| 1. |
- Qin, Haiying, et al.
(författare)
-
Direct biofuel low-temperature solid oxide fuel cells
- 2011
-
Ingår i: ENERGY & ENVIRONMENTAL SCIENCE. - : Royal Society of Chemistry (RSC). - 1754-5692 .- 1754-5706. ; 4:4, s. 1273-1276
-
Tidskriftsartikel (refereegranskat)abstract
- A low-temperature solid oxide fuel cell system was developed to use bioethanol and glycerol as fuels directly. This system achieved a maximum power density of 215 mW cm(-2) by using glycerol at 580 degrees C and produced a great impact on sustainable energy and the environment.
|
|
| 2. |
- Zhu, Bin, 1956-, et al.
(författare)
-
A new energy conversion technology joining electrochemical and physical principles
- 2012
-
Ingår i: RSC Advances. - 2046-2069. ; 2:12, s. 5066-5070
-
Tidskriftsartikel (refereegranskat)abstract
- We report a new energy conversion technology joining electrochemical and physical principles. This technology can realize the fuel cell function but built on a different scientific principle. The device consists of a single component which is a homogenous mixture of ceria composite with semiconducting materials, e.g. LiNiCuZn-based oxides. The test devices with hydrogen and air operation delivered a power density of 760mWcm(-2) at 550 degrees C. The device has demonstrated a multi-fuel flexibility and direct alcohol and biogas operations have delivered 300-500 mW cm(-2) at the same temperature. Device physics reveal a key principle similar to solar cells realizing the function based on an effective separation of electronic and ionic conductions and phases within the single-component. The component material multi-functionalities: ion and semi-conductions and bi-catalysis to H-2 or alcohol (methanol and ethanol) and air (O-2) enable this device realized as a fuel cell.
|
|
| 3. |
- Abbas, Ghazanfar, et al.
(författare)
-
Study of CuNiZnGdCe-Nanocomposite Anode for Low Temperature SOFC
- 2012
-
Ingår i: Nanoscience and Nanotechnology Letters. - : American Scientific Publishers. - 1941-4900 .- 1941-4919. ; 4:4, s. 389-393
-
Tidskriftsartikel (refereegranskat)abstract
- Composite electrodes of Cu0.16Ni0.27Zn0.37Ce0.16Gd0.04 (CNZGC) oxides have been successfully synthesized by solid state reaction method as anode material for low temperature solid oxide fuel cell (LTSOFC). These electrodes are characterized by XRD followed by sintering at various time periods and temperatures. Particle size of optimized composition was calculated 40-85 nm and sintered at 800 degrees C for 4 hours. Electrical conductivity of 4.14 S/cm was obtained at a temperature of 550 degrees C by the 4-prob DC method. The activation energy was calculated 4 x 10(-2) eV at 550 degrees C. Hydrogen was used as fuel and air as oxidant at anode and cathode sides respectively. I-V/I-P curves were obtained in the temperature range of 400-550 degrees C. The maximum power density was achieved for 570 mW/cm(2) at 550 degrees C.
|
|
| 4. |
- Fan, Liangdong, et al.
(författare)
-
Electrochemical study of lithiated transition metal oxide composite as symmetrical electrode for low temperature ceramic fuel cells
- 2013
-
Ingår i: International journal of hydrogen energy. - : Elsevier BV. - 0360-3199 .- 1879-3487. ; 38:26, s. 11398-11405
-
Tidskriftsartikel (refereegranskat)abstract
- In this work, Lithiated NiCuZnOx (LNCZO) composite is synthesized and evaluated as a potential symmetrical electrode for ceria-carbonate composite electrolyte based low temperature ceramic fuel cells. Its crystal structures, the hydrogen oxidation/oxygen reduction electrochemical activities and fuel cell performances are systematically examined on the symmetrical cell configuration. Nano crystallite particles in the form of composite are observed for these oxides. The LNCZO shows relatively high catalytic activities for hydrogen oxidation and oxygen reduction reaction according to the electrochemical impedance spectroscopy measurements. A remarkable low oxygen reduction activation energy of 42 kJ mol(-1) is obtained on the LNCZO/ceria-carbonate composite, demonstrating excellent electro-catalytic activity. Especially, the catalytic activity can be further improved in the presence of water in the cathode chamber. The results show that the lithiated transition metal oxide composite is a promising symmetrical electrode for ceria-carbonate electrolyte and composite approach might a probable solution to develop super-performance electrodes for reduced temperature ceramic fuel cells.
|
|
| 5. |
- Fan, Liangdong, et al.
(författare)
-
Mixed ion and electron conductive composites for single component fuel cells : I. Effects of composition and pellet thickness
- 2012
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753 .- 1873-2755. ; 217, s. 164-169
-
Tidskriftsartikel (refereegranskat)abstract
- Electrochemical performances of single component fuel cells (SCFCs) based on mixed ion and electron conductors have been studied as a function of composition and pellet thickness by polarization curves and electrochemical impedance spectroscopy. The electronic conductor of LNCZO shows conductivities of 21.7 and 5.3 S cm(-1) in H-2 and in air, respectively. SCFC using 40 wt. % of LNCZO and 60 wt. % of ion conductive SDC-Na2CO3 with a thickness of 1.10 mm shows the highest power density of 0.35 W cm(-2) at 550 degrees C. The performance is correlated to the mixed conduction properties (ionic and electronic, p and n-type) and the microstructure of the functional SCFC layer.
|
|
| 6. |
- Fan, Liangdong, et al.
(författare)
-
Understanding the electrochemical mechanism of the core-shell ceria-LiZnO nanocomposite in a low temperature solid oxide fuel cell
- 2014
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 2:15, s. 5399-5407
-
Tidskriftsartikel (refereegranskat)abstract
- Ceria based solid solutions have been considered some of the best candidates to develop intermediate/low temperature solid oxide fuel cells (IT/LT-SOFCs, 600-800 degrees C). However, the barrier to commercialization has not been overcome even after numerous research activities due to its inherent electronic conduction in a reducing atmosphere and inadequate ionic conductivity at low temperatures. The present work reports a new type of all-oxide nanocomposite electrolyte material based on a semiconductor, Li-doped ZnO (LixZnO), and an ionic conductor, samarium doped ceria (SDC). This electrolyte exhibits superionic conductivity (>0.1 S cm(-1) over 300 degrees C), net-electron free and excellent electrolytic performances (400-630 mW cm(-2)) between 480 and 550 degrees C. Particularly, defects related to interfacial conduction and the intrinsic and extrinsic properties of ions are analysed. An internal or interfacial redox process on two-phase particles is suggested as a powerful methodology to overcome the internal short-circuit problem of ceria-based single phase materials and to develop new advanced materials for energy related applications. The combination of the above promising features makes the SDC-LiZnO nanocomposite a promising electrolyte for LTSOFCs.
|
|
| 7. |
- He, Yunjuan, et al.
(författare)
-
Cobalt oxides coated commercial Ba0.5Sr0.5Co0.8Fe0.2O3-delta as high performance cathode for low-temperature SOFCs
- 2016
-
Ingår i: Electrochimica Acta. - : Elsevier. - 0013-4686 .- 1873-3859. ; 191, s. 223-229
-
Tidskriftsartikel (refereegranskat)abstract
- In order to improve the catalytic activity of commercial Ba0.5Sr0.5Co0.8Fe0.2O3-delta (BSCF) for low-temperature solid oxide fuel cells (LTSOFC) (300-600 degrees C), CoOx has been used to modify the commercial BSCF through a solution coating approach. Phase and morphology of samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and energy-dispersive spectrometry (EDS), respectively. BSCF with 10 wt% CoOx exhibited an improved conductivity of 44 S/cm, and achieved a peak power density of 463 mW/cm(2) at 550 degrees C for LTSOFC, which is a 100% enhancement than that with the BSCF cathode. The cathode oxygen reduction reaction (ORR) promoted by CoOx and enhanced device performance mechanism have been proposed. This work provides a new way for the exploitation of high effective cathode materials for LTSOFCs.
|
|
| 8. |
- Jing, Yifu, et al.
(författare)
-
Synthesis and electrochemical performances of linicuzn oxides as anode and cathode catalyst for low temperature solid oxide fuel cell
- 2012
-
Ingår i: Journal of Nanoscience and Nanotechnology. - : American Scientific Publishers. - 1533-4880 .- 1533-4899. ; 12:6, s. 5102-5105
-
Tidskriftsartikel (refereegranskat)abstract
- Low temperature solid oxide fuel cell (LTSOFC, 300-600 °C) is developed with advantages compared to conventional SOFC (800-1000 °C). The electrodes with good catalytic activity, high electronic and ionic conductivity are required to achieve high power output. In this work, a LiNiCuZn oxides as anode and cathode catalyst is prepared by slurry method. The structure and morphology of the prepared LiNiCuZn oxides are characterized by X-ray diffraction and field emission scanning electron microscopy. The LiNiCuZn oxides prepared by slurry method are nano Li 0.28Ni 0.72O, ZnO and CuO compound. The nano-crystallites are congregated to form ball-shape particles with diameter of 800-1000 nm. The LiNiCuZn oxides electrodes exhibits high ion conductivity and low polarization resistance to hydrogen oxidation reaction and oxygen reduction reaction at low temperature. The LTSOFC using the LiNiCuZn oxides electrodes demonstrates good cell performance of 1000 mW cm -2 when it operates at 470 °C. It is considered that nano-composite would be an effective way to develop catalyst for LTSOFC.
|
|
| 9. |
- Liu, Liang, et al.
(författare)
-
The composite electrolyte with an insulation Sm2O3 and semiconductor NiO for advanced fuel cells
- 2018
-
Ingår i: International journal of hydrogen energy. - : Elsevier. - 0360-3199 .- 1879-3487. ; 43:28, s. 12739-12747
-
Tidskriftsartikel (refereegranskat)abstract
- Novel Sm2O3-NiO composite was prepared as the functional electrolyte for the first time. The total electrical conductivity of Sm2O3-NiO is 0.38 S cm(-1) in H-2/air condition at 550 degrees C. High performance, e.g. 718 mW cm(-2), was achieved using Sm2O3-NiO composite as an electrolyte of solid oxide fuel cells operated at 550 degrees C. The electrical properties and electrochemical performance are strongly depended on Sm2O3 and NiO constituent phase of the compositions. Notably, surprisingly high ionic conductivity and fuel cell performance are achieved using the composite system constituting with insulating Sm2O3 and intrinsic p-type conductive NiO with a low conductivity of 4 x 10(-3) S cm(-1). The interfacial ionic conduction between two phases is a dominating factor giving rise to significantly enhanced proton conduction. Fuel cell performance and further ionic conduction mechanisms are under investigation.
|
|
| 10. |
- Liu, Yanyan, et al.
(författare)
-
Flowerlike CeO2 microspheres coated with Sr2Fe1.5Mo0.5Ox nanoparticles for an advanced fuel cell
- 2015
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- Flowerlike CeO2 coated with Sr(2)Fe(1.5)Mo(0.5)Ox (Sr-Fe-Mo-oxide) nanoparticles exhibits enhanced conductivity at low temperatures (300-600 degrees C), e.g. 0.12 S cm(-1) at 600 degrees C, this is comparable to pure ceria (0.1 S cm(-1) at 800 degrees C). Advanced single layer fuel cell was constructed using the flowerlike CeO2/Sr-Fe-Mo-oxide layer attached to a Ni-foam layer coated with the conducting transition metal oxide. Such fuel cell has yielded a peak power density of 802 mWcm(-2) at 550 degrees C. The mechanism of enhanced conductivity and cell performance were analyzed. These results provide a promising strategy for developing advanced low-temperature SOFCs.
|
|
