| 1. |
- Fenstermacher, M.E., et al.
(författare)
-
DIII-D research advancing the physics basis for optimizing the tokamak approach to fusion energy
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L-H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.
|
|
| 2. |
- Hartley, Philippa, et al.
(författare)
-
SKA Science Data Challenge 2: analysis and results
- 2023
-
Ingår i: Monthly Notices of the Royal Astronomical Society. - 0035-8711 .- 1365-2966. ; 523:2, s. 1967-1993
-
Tidskriftsartikel (refereegranskat)abstract
- The Square Kilometre Array Observatory (SKAO) will explore the radio sky to new depths in order to conduct transformational science. SKAO data products made available to astronomers will be correspondingly large and complex, requiring the application of advanced analysis techniques to extract key science findings. To this end, SKAO is conducting a series of Science Data Challenges, each designed to familiarize the scientific community with SKAO data and to drive the development of new analysis techniques. We present the results from Science Data Challenge 2 (SDC2), which invited participants to find and characterize 233 245 neutral hydrogen (H i) sources in a simulated data product representing a 2000 h SKA-Mid spectral line observation from redshifts 0.25-0.5. Through the generous support of eight international supercomputing facilities, participants were able to undertake the Challenge using dedicated computational resources. Alongside the main challenge, 'reproducibility awards' were made in recognition of those pipelines which demonstrated Open Science best practice. The Challenge saw over 100 participants develop a range of new and existing techniques, with results that highlight the strengths of multidisciplinary and collaborative effort. The winning strategy - which combined predictions from two independent machine learning techniques to yield a 20 per cent improvement in overall performance - underscores one of the main Challenge outcomes: that of method complementarity. It is likely that the combination of methods in a so-called ensemble approach will be key to exploiting very large astronomical data sets.
|
|
| 3. |
- Su, P., et al.
(författare)
-
Functional characterization of ent-copalyl diphosphate synthase, kaurene synthase and kaurene oxidase in the Salvia miltiorrhiza gibberellin biosynthetic pathway
- 2016
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322 .- 2045-2322. ; 6, s. 23057-
-
Tidskriftsartikel (refereegranskat)abstract
- Salvia miltiorrhiza Bunge is highly valued in traditional Chinese medicine for its roots and rhizomes. Its bioactive diterpenoid tanshinones have been reported to have many pharmaceutical activities, including antibacterial, anti-inflammatory, and anticancer properties. Previous studies found four different diterpenoid biosynthetic pathways from the universal diterpenoid precursor (E, E, E)-geranylgeranyl diphosphate (GGPP) in S. miltiorrhiza. Here, we describe the functional characterization of ent-copalyl diphosphate synthase (SmCPSent), kaurene synthase (SmKS) and kaurene oxidase (SmKO) in the gibberellin (GA) biosynthetic pathway. SmCPSent catalyzes the cyclization of GGPP to ent-copalyl diphosphate (ent-CPP), which is converted to ent-kaurene by SmKS. Then, SmKO catalyzes the three-step oxidation of ent-kaurene to ent-kaurenoic acid. Our results show that the fused enzyme SmKS-SmCPSent increases ent-kaurene production by several fold compared with separate expression of SmCPSent and SmKS in yeast strains. In this study, we clarify the GA biosynthetic pathway from GGPP to ent-kaurenoic acid and provide a foundation for further characterization of the subsequent enzymes involved in this pathway. These insights may allow for better growth and the improved accumulation of bioactive tanshinones in S. miltiorrhiza through the regulation of the expression of these genes during developmental processes.
|
|
| 4. |
|
|
| 5. |
- Wang, Shu Min, 1963, et al.
(författare)
-
A novel semiconductor compatible path for nano-graphene synthesis using CBr4 precursor and Ga catalyst
- 2014
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322 .- 2045-2322. ; 4
-
Tidskriftsartikel (refereegranskat)abstract
- We propose a novel semiconductor compatible path for nano-graphene synthesis using precursors containing C-Br bonding and liquid catalyst. The unique combination of CBr4 as precursor and Ga as catalyst leads to efficient C precipitation at a synthesis temperature of 200 degrees C or lower. The non-wetting nature of liquid Ga on tested substrates limits nano-scale graphene to form on Ga droplets and substrate surfaces at low synthesis temperatures of T = 400 degrees C. Good quality interface nano-graphene is demonstrated and the quality can be further improved by optimization of synthesis conditions and proper selection of substrate type and orientation. The proposed method provides a scalable and transfer-free route to synthesize graphene/semiconductor heterostructures, graphene quantum dots as well as patterned graphene nano-structures at a medium temperature range of 400-700 degrees C suitable for most important elementary and compound semiconductors.
|
|
| 6. |
- Annadi, A., et al.
(författare)
-
Anisotropic two-dimensional electron gas at the LaAlO3/SrTiO3 (110) interface
- 2013
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723 .- 2041-1723. ; 4
-
Tidskriftsartikel (refereegranskat)abstract
- The observation of a high-mobility two-dimensional electron gas between two insulating complex oxides, especially LaAlO3/SrTiO3, has enhanced the potential of oxides for electronics. The occurrence of this conductivity is believed to be driven by polarization discontinuity, leading to an electronic reconstruction. In this scenario, the crystal orientation has an important role and no conductivity would be expected, for example, for the interface between LaAlO3 and (110)-oriented SrTiO3, which should not have a polarization discontinuity. Here we report the observation of unexpected conductivity at the LaAlO3/SrTiO3 interface prepared on (110)-oriented SrTiO3, with a LaAlO3-layer thickness-dependent metal-insulator transition. Density functional theory calculation reveals that electronic reconstruction, and thus conductivity, is still possible at this (110) interface by considering the energetically favourable (110) interface structure, that is, buckled TiO2/LaO, in which the polarization discontinuity is still present. The conductivity was further found to be strongly anisotropic along the different crystallographic directions with potential for anisotropic superconductivity and magnetism, leading to possible new physics and applications.
|
|
| 7. |
- Burstein, R., et al.
(författare)
-
Mapping 123 million neonatal, infant and child deaths between 2000 and 2017
- 2019
-
Ingår i: Nature. - : Nature Publishing Group. - 0028-0836 .- 1476-4687. ; 574:7778, s. 353-358
-
Tidskriftsartikel (refereegranskat)abstract
- Since 2000, many countries have achieved considerable success in improving child survival, but localized progress remains unclear. To inform efforts towards United Nations Sustainable Development Goal 3.2—to end preventable child deaths by 2030—we need consistently estimated data at the subnational level regarding child mortality rates and trends. Here we quantified, for the period 2000–2017, the subnational variation in mortality rates and number of deaths of neonates, infants and children under 5 years of age within 99 low- and middle-income countries using a geostatistical survival model. We estimated that 32% of children under 5 in these countries lived in districts that had attained rates of 25 or fewer child deaths per 1,000 live births by 2017, and that 58% of child deaths between 2000 and 2017 in these countries could have been averted in the absence of geographical inequality. This study enables the identification of high-mortality clusters, patterns of progress and geographical inequalities to inform appropriate investments and implementations that will help to improve the health of all populations. © 2019, The Author(s).
|
|
| 8. |
- Chen, Q., et al.
(författare)
-
Highly Tensile-Strained Self-Assembled Ge Quantum Dots on InP Substrates for Integrated Light Sources
- 2021
-
Ingår i: ACS Applied Nano Materials. - : American Chemical Society (ACS). - 2574-0970. ; 4:1, s. 897-906
-
Tidskriftsartikel (refereegranskat)abstract
- Highly tensile-strained Ge quantum dots (TS-Ge-QDs) emitting structures with different size were successfully grown on InP substrates by molecular beam epitaxy. Dislocation-free TS-Ge-QDs were observed by transmission electron microscopy. Finite element modeling indicates a maximum tensile strain of 4.5% in the Ge QDs, which is much larger than the required strain to achieve direct band gap conversion of Ge based on theoretical prediction. Photoluminescence (PL) from a direct band-gap-like transition of TS-Ge-QDs with a peak energy of 0.796 eV was achieved and confirmed by the etch depth-dependent PL, temperature-dependent PL, and excitation-power-dependent PL. In addition, a strong defect-related peak of 1 eV was observed at room temperature. The band structure of the TS-Ge-QDs emitting structures was calculated to support the experimental results of PL spectra. Achieving PL from direct band-gap-like transitions of TS-Ge-QDs provides encouraging evidence of this promising highly tensile strained semiconductor-nanostructure-based platform for future photonics applications such as integrated light sources.
|
|
| 9. |
- Chen, Q, et al.
(författare)
-
Photoluminescence from tensile-strained Ge quantum dots
- 2016
-
Ingår i: The 2016 IEEE Summer Topical Meeting Series, SUM 2016, Newport Beach, USA, July 11th-13th, 2016. - 9781509019007 ; , s. 120-121
-
Konferensbidrag (refereegranskat)abstract
- It has been theoretically predicted that 1.9% biaxial tensile strain can convert Ge [1], which is compatible with Si CMOS technology, into a direct band-gap semiconductor, making it a candidate material for light sources on Si [2, 3]. Combining the advantage of tensile strain with quantum dot (QD), we proposed that tensile-strained QD is a new route toward light emission from Ge [4]. In this work, we chose In0.52Al0.48As, which is lattice matched to InP, as barrier layer and grew the structure by molecular beam epitaxy (MBE). Photoluminescence (PL) was successfully achieved at room temperature.
|
|
| 10. |
- Chen, Q., et al.
(författare)
-
Tuning the Optoelectronic Properties of Capped Tensile-strained Ge Quantum Dots by Lattice Mismatch
- 2018
-
Ingår i: Cailiao Daobao/Materials Review. - 1005-023X. ; 32:3, s. 1004-1009
-
Tidskriftsartikel (refereegranskat)abstract
- The optoelectronic properties of capped tensile-strained Ge quantum dot (QD) was studied with different lattice mismatch, which was formed by Ge and various substrate. The strain distribution of Ge QDs were simulated with the aid of finite element method (FEM) and the electronic structures of capped tensile-strained Ge QDs under such strain was calculated via deformation potential theory and effective mass approach (EMA). The size effect of Ge QDs was also considered. It was found that the capped QDs hold larger strain than the uncapped ones. In addition, the energy difference between Γ and L conduction valley reduced with the increase of the QD size and the lattice mismatch, thus converting the Ge QDs into the direct band gap material. The energy of the direct band gap decreased with the increase of the QDs' size. This work shows that the tensile-strained Ge QD is a promising light emission material for future optoelectronic applications such as lasers on Si.
|
|
