SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Zhang Yong) ;pers:(Boschloo Gerrit)"

Sökning: WFRF:(Zhang Yong) > Boschloo Gerrit

  • Resultat 1-9 av 9
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Tian, Lei, et al. (författare)
  • Solid state p-type dye sensitized NiO-dye-TiO2 core-shell solar cells
  • 2018
  • Ingår i: Chemical Communications. - : Royal Society of Chemistry (RSC). - 1359-7345 .- 1364-548X. ; 54:30, s. 3739-3742
  • Tidskriftsartikel (refereegranskat)abstract
    • Solid state p-type dye sensitized NiO-dye-TiO2 core-shell solar cells with an organic dye PB6 were successfully fabricated for the first time. With Al2O3 as an inner barrier layer, the recombination process between injected holes in NiO and injected electrons in TiO2 was significantly suppressed and the charge transport time was also improved.
  •  
2.
  • Cheng, Ming, et al. (författare)
  • Acceptor Donor Acceptor type ionic molecule materials for efficient perovskite solar cells and organic solar cells
  • 2016
  • Ingår i: Nano Energy. - : Elsevier BV. - 2211-2855. ; 30, s. 387-397
  • Tidskriftsartikel (refereegranskat)abstract
    • Perovskite solar cells (PSCs) have attracted significant interest and hole transporting materials (HTMs) play important roles in achieving high efficiency. Here, we report additive free ionic type HTMs that are based on 2-ethylhexyloxy substituted benzodithiophene (BDT) core unit. With the ionization of end-capping pyridine units, the hole mobility and conductivity of molecular materials are greatly improved. Applied in PSCs, ionic molecular material M7-TFSI exhibits the highest efficiency of 17.4% in the absence of additives [lithium bis(trifluor-omethanesulfonyl)imide and 4-tert-butylpyridine]. The high efficiency is attributed to a deep highest occupied molecular orbital (HOMO) energy level, high hole mobility and high conductivity of M7-TFSI. Moreover, due to the higher hydrophobicity of M7-TFSI, the corresponding PSCs showed better stability than that of Spiro-OMeTAD based ones. In addition, the strong absorption and suitable energy levels of materials (M6, M7-13r and M7-TFSI) also qualify them as donor materials in organic solar cells (OSCs) and the devices containing M7-TFSI as donor material displayed an efficiency of 6.9%.
  •  
3.
  • Cheng, Ming, et al. (författare)
  • Highly Efficient Integrated Perovskite Solar Cells Containing a Small Molecule-PC70BM Bulk Heterojunction Layer with an Extended Photovoltaic Response Up to 900 nm
  • 2016
  • Ingår i: Chemistry of Materials. - : American Chemical Society (ACS). - 0897-4756 .- 1520-5002. ; 28:23, s. 8631-8639
  • Tidskriftsartikel (refereegranskat)abstract
    • We demonstrate a high efficiency perovskite solar cell (PSC) integrated with a bulk heterojunction layer, based on acceptor-donor-acceptor (A-D-A) type hole transport material (HTM) and PC70BM composite, yielding improved photoresponse. Two A-D-A-structured hole transporting materials termed M3 and M4 were designed and synthesized. Applied as HTMs in PSCs, power conversion efficiencies (PCEs) of 14.8% and 12.3% were obtained with M3 and M4, respectively. The HTMs M3 and M4 show competitive absorption, but do not contribute to photocurrent, resulting in low current density. This issue was solved by mixing the HTMs with PC70BM to form a bulk heterojunction (BHJ) layer and integrating this layer into the PSC as hole transport layer (HTL). Through careful interface optimization, the (FAPbI(3))(0.85)(MAPbBr(3))(0.15)/HTM:PC70BM integrated devices showed improved efficiencies of 16.2% and 15.0%, respectively. More importantly, the incident-photon-to-current conversion efficiency (IPCE) spectrum shows that the photoresponse is extended to 900 nm by integrating the M4:PC70BM based BHJ and (FAPbI(3))(0.85)(MAPbBr(3))(0.15) layers.
  •  
4.
  • Hua, Yong, et al. (författare)
  • Facile synthesis of fluorene-based hole transport materials for highly efficient perovskite solar cells and solid-state dye-sensitized solar cells
  • 2016
  • Ingår i: Nano Energy. - : Elsevier. - 2211-2855 .- 2211-3282. ; 26, s. 108-113
  • Tidskriftsartikel (refereegranskat)abstract
    • Two novel low-cost fluorene-based hole transport materials (HTMs) HT1 and HT2 as alternatives to the expensive HTM Spiro-OMeTAD have been designed and synthesized for the application in perovskite solar cells (PSCs) and solid-state dye-sensitized solar cell (ssDSCs). The two HTMs were prepared through a facile two-step reaction from cheap starting material and with a total yield higher than 90%. These HTMs exhibit good solubility and charge-transport ability. PSCs based on HT2 achieved power conversion efficiency (PCE) of 18.04% under air conditions, which is comparable to that of the cell employing the commonly used Spiro-OMeTAD (18.27%), while HT1-based cell showed a slightly worse performance with a PCE of 17.18%. For ssDSCs, the HT2-based device yielded a PCE of 6.35%, which is also comparable to that of a cell fabricated based on Spiro-OMeTAD (6.36%). We found that the larger dimensional structure and molecular weight of HT2 enable better photovoltaic performance than that of the smaller one HT1. These results show that easily synthesized fluorene-based HTMs have great potential to replace the expensive Spiro-OMeTAD for both PSCs and ssDSCs.
  •  
5.
  •  
6.
  • Xu, Bo, et al. (författare)
  • Tailor-Making Low-Cost Spiro[fluorene-9,9′-xanthene]-Based 3D Oligomers for Perovskite Solar Cells
  • 2017
  • Ingår i: Chem. - : Elsevier. - 2451-9308 .- 2451-9294. ; 2:5, s. 676-687
  • Tidskriftsartikel (refereegranskat)abstract
    • The power-conversion efficiencies (PCEs) of perovskite solar cells (PSCs) have increased rapidly from about 4% to 22% during the past few years. One of the major challenges for further improvement of the efficiency of PSCs is the lack of sufficiently good hole transport materials (HTMs) to efficiently scavenge the photogenerated holes and aid the transport of the holes to the counter-electrode in the PSCs. In this study, we tailor-made two low-cost spiro[fluorene-9,9′-xanthene] (SFX)-based 3D oligomers, termed X54 and X55, by using a one-pot synthesis approach for PSCs. One of the HTMs, X55, gives a much deeper HOMO level and a higher hole mobility and conductivity than the state-of-the-art HTM, Spiro-OMeTAD. PSC devices based on X55 as the HTM show a very impressive PCE of 20.8% under 100 mW·cm−2 AM1.5G solar illumination, which is much higher than the PCE of the reference devices based on Spiro-OMeTAD (18.8%) and X54 (13.6%) under the same conditions.
  •  
7.
  •  
8.
  • Zhang, Jinbao, et al. (författare)
  • Incorporation of Counter Ions in Organic Molecules : New Strategy in Developing Dopant-Free Hole Transport Materials for Efficient Mixed-Ion Perovskite Solar Cells
  • 2017
  • Ingår i: Advanced Energy Materials. - : WILEY-V C H VERLAG GMBH. - 1614-6832 .- 1614-6840. ; 7:14
  • Tidskriftsartikel (refereegranskat)abstract
    • Hole transport matertial (HTM) as charge selective layer in perovskite solar cells (PSCs) plays an important role in achieving high power conversion efficiency (PCE). It is known that the dopants and additives are necessary in the HTM in order to improve the hole conductivity of the HTM as well as to obtain high efficiency in PSCs, but the additives can potentially induce device instability and poor device reproducibility. In this work a new strategy to design dopant-free HTMs has been presented by modifying the HTM to include charged moieties which are accompanied with counter ions. The device based on this ionic HTM X44 dos not need any additional doping and the device shows an impressive PCE of 16.2%. Detailed characterization suggests that the incorporated counter ions in X44 can significantly affect the hole conductivity and the homogeneity of the formed HTM thin film. The superior photovoltaic performance for X44 is attributed to both efficient hole transport and effective interfacial hole transfer in the solar cell device. This work provides important insights as regards the future design of new and efficient dopant free HTMs for photovotaics or other optoelectronic applications.
  •  
9.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-9 av 9

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy