| 1. |
- Zhang, Yong, 1982, et al.
(författare)
-
Improved Heat Spreading Performance of Functionalized Graphene in Microelectronic Device Application
- 2015
-
Ingår i: Advanced Functional Materials. - : Wiley. - 1616-3028 .- 1616-301X. ; 25:28, s. 4430-4435
-
Tidskriftsartikel (refereegranskat)abstract
- It is demonstrated that a graphene-based film (GBF) functionalized with silane molecules strongly enhances thermal performance. The resistance temperature detector results show that the inclusion of silane molecules doubles the heat spreading ability. Furthermore, molecular dynamics simulations show that the thermal conductivity () of the GBF increased by 15%-56% with respect to the number density of molecules compared to that with the nonfunctionalized graphene substrate. This increase in is attributed to the enhanced in-plane heat conduction of the GBF, resulting from the simultaneous increase of the thermal resistance between the GBF and the functionalized substrate limiting cross-plane phonon scattering. Enhancement of the thermal performance by inserting silane-functionalized molecules is important for the development of next-generation electronic devices and proposed application of GBFs for thermal management.
|
|
| 2. |
- Zhang, Yong, 1982, et al.
(författare)
-
Use of graphene-based films for hot spot cooling
- 2014
-
Ingår i: Proceedings of the 5th Electronics System-Integration Technology Conference, ESTC 2014. - 9781479940264 ; , s. Art. no. 6962834-
-
Konferensbidrag (refereegranskat)abstract
- Efficient heat dissipation is becoming an urgent demand in electronics and optoelectronics because of increasing power density, which is generating more heat than ever. Graphene, an atomic layer of carbon, has been shown to have high thermal conductivity, which makes this material a promising candidate for heat dissipation in electronics. Here, we demonstrate a new type of graphene-based film on a test platform to alleviate the thermal issues. Taking advantage of its high in-plane thermal conductivity, CVD-grown graphene has been observed to possess a strong heat-spreading ability. In this paper, a chemical conversion process, including chemical oxidation, exfoliation and reduction, is utilised to fabricate the graphene-based films. Additionally, functionalisation of the film was also performed to diminish the interface thermal resistance between the chip surface and the graphene-based films. Thermal characterisation showed a capacity for effective heat removal, which was indicated by the decrease in the hot spot temperature at the same power loading. In summary, this facile approach may technologically enable large-scale fabrication of graphene-based films for thermal management in high power density devices.
|
|
| 3. |
- Liu, Johan, 1960, et al.
(författare)
-
1. Thermal Characterization of Power Devices Using Graphene-based Film
- 2014
-
Ingår i: Proceedings - Electronic Components and Technology Conference. - 0569-5503. - 9781479924073 ; , s. 459 - 463
-
Konferensbidrag (refereegranskat)abstract
- Due to its atomic structure with sp2 hybrid orbitals and unique electronic properties, graphene has an extraordinarily high thermal conductivity which has been reported to be up to 5000 W/mK. As a consequence, the use of graphene-based materials for thermal management has been subject to substantial attention during recent years in both academia and industry. In this paper, the development of a new type of graphene-based thin film for heat dissipation in power devices is presented. The surface of the developed graphene based film is primarily composed of functionalized graphene oxide, that can be bonded chemically to the device surface and thus minimize the interface thermal resistance caused by surface roughness. A very high in-plane thermal conductivity with a maximum value of 1600 W/mK was detected by laser flash machine regarding to the graphene-based films. To investigate the structure of the graphene-based films, scanning electron microscopy (SEM) and raman spectroscopy were carried out. Finally, LED demonstrators were built to illustrate the thermal performance of graphene-based film and the functional layers. IR camera recorded a 5°C lower temperature of a LED demonstrator with SHT G1000 as the binding layer instead of a commercial thermal conductive adhesive.
|
|
