PV/T module. In overall, the MPCM slurry based PV/T module is a new, highly efficient solar thermal and power configuration, which has potential to help reduce fossil fuel consumption and carbon emission to the environment.
|
|
| 5. |
- Shen, Jingchun, et al.
(author)
-
Characteristic study of a novel compact Solar Thermal Facade (STF) with internally extruded pin-fin flow channel for building integration
- 2016
-
In: Applied Energy. - : Elsevier BV. - 0306-2619 .- 1872-9118. ; 168, s. 48-64
-
Journal article (peer-reviewed)abstract
- The fully building integrated Solar Thermal Facade (STF) systems can become potential solutions for aesthetics architectural design, as well as for the enhancement of energy efficiency and reduction of operational cost in the contemporary built environment. As a result, this article introduces a novel compact STF with internally extruded pin–fin flow channel that is particularly suitable for the building integration. A dedicated simulation model was developed on basis of the heat transfer and the flow mechanics. A prototype of this STF was fabricated and then it was tested under a series of controlled environmental conditions. The experimental validation illustrated a good agreement with the simulation results, indicating the established model was able to predict the STF’s thermal performance at a reasonable accuracy (i.e. mean deviation of less than 5.46%). The impacts of several operational parameters, i.e. equivalent solar radiation, air temperature, air velocity, water mass flow rate and inlet water temperature, on the STF thermal performance were then discussed respectively. Given the baseline testing condition, the collector efficiency factor F′ is almost 0.9930, leading to a relatively high nominal thermal efficiency at about 63.21%, which demonstrates such STF, with simpler structure, lower cost and higher feasibility in architectural design, can achieve an equivalent or better thermal performance than recent bionic STF or the conventional ones. It is also concluded that the thermal efficiency varies proportionally with solar radiation, air temperature, and mass flow rate of water, but oppositely to air velocity and inlet water temperature. A sharp decreasing trend of this STF’s thermal efficiency against the (Tin − Ta)/I was observed under the given operational conditions, which indicates current STF design is only suitable for pool heating, domestic hot water and radiant space heating in areas/climates with warm ambient air temperature and sufficient solar radiation. The overall research results are beneficial for further design, optimization and application of such STF in various solar driven systems, including the provision of hot water, space heating/cooling, increased ventilation, or even electricity in buildings. Such STF technology has the potential to boost the building energy efficiency and literally turn the envelope into an independent energy plant, creating the possibility of solar-thermal technologies deployment in high-rise buildings.
|
|
| 6. |
- Shen, Jingchun, et al.
(author)
-
Conceptual development of a compact unglazed Solar Thermal Facade (STF) for building integration
- 2016
-
In: Energy Procedia. - : Elsevier BV. - 1876-6102. ; 96, s. 42-54
-
Journal article (peer-reviewed)abstract
- This research aims to develop an initiative modular unglazed Solar Thermal Facade (STF) concept initially for hot water generation to facilitate the integration of solar energy with buildings. The new STF concept is simple structure, low cost, and aesthetically appealing with easy installation but is expected to achieve the equivalent thermal efficiency as the conventional STFs. It delivered alternative design in terms of material, colour, texture, shape, size, architectural design, installation method, array connection, hypothetical system application, and solar coverage. Two common design variants i.e. (a) the STF cladding system and (b) the prefabricated STF wall system were described respectively for existing and new low-rise building typologies. Interaction of inclination, orientation, and insolation were discussed for the optimum STF position on the building. Four currently available methods for installation of such STF with buildings were summarized and three typical array connection methods were identified. The decentralized connection was recommended for different types of STF hot water systems. It is customary to design for a solar coverage of 50 to 60 percent for water heating in detached houses; in apartment buildings 30 to 40 percent are more commonly assumed. The concept design in this paper hereby illustrates the precedence for the hypothetical function by the creation of new ideas and also forms up the physical structure or operating principle for the investigations in near future.
|
|
| 7. |
|
|
| 8. |
- Shen, Jingchun, et al.
(author)
-
Design strategy of a compact unglazed solar thermal facade (STF) for building integration based on BIM concept
- 2017
-
In: Energy Procedia. - : Elsevier BV. - 1876-6102. ; 105, s. 1-6
-
Journal article (peer-reviewed)abstract
- This paper discusses the specific design strategy of a novel compact unglazed Solar Thermal Facade (STF) for building performance research in architectural practice. It identifies the basic role of such STF in the building performance simulation and analysis. A dedicated design strategy based on the BIM (building information modelling) concept for application of the proposed STF is then developed in details. This research work clarifies the necessary steps in ensuring that the environmental/economic factors and energy-efficiency strategies of the STF are integrated with the building design and analysis process at the early stage.
|
|
| 9. |
- Shen, Jingchun, et al.
(author)
-
Experimental study of a compact unglazed Solar Thermal Facade (STF) for energy-efficient buildings
- 2016
-
In: Energy Procedia. - : Elsevier BV. - 1876-6102. ; 104, s. 3-8
-
Journal article (peer-reviewed)abstract
- This paper presents a real-time experimental measurement of a novel compact unglazed solar thermal facade (STF) system at outdoor environment in Shanghai, China for about a whole summer week. It demonstrates the daily average solar thermal efficiency fluctuated from 40% to 45.5%. The overall result indicates the advantages of the STF with simple structure, low cost and high feasibility in architectural design for energy-efficient building application, especially at future district or city levels.
|
|
| 10. |
- Shen, Jingchun, et al.
(author)
-
Optimizing the configuration of a compact thermal facade module for solar renovation concept in buildings
- 2016
-
In: Energy Procedia. - : Elsevier BV. - 1876-6102. ; 104, s. 9-14
-
Journal article (peer-reviewed)abstract
- Solar concepts show potentially an improved cost-performance (energy) ratio when applied as the integrated parts of building renovations. This paper reported a compact solar thermal facade (STF) module with the internally extruded flow channel suiting for solar renovation concept in buildings. A few of impact factors were considered for the parametric study in order to optimize the STF's configuration for various applications through the validated simulation model. The overall research results are expected to be useful for further improvement in the thermal performance of solar renovation measures.
|
|
