| 1. |
- Sánchez Van Kammen, Mayte, et al.
(författare)
-
Characteristics and Outcomes of Patients with Cerebral Venous Sinus Thrombosis in SARS-CoV-2 Vaccine-Induced Immune Thrombotic Thrombocytopenia
- 2021
-
Ingår i: JAMA Neurology. - : American Medical Association. - 2168-6149 .- 2168-6157. ; 78:11, s. 1314-1323
-
Tidskriftsartikel (refereegranskat)abstract
- Importance: Thrombosis with thrombocytopenia syndrome (TTS) has been reported after vaccination with the SARS-CoV-2 vaccines ChAdOx1 nCov-19 (Oxford-AstraZeneca) and Ad26.COV2.S (Janssen/Johnson & Johnson).Objective: To describe the clinical characteristics and outcome of patients with cerebral venous sinus thrombosis (CVST) after SARS-CoV-2 vaccination with and without TTS.Design, Setting, and Participants: This cohort study used data from an international registry of consecutive patients with CVST within 28 days of SARS-CoV-2 vaccination included between March 29 and June 18, 2021, from 81 hospitals in 19 countries. For reference, data from patients with CVST between 2015 and 2018 were derived from an existing international registry. Clinical characteristics and mortality rate were described for adults with (1) CVST in the setting of SARS-CoV-2 vaccine-induced immune thrombotic thrombocytopenia, (2) CVST after SARS-CoV-2 vaccination not fulling criteria for TTS, and (3) CVST unrelated to SARS-CoV-2 vaccination.Exposures: Patients were classified as having TTS if they had new-onset thrombocytopenia without recent exposure to heparin, in accordance with the Brighton Collaboration interim criteria.Main Outcomes and Measures: Clinical characteristics and mortality rate.Results: Of 116 patients with postvaccination CVST, 78 (67.2%) had TTS, of whom 76 had been vaccinated with ChAdOx1 nCov-19; 38 (32.8%) had no indication of TTS. The control group included 207 patients with CVST before the COVID-19 pandemic. A total of 63 of 78 (81%), 30 of 38 (79%), and 145 of 207 (70.0%) patients, respectively, were female, and the mean (SD) age was 45 (14), 55 (20), and 42 (16) years, respectively. Concomitant thromboembolism occurred in 25 of 70 patients (36%) in the TTS group, 2 of 35 (6%) in the no TTS group, and 10 of 206 (4.9%) in the control group, and in-hospital mortality rates were 47% (36 of 76; 95% CI, 37-58), 5% (2 of 37; 95% CI, 1-18), and 3.9% (8 of 207; 95% CI, 2.0-7.4), respectively. The mortality rate was 61% (14 of 23) among patients in the TTS group diagnosed before the condition garnered attention in the scientific community and 42% (22 of 53) among patients diagnosed later.Conclusions and Relevance: In this cohort study of patients with CVST, a distinct clinical profile and high mortality rate was observed in patients meeting criteria for TTS after SARS-CoV-2 vaccination..
|
|
| 2. |
- Malapelle, Umberto, et al.
(författare)
-
Predictive molecular pathology in the time of coronavirus disease (COVID-19) in Europe
- 2021
-
Ingår i: Journal of Clinical Pathology. - : BMJ. - 0021-9746 .- 1472-4146. ; 74:6, s. 391-395
-
Tidskriftsartikel (refereegranskat)abstract
- Aims Lung cancer predictive biomarker testing is essential to select advanced-stage patients for targeted treatments and should be carried out without delays even during health emergencies, such as the coronavirus (COVID-19) outbreak. Methods Fifteen molecular laboratories from seven different European countries compared 4 weeks of national lockdown to a corresponding period in 2019, in terms of tissue and/or plasma-based molecular test workload, analytical platforms adopted, number of cases undergoing programmed death-ligand1 (PD-L1) expression assessment and DNA-based molecular tests turnaround time. Results In most laboratories (80.0%), tissue-based molecular test workload was reduced. In 40.0% of laboratories (6/15), the decrease was >25%, and in one, reduction was as high as 80.0%. In this instance, a concomitant increase in liquid biopsy was reported (60.0%). Remarkably, in 33.3% of the laboratories, real-time PCR (RT-PCR)-based methodologies increased, whereas highly multiplexing assays approaches decreased. Most laboratories (88.9%) did not report significant variations in PD-L1 volume testing. Conclusions The workload of molecular testing for patients with advanced-stage lung cancer during the lockdown showed little variations. Local strategies to overcome health emergency-related issues included the preference for RT-PCR tissue-based testing methodologies and, occasionally, for liquid biopsy.
|
|
| 3. |
- Backes, Claudia, et al.
(författare)
-
Production and processing of graphene and related materials
- 2020
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
| 4. |
- Biancari, Fausto, et al.
(författare)
-
Multicenter study on postcardiotomy venoarterial extracorporeal membrane oxygenation
- 2020
-
Ingår i: Journal of Thoracic and Cardiovascular Surgery. - : Elsevier BV. - 0022-5223 .- 1097-685X. ; 159:5, s. 1844-1854
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives: The aim of this study was to identify the risk factors associated with early mortality after postcardiotomy venoarterial extracorporeal membrane oxygenation. Methods: This is an analysis of the postcardiotomy extracorporeal membrane oxygenation registry, a retrospective multicenter cohort study including 781 patients aged more than 18 years who required venoarterial extracorporeal membrane oxygenation for cardiopulmonary failure after cardiac surgery from 2010 to 2018 at 19 cardiac surgery centers. Results: After a mean venoarterial extracorporeal membrane oxygenation therapy of 6.9 ± 6.2 days, hospital and 1-year mortality were 64.4% and 67.2%, respectively. Hospital mortality after venoarterial extracorporeal membrane oxygenation therapy for more than 7 days was 60.5% (P = .105). Centers that had treated more than 50 patients with postcardiotomy venoarterial extracorporeal membrane oxygenation had a significantly lower hospital mortality than lower-volume centers (60.7% vs 70.7%, adjusted odds ratio, 0.58; 95% confidence interval, 0.41-0.82). The postcardiotomy extracorporeal membrane oxygenation score was derived by assigning a weighted integer to each independent pre–venoarterial extracorporeal membrane oxygenation predictors of hospital mortality as follows: female gender (1 point), advanced age (60-69 years, 2 points; ≥70 years, 4 points), prior cardiac surgery (1 point), arterial lactate 6.0 mmol/L or greater before venoarterial extracorporeal membrane oxygenation (2 points), aortic arch surgery (4 points), and preoperative stroke/unconsciousness (5 points). The hospital mortality rates according to the postcardiotomy extracorporeal membrane oxygenation score was 0 point, 45.6%; 1 point, 40.5%; 2 points, 51.1%; 3 points, 57.8%; 4 points, 70.7%; 5 points, 68.3%; 6 points, 77.5%; and 7 points or more, 89.7% (P < .0001). Conclusions: Age, female gender, prior cardiac surgery, preoperative acute neurologic events, aortic arch surgery, and increased arterial lactate were associated with increased risk of early mortality after postcardiotomy venoarterial extracorporeal membrane oxygenation. Center experience with postcardiotomy venoarterial extracorporeal membrane oxygenation may contribute to improved results.
|
|
| 5. |
- Camen, Stephan, et al.
(författare)
-
Cardiac Troponin I and Incident Stroke in European Cohorts : Insights From the BiomarCaRE Project
- 2020
-
Ingår i: Stroke. - : Lippincott Williams & Wilkins. - 0039-2499 .- 1524-4628. ; 51:9, s. 2770-2777
-
Tidskriftsartikel (refereegranskat)abstract
- Background and Purpose: Stroke is a common cause of death and a leading cause of disability and morbidity. Stroke risk assessment remains a challenge, but circulating biomarkers may improve risk prediction. Controversial evidence is available on the predictive ability of troponin concentrations and the risk of stroke in the community. Furthermore, reports on the predictive value of troponin concentrations for different stroke subtypes are scarce.Methods: High-sensitivity cardiac troponin I (hsTnI) concentrations were assessed in 82 881 individuals (median age, 50.7 years; 49.7% men) free of stroke or myocardial infarction at baseline from 9 prospective European community cohorts. We used Cox proportional hazards regression to determine relative risks, followed by measures of discrimination and reclassification using 10-fold cross-validation to control for overoptimism. Follow-up was based upon linkage with national hospitalization registries and causes of death registries.Results: Over a median follow-up of 12.7 years, 3033 individuals were diagnosed with incident nonfatal or fatal stroke (n=1654 ischemic strokes, n=612 hemorrhagic strokes, and n=767 indeterminate strokes). In multivariable regression models, hsTnI concentrations were associated with overall stroke (hazard ratio per 1-SD increase, 1.15 [95% CI, 1.10-1.21]), ischemic stroke (hazard ratio, 1.14 [95% CI, 1.09-1.21]), and hemorrhagic stroke (hazard ratio, 1.10 [95% CI, 1.01-1.20]). Adding hsTnI concentrations to classical cardiovascular risk factors (C indices, 0.809, 0.840, and 0.736 for overall, ischemic, and hemorrhagic stroke, respectively) increased the C index significantly but modestly. In individuals with an intermediate 10-year risk (5%-20%), the net reclassification improvement for overall stroke was 0.038 (P=0.021).Conclusions: Elevated hsTnI concentrations are associated with an increased risk of incident stroke in the community, irrespective of stroke subtype. Adding hsTnI concentrations to classical risk factors only modestly improved estimation of 10-year risk of stroke in the overall cohort but might be of some value in individuals at an intermediate risk.
|
|
| 6. |
- Fushitani, Mizuho, et al.
(författare)
-
Time-resolved photoelectron imaging of complex resonances in molecular nitrogen
- 2021
-
Ingår i: The Journal of chemical physics. - : AIP Publishing. - 0021-9606 .- 1089-7690. ; 154:14
-
Tidskriftsartikel (refereegranskat)abstract
- We have used the FERMI free-electron laser to perform time-resolved photoelectron imaging experiments on a complex group of resonances near 15.38 eV in the absorption spectrum of molecular nitrogen, N2, under jet-cooled conditions. The new data complement and extend the earlier work of Fushitani et al. [Opt. Express 27, 19702–19711 (2019)], who recorded time-resolved photoelectron spectra for this same group of resonances. Time-dependent oscillations are observed in both the photoelectron yields and the photoelectron angular distributions, providing insight into the interactions among the resonant intermediate states. In addition, for most states, we observe an exponential decay of the photoelectron yield that depends on the ionic final state. This observation can be rationalized by the different lifetimes for the intermediate states contributing to a particular ionization channel. Although there are nine resonances within the group, we show that by detecting individual photoelectron final states and their angular dependence, we can identify and differentiate quantum pathways within this complex system.
|
|
| 7. |
|
|
| 8. |
- Martin, David, et al.
(författare)
-
Defining Major Surgery: A Delphi Consensus Among European Surgical Association (ESA) Members
- 2020
-
Ingår i: World Journal of Surgery. - : Springer Science and Business Media LLC. - 0364-2313 .- 1432-2323. ; 44:7, s. 2211-2219
-
Tidskriftsartikel (refereegranskat)abstract
- © 2020, Société Internationale de Chirurgie. Background: Major surgery is a term frequently used but poorly defined. The aim of the present study was to reach a consensus in the definition of major surgery within a panel of expert surgeons from the European Surgical Association (ESA). Methods: A 3-round Delphi process was performed. All ESA members were invited to participate in the expert panel. In round 1, experts were inquired by open- and closed-ended questions on potential criteria to define major surgery. Results were analyzed and presented back anonymously to the panel within next rounds. Closed-ended questions in round 2 and 3 were either binary or statements to be rated on a Likert scale ranging from 1 (strong disagreement) to 5 (strong agreement). Participants were sent 3 reminders at 2-week intervals for each round. 70% of agreement was considered to indicate consensus. Results: Out of 305 ESA members, 67 (22%) answered all the 3 rounds. Significant comorbidities were the only preoperative factor retained to define major surgery (78%). Vascular clampage or organ ischemia (92%), high intraoperative blood loss (90%), high noradrenalin requirements (77%), long operative time (73%) and perioperative blood transfusion (70%) were procedure-related factors that reached consensus. Regarding postoperative factors, systemic inflammatory response (76%) and the need for intensive or intermediate care (88%) reached consensus. Consequences of major surgery were high morbidity (>30% overall) and mortality (>2%). Conclusion: ESA experts defined major surgery according to extent and complexity of the procedure, its pathophysiological consequences and consecutive clinical outcomes.
|
|
| 9. |
- Nieto Peroy, Cristóbal, et al.
(författare)
-
A Concurrent Testing Facility Approach to Validate Small Satellite Combined Operations
- 2021
-
Ingår i: Aerospace. - : MDPI. - 2226-4310. ; 8:12
-
Tidskriftsartikel (refereegranskat)abstract
- Federated remote laboratories allow for the execution of experiments ex situ. The coordination of several laboratories can be used to perform concurrent experiments of combined space operations. However, the latency of the communications between facilities is critical to performing adequate real-time experiments. This paper presents an approach for conducting coordinated experiments between floating platforms at two remote laboratories. Two independently designed platforms, one at Luleå University of Technology and the other at La Sapienza University of Rome, were established for this purpose. A synchronization method based on the Simple Network Time Protocol was created, allowing the offset and delay between the agents to be measured.Both platforms exchange data about their measured time and pose through a UDP/IP protocol over the internet. This approach was validated with the execution of simulated operations. A first demonstrative experiment was also performed showing the possibility to realize leader/follower coordinated operations. The results of the simulations and experiments showed communication delays on the order of tens of milliseconds with no significant impact on the control performance. Consequently, the suggested protocol was proven to be adequate for conducting coordinated experiments in real time between remote laboratories.
|
|
| 10. |
- Nieto-Peroy, Cristóbal, et al.
(författare)
-
Simulation of Spacecraft Formation Maneuvers by means of Floating Platforms
- 2021
-
Ingår i: 2021 IEEE Aerospace Conference (50100). - : IEEE.
-
Konferensbidrag (refereegranskat)abstract
- This article provides a proposal case for studying simulations of spacecraft formation maneuvers in a Hardware-in-the-Loop Simulation Testbed specifically devoted to nanosatellites. The design specifications of the setup to perform such simulations are given, as well as the methods and results of the preliminary characterization of the floating platform to be used. The intent is to create a corpus of tests to find the dynamic behavior in a frictionless simulation as part of a concurrent decentralized simulation between the NanoSat Lab in Luleå University of Technology and the Guidance and Navigation Lab at La Sapienza.
|
|
