| 1. |
- Belitsky, Victor, 1955, et al.
(författare)
-
ALMA Band 5 receiver cartridge: Design, performance, and commissioning
- 2018
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 611
-
Tidskriftsartikel (refereegranskat)abstract
- We describe the design, performance, and commissioning results for the new ALMA Band 5 receiver channel, 163-211 GHz, which is in the final stage of full deployment and expected to be available for observations in 2018. This manuscript provides the description of the new ALMA Band 5 receiver cartridge and serves as a reference for observers using the ALMA Band 5 receiver for observations. At the time of writing this paper, the ALMA Band 5 Production Consortium consisting of NOVA Instrumentation group, based in Groningen, NL, and GARD in Sweden have produced and delivered to ALMA Observatory over 60 receiver cartridges. All 60 cartridges fulfil the new more stringent specifications for Band 5 and demonstrate excellent noise temperatures, typically below 45 K single sideband (SSB) at 4 K detector physical temperature and below 35 K SSB at 3.5 K (typical for operation at the ALMA Frontend), providing the average sideband rejection better than 15 dB, and the integrated cross-polarization level better than -25 dB. The 70 warm cartridge assemblies, hosting Band 5 local oscillator and DC bias electronics, have been produced and delivered to ALMA by NRAO. The commissioning results confirm the excellent performance of the receivers.
|
|
| 2. |
- Belitsky, Victor, 1955, et al.
(författare)
-
SEPIA - A new single pixel receiver at the APEX telescope
- 2018
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 612
-
Tidskriftsartikel (refereegranskat)abstract
- Context. We describe the new Swedish-ESO PI Instrument for APEX (SEPIA) receiver, which was designed and built by the Group for Advanced Receiver Development (GARD), at Onsala Space Observatory (OSO) in collaboration with ESO. It was installed and commissioned at the APEX telescope during 2015 with an ALMA Band 5 receiver channel and updated with a new frequency channel (ALMA Band 9) in February 2016. Aim. This manuscript aims to provide, for observers who use the SEPIA receiver, a reference in terms of the hardware description, optics and performance as well as the commissioning results. Methods. Out of three available receiver cartridge positions in SEPIA, the two current frequency channels, corresponding to ALMA Band 5, the RF band 158-211 GHz, and Band 9, the RF band 600-722 GHz, provide state-of-the-art dual polarization receivers. The Band 5 frequency channel uses 2SB SIS mixers with an average SSB noise temperature around 45 K with IF (intermediate frequency) band 4-8 GHz for each sideband providing total 4 × 4 GHz IF band. The Band 9 frequency channel uses DSB SIS mixers with a noise temperature of 75-125 K with IF band 4-12 GHz for each polarization. Results. Both current SEPIA receiver channels are available to all APEX observers.
|
|
| 3. |
- Tan, B. K., et al.
(författare)
-
Investigation of the performance of an SIS mixer with Nb-AlN-NBN tunnel junctions in the 780-950 GHz frequency band
- 2018
-
Ingår i: 2018 29th IEEE International Symposium on Space Terahertz Technology, ISSTT 2018. ; , s. 139-142
-
Konferensbidrag (refereegranskat)abstract
- In this paper, we present preliminary measured performance of an SIS mixer employing a Nb/AIN/NbN tunnel junction in the frequency range of 780-950 GHz range. The mixer design is an upgrade of the Carbon Heterodyne Array of the Max-Planck-Institute Plus (CHAMP+) mixer, coupled with an easy to fabricate smooth-walled horn. The noise temperature of the mixer is measured using the standard Y-factor method, but all the RF optics is enclosed in the cryostat. We use a rotating mirror in the cryostat to switch between a room temperature load and a 4 K blackbody load. With this method, we have measured a noise temperature of 330 K around 850 GHz, corrected for a mismatch between a reduced height rectangular waveguide at the input of the mixer block and a full height waveguide at the output of the horn. To remove this mismatch we now plan to redesign a new mixer chip with a full-height waveguide back-piece. The expected performance of the new mixer chip is also reported.
|
|
