| 1. |
- Trunschke, Annette, et al.
(författare)
-
Towards Experimental Handbooks in Catalysis
- 2020
-
Ingår i: Topics in Catalysis. - : Springer Science and Business Media LLC. - 1572-9028 .- 1022-5528. ; 63:19-20, s. 1683-1699
-
Tidskriftsartikel (refereegranskat)abstract
- The “Seven Pillars” of oxidation catalysis proposed by Robert K. Grasselli represent an early example of phenomenological descriptors in the field of heterogeneous catalysis. Major advances in the theoretical description of catalytic reactions have been achieved in recent years and new catalysts are predicted today by using computational methods. To tackle the immense complexity of high-performance systems in reactions where selectivity is a major issue, analysis of scientific data by artificial intelligence and data science provides new opportunities for achieving improved understanding. Modern data analytics require data of highest quality and sufficient diversity. Existing data, however, frequently do not comply with these constraints. Therefore, new concepts of data generation and management are needed. Herein we present a basic approach in defining best practice procedures of measuring consistent data sets in heterogeneous catalysis using “handbooks”. Selective oxidation of short-chain alkanes over mixed metal oxide catalysts was selected as an example.
|
|
| 2. |
- Willner, Robin, et al.
(författare)
-
Potential and challenges of additive manufacturing for topology optimized spacecraft structures
- 2020
-
Ingår i: Journal of laser applications. - : American Institute of Physics (AIP). - 1042-346X .- 1938-1387. ; 32:3
-
Tidskriftsartikel (refereegranskat)abstract
- This study focused on the potential of topology optimization (TO) for metallic tertiary structures of spacecrafts produced by the additive manufacturing (AM) technique laser powder bed fusion. First, a screening of existing conventionally manufactured products was carried out to evaluate the benefits of a redesign concerning product performance and the associated economic impact. As a result of the study, the most suitable demonstrator was selected. This reference structure was redesigned by TO taking into consideration the AM process constraints. Another major aim of this work was to evaluate the possibilities and challenges of AM (accuracies, surface quality, process parameters, postmachining, and mechanical properties) in addition to the redesign process. A comprehensive approach was implemented including detailed analysis of the powder, mechanical properties, in-process parameters, and nondestructive inspection (NDI). All measured values were used for a back loop to the design process, thereby providing a final robust redesign. Finally, the fine-tuned demonstrator was built up in an iterative process. The parts were tested under representative conditions for the application to verify the performance. The demonstrator qualification test campaign contained thermal cycling, vibration testing, static load testing, and NDI. Thus, an improvement in technology readiness level up to "near flight qualified" was reached.
|
|
| 3. |
- Abbafati, Cristiana, et al.
(författare)
-
- 2020
-
Tidskriftsartikel (refereegranskat)
|
|
| 4. |
- Backes, Claudia, et al.
(författare)
-
Production and processing of graphene and related materials
- 2020
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
| 5. |
- Catalano, Calogerina, et al.
(författare)
-
Epistatic effect of TLR3 and cGAS-STING-IKKε-TBK1-IFN signaling variants on colorectal cancer risk
- 2020
-
Ingår i: Cancer Medicine. - : Wiley. - 2045-7634. ; 9:4, s. 1473-1484
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: The TLR3/cGAS-STING-IFN signaling has recently been reported to be disturbed in colorectal cancer due to deregulated expression of the genes involved. Our study aimed to investigate the influence of potential regulatory variants in these genes on the risk of sporadic colorectal cancer (CRC) in a Czech cohort of 1424 CRC patients and 1114 healthy controls. Methods: The variants in the TLR3, CGAS, TMEM173, IKBKE, and TBK1 genes were selected using various online bioinformatic tools, such as UCSC browser, HaploReg, Regulome DB, Gtex Portal, SIFT, PolyPhen2, and miRNA prediction tools. Results: Logistic regression analysis adjusted for age and sex detected a nominal association between CRC risk and three variants, CGAS rs72960018 (OR: 1.68, 95% CI: 1.11-2.53, P-value =.01), CGAS rs9352000 (OR: 2.02, 95% CI: 1.07-3.84, P-value =.03) and TMEM173 rs13153461 (OR: 1.53, 95% CI: 1.03-2.27, P-value =.03). Their cumulative effect revealed a threefold increased CRC risk in carriers of 5-6 risk alleles compared to those with 0-2 risk alleles. Epistatic interactions between these genes and the previously genotyped IFNAR1, IFNAR2, IFNA, IFNB, IFNK, IFNW, IRF3, and IRF7 genes, were computed to test their effect on CRC risk. Overall, we obtained nine pair-wise interactions within and between the CGAS, TMEM173, IKBKE, and TBK1 genes. Two of them remained statistically significant after Bonferroni correction. Additional 52 interactions were observed when IFN variants were added to the analysis. Conclusions: Our data suggest that epistatic interactions and a high number of risk alleles may play an important role in CRC carcinogenesis, offering novel biological understanding for the CRC management.
|
|
| 6. |
- Charmpilas, Nikolaos, et al.
(författare)
-
Acyl-CoA-binding protein (ACBP) : a phylogenetically conserved appetite stimulator
- 2020
-
Ingår i: Cell Death and Disease. - : Springer Science and Business Media LLC. - 2041-4889. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- Recently, we reported that, in mice, hunger causes the autophagy-dependent release of a protein called acyl-CoA-binding protein or diazepam binding inhibitor (ACBP/DBI) from cells, resulting in an increase in plasma ACBP concentrations. Administration of extra ACBP is orexigenic and obesogenic, while its neutralization is anorexigenic in mice, suggesting that ACBP is a major stimulator of appetite and lipo-anabolism. Accordingly, obese persons have higher circulating ACBP levels than lean individuals, and anorexia nervosa is associated with subnormal ACBP plasma concentrations. Here, we investigated whether ACBP might play a phylogenetically conserved role in appetite stimulation. We found that extracellular ACBP favors sporulation in Saccharomyces cerevisiae, knowing that sporulation is a strategy for yeast to seek new food sources. Moreover, in the nematode Caenorhabditis elegans, ACBP increased the ingestion of bacteria as well as the frequency pharyngeal pumping. These observations indicate that ACBP has a phylogenetically ancient role as a 'hunger factor' that favors food intake.
|
|
| 7. |
- Conlon, Thomas M, et al.
(författare)
-
Inhibition of LTβR signalling activates WNT-induced regeneration in lung
- 2020
-
Ingår i: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 588:7836, s. 151-156
-
Tidskriftsartikel (refereegranskat)abstract
- Lymphotoxin β-receptor (LTβR) signalling promotes lymphoid neogenesis and the development of tertiary lymphoid structures1,2, which are associated with severe chronic inflammatory diseases that span several organ systems3-6. How LTβR signalling drives chronic tissue damage particularly in the lung, the mechanism(s) that regulate this process, and whether LTβR blockade might be of therapeutic value have remained unclear. Here we demonstrate increased expression of LTβR ligands in adaptive and innate immune cells, enhanced non-canonical NF-κB signalling, and enriched LTβR target gene expression in lung epithelial cells from patients with smoking-associated chronic obstructive pulmonary disease (COPD) and from mice chronically exposed to cigarette smoke. Therapeutic inhibition of LTβR signalling in young and aged mice disrupted smoking-related inducible bronchus-associated lymphoid tissue, induced regeneration of lung tissue, and reverted airway fibrosis and systemic muscle wasting. Mechanistically, blockade of LTβR signalling dampened epithelial non-canonical activation of NF-κB, reduced TGFβ signalling in airways, and induced regeneration by preventing epithelial cell death and activating WNT/β-catenin signalling in alveolar epithelial progenitor cells. These findings suggest that inhibition of LTβR signalling represents a viable therapeutic option that combines prevention of tertiary lymphoid structures1 and inhibition of apoptosis with tissue-regenerative strategies.
|
|
| 8. |
- Gruber, Samira, et al.
(författare)
-
Comparison of dimensional accuracy and tolerances of powder bed based and nozzle based additive manufacturing processes
- 2020
-
Ingår i: Journal of laser applications. - : American Institute of Physics (AIP). - 1042-346X .- 1938-1387. ; 32:3
-
Tidskriftsartikel (refereegranskat)abstract
- Additive manufacturing processes have the potential to produce near-net shaped complex final parts in various industries such as aerospace, medicine, or automotive. Powder bed based and nozzle based processes like laser metal deposition (LMD), laser powder bed fusion (LPBF), and electron beam melting (EBM) are commercially available, but selecting the most suitable process for a specific application remains difficult and mainly depends on the individual know-how within a certain company. Factors such as the material used, part dimension, geometrical features, as well as tolerance requirements contribute to the overall manufacturing costs that need to be economically reasonable compared to conventional processes. Within this contribution, the quantitative analysis of basic geometrical features such as cylinders, thin walls, holes, and cooling channels of a special designed benchmark demonstrator manufactured by LMD; LPBF and EBM are presented to compare the geometrical accuracy within and between these processes to verify existing guidelines, connect the part quality to the process parameters, and demonstrate process-specific limitations. The fabricated specimens are investigated in a comprehensive manner with 3D laser scanning and CT scanning with regard to dimensional and geometrical accuracy of outer and inner features. The obtained results will be discussed and achievable as-built tolerances for assessed demonstrator parts will be classified according to general tolerance classes described [DIN ISO 2768-1,Allgemeintoleranzen-Teil 1: Toleranzen fur Langen- und Winkelmasse ohne einzelne Toleranzeintragung(1991). Accessed 26 February 2018; DIN ISO 2768-2,Allgemeintoleranzen-Teil 2: Toleranzen fur Form und Lage ohne einzelne Toleranzeintragung(1991). Accessed 26 February 2018].
|
|
| 9. |
- Haack, Maximilian, et al.
(författare)
-
Comprehensive study on the formation of grain boundary serrations in additively manufactured Haynes 230 alloy
- 2020
-
Ingår i: Materials Characterization. - : Elsevier. - 1044-5803 .- 1873-4189. ; 160
-
Tidskriftsartikel (refereegranskat)abstract
- Recently, grain boundary serrations have been introduced in conventionally processed Haynes 230 through a slow-cooling heat treatment. The aim of this work was to utilize these heat treatments to introduce serrations in additively manufactured (Laser Metal Deposition) Haynes 230. Contrary to expectations, serrations already formed during the fast-cooling of the Laser Metal Deposition process. Electron Backscatter Diffraction was used to elucidate the underlying phenomenon for the emergence of serrations during fast-cooling. As a result, a hypothesis regarding a new mechanism responsible for the formation of grain boundary serrations was formulated. Additionally, specific characteristics of the Laser Metal Deposition process have been identified. This includes a columnar-to-equiaxed transition (CET) for slower feed rates, leading to smaller grains despite lower cooling rates; the observation of an abrupt increase in grain growth for a raised solution annealing temperature; the fact that serrations hinder uncontrolled grain growth and finally that the LMD-process leads to a finer carbide morphology compared to conventional manufacturing methods, potentially leading to an increased precipitation strengthening effect.
|
|
| 10. |
- Kledwig, Christian, et al.
(författare)
-
A Study on the accuracy of Thermography-based Temperature measurement in Powder-fed directed energy deposition
- 2020
-
Ingår i: 20th CIRP Conference on Electro Physical and Chemical Machining. - : Elsevier. ; , s. 35-41
-
Konferensbidrag (refereegranskat)abstract
- Due to continuous development and increasingly deep understanding of the additive process, directed-energy deposition (DED) is becoming more and more interesting for industrial use. However, both the number of influencing factors and the process complexity, still require well-trained operators who can monitor and understand the machine tools. In order to facilitate the operators and to enable longer unattended processes, higher process safety, reliable monitoring systems and closed-loop controller are required. For example, despite a large number of investigations, the monitoring and control of the temperature distribution within the work piece still poses a big challenge.This study focusses on workpiece temperature measurement using a thermal imaging camera that observes the entire machining area. In order examine the measurement error caused by different viewing angles (φ = 0 … 75°), object temperatures (T = 333 … 1073K), surface conditions (welded and milled) and materials (316L, Inconel 718 and CuAl10) commonly used in DED, several approaches were followed using a thermal camera.It was found that surface condition and material cause the greatest measuring errors (up to +325K |−453K).). However, the measuring errors can be significantly reduced by suitable selection of the emissivity, so that it is possible to measure even the milled CuAl10 surface at a known viewing angle with a measuring error of +13.3% |−10.9%.
|
|
