| 1. |
- Asplund, Maria, 1978-, et al.
(författare)
-
Composite biomolecule/PEDOT materials for neural electrodes
- 2008
-
Ingår i: Biointerphases. - NY : American Institute of Physics. - 1559-4106 .- 1934-8630. ; 3:3, s. 83-93
-
Tidskriftsartikel (refereegranskat)abstract
- Electrodes intended for neural communication must be designed to meet boththe electrochemical and biological requirements essential for long term functionality. Metallic electrode materials have been found inadequate to meet theserequirements and therefore conducting polymers for neural electrodes have emergedas a field of interest. One clear advantage with polymerelectrodes is the possibility to tailor the material to haveoptimal biomechanical and chemical properties for certain applications. To identifyand evaluate new materials for neural communication electrodes, three chargedbiomolecules, fibrinogen, hyaluronic acid (HA), and heparin are used ascounterions in the electrochemical polymerization of poly(3,4-ethylenedioxythiophene) (PEDOT). The resultingmaterial is evaluated electrochemically and the amount of exposed biomoleculeon the surface is quantified. PEDOT:biomolecule surfaces are also studiedwith static contact angle measurements as well as scanning electronmicroscopy and compared to surfaces of PEDOT electrochemically deposited withsurfactant counterion polystyrene sulphonate (PSS). Electrochemical measurements show that PEDOT:heparinand PEDOT:HA, both have the electrochemical properties required for neuralelectrodes, and PEDOT:heparin also compares well to PEDOT:PSS. PEDOT:fibrinogen isfound less suitable as neural electrode material.
|
|
| 2. |
- Asplund, Maria, 1978-
(författare)
-
Conjugated Polymers for Neural Interfaces : Prospects, possibilities and future challenges
- 2009
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Within the field of neuroprosthetics the possibility to use implanted electrodes for communication with the nervous system is explored. Much effort is put into the material aspects of the electrode implant to increase charge injection capacity, suppress foreign body response and build micro sized electrode arrays allowing close contact with neurons. Conducting polymers, in particular poly(3,4-ethylene dioxythiophene) (PEDOT), have been suggested as materials highly interesting for such neural communication electrodes. The possibility to tailor the material both mechanically and biochemically to suit specific applications, is a substantial benefit with polymers when compared to metals. PEDOT also have hybrid charge transfer properties, including both electronic and ionic conduction, which allow for highly efficient charge injection. Part of this thesis describes a method of tailoring PEDOT through exchanging the counter ion used in electropolymerisation process. Commonly used surfactants can thereby be excluded and instead, different biomolecules can be incorporated into the polymer. The electrochemical characteristics of the polymer film depend on the ion. PEDOT electropolymerised with heparin was here determined to have the most advantageous properties. In vitro methods were applied to confirm non-cytotoxicity of the formed PEDOT:biomolecular composites. In addition, biocompatibility was affirmed for PEDOT:heparin by evaluation of inflammatory response and neuron density when implanted in rodent cortex. One advantage with PEDOT often stated, is its high stability compared to other conducting polymers. A battery of tests simulating the biological environment was therefore applied to investigate this stability, and especially the influence of the incorporated heparin. These tests showed that there was a decline in the electroactivity of PEDOT over time. This also applied in phosphate buffered saline at body temperature and in the absence of other stressors. The time course of degradation also differed depending on whether the counter ion was the surfactant polystyrene sulphonate or heparin, with a slightly better stability for the former. One possibility with PEDOT, often overlooked for biological applications, is the use of its semi conducting properties in order to include logic functions in the implant. This thesis presents the concept of using PEDOT electrochemical transistors to construct textile electrode arrays with in-built multiplexing. Using the electrolyte mediated interaction between adjacent PEDOT coated fibres to switch the polymer coat between conducting and non conducting states, then transistor function can be included in the conducting textile. Analogue circuit simulations based on experimentally found transistor characteristics proved the feasibility of these textile arrays. Developments of better polymer coatings, electrolytes and encapsulation techniques for this technology, were also identified to be essential steps in order to make these devices truly useful. In summary, this work shows the potential of PEDOT to improve neural interfaces in several ways. Some weaknesses of the polymer and the polymer electronics are presented and this, together with the epidemiological data, should point in the direction for future studies within this field.
|
|
| 3. |
- Asplund, Maria, et al.
(författare)
-
Construction of wire electrodesand 3D woven logicas a potential technology forneuroprosthetic implants
- 2008
-
Ingår i: IEEE Transactions on Biomedical Engineering. - 0018-9294 .- 1558-2531.
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- New strategies to improve neuron coupling to neuroelectronic implants are needed. In particular, tomaintain functional coupling between implant and neurons, foreign body response like encapsulation must meminimized. Apart from modifying materials to mitigate encapsulation it has been shown that with extremely thinstructures, encapsulation will be less pronounced. We here utilize wire electrochemical transistors (WECTs) usingconducting polymer coated fibers. Monofilaments down to 10 μm can be successfully coated and weaved intocomplex networks with built in logic functions, so called textile logic. Such systems can control signal patterns at alarge number of electrode terminals from a few addressing fibres. Not only is fibre size in the range where lessencapsulation is expected but textiles are known to make successful implants because of their soft and flexiblemechanical properties. Further, textile fabrication provides versatility and even three dimensional networks arepossible. Three possible architectures for neuroelectronic systems are discussed. WECTs are sensitive to dehydrationand materials for better durability or improved encapsulation is needed for stable performance in biologicalenvironments.
|
|
| 4. |
|
|
| 5. |
- Asplund, M, et al.
(författare)
-
Toxicity evaluation of PEDOT/biomolecular composites intended for neural communication electrodes
- 2009
-
Ingår i: BIOMEDICAL MATERIALS. - : IOP Publishing. - 1748-6041 .- 1748-605X. ; 4:4, s. 045009-
-
Tidskriftsartikel (refereegranskat)abstract
- Electrodes coated with the conducting polymer poly(3,4-ethylene dioxythiophene) (PEDOT) possess attractive electrochemical properties for stimulation or recording in the nervous system. Biomolecules, added as counter ions in electropolymerization, could further improve the biomaterial properties, eliminating the need for surfactant counter ions in the process. Such PEDOT/biomolecular composites, using heparin or hyaluronic acid, have previously been investigated electrochemically. In the present study, their biocompatibility is evaluated. An agarose overlay assay using L929 fibroblasts, and elution and direct contact tests on human neuroblastoma SH-SY5Y cells are applied to investigate cytotoxicity in vitro. PEDOT: heparin was further evaluated in vivo through polymer-coated implants in rodent cortex. No cytotoxic response was seen to any of the PEDOT materials tested. The examination of cortical tissue exposed to polymer-coated implants showed extensive glial scarring irrespective of implant material (Pt:polymer or Pt). However, quantification of immunological response, through distance measurements from implant site to closest neuron and counting of ED1+ cell density around implant, was comparable to those of platinum controls. These results indicate that PEDOT: heparin surfaces were non-cytotoxic and show no marked difference in immunological response in cortical tissue compared to pure platinum controls.
|
|
| 6. |
- Cicortas Gunnarsson, Lavinia, et al.
(författare)
-
Evolution of a carbohydrate binding module into a protein-specific binder
- 2006
-
Ingår i: Biomolecular Engineering. - : Elsevier BV. - 1389-0344 .- 1878-559X. ; 23:2-3, s. 111-117
-
Tidskriftsartikel (refereegranskat)abstract
- A carbohydrate binding module, CBM4-2, derived front the xylanase (Xyn 10A) of Rhodothermus marinus has been used as a scaffold for molecular diversification. Its binding specificity has been evolved to recognise a quite different target, a human monoclonal IgG4. In order to understand the basis for this drastic change in specificity we have further investigated the target recognition of the IgG4-specific CBMs. Firstly, we defined that the structure target recognised by the selected CBM-variants was the protein and not the carbohydrates attached to the glycoprotein. We also identified key residues involved in the new specificity and/or responsible for the swap in specificity, from xylan to human IgG4. Specific changes present in all these CBMs included mutations not introduced in the design of the library from which the specific clones were selected. Reversion of such mutations led to a complete loss of binding to the target molecule, suggesting that they are critical for the recognition of human IgG4. Together with the mutations introduced at will, they had transformed the CBM scaffold into a protein binder. We have thus shown that the scaffold of CBM4-2 is able to harbour molecular recognition for either carbohydrate or protein structures. (c) 2005 Elsevier B.V. All rights reserved.
|
|
| 7. |
- Cicortas Gunnarsson, Lavinia, et al.
(författare)
-
Molecular engineering of a thermostable carbohydrate-binding module
- 2006
-
Ingår i: Biocatalysis and Biotransformation. - : Informa UK Limited. - 1029-2446 .- 1024-2422. ; 24:1-2, s. 31-37
-
Konferensbidrag (refereegranskat)abstract
- Structure-function studies are frequently practiced on the very diverse group of natural carbohydrate-binding modules in order to understand the target recognition of these proteins. We have taken a step further in the study of carbohydrate-binding modules and created variants with novel binding properties by molecular engineering of one such molecule of known 3D-structure. A combinatorial library was created from the sequence encoding a thermostable carbohydrate-binding module, CBM4-2 from a Rhodothermus marinus xylanase, and phage-display technology was successfully used for selection of variants with specificity towards different carbohydrate polymers (birchwood xylan, Avicel (TM), ivory nut mannan and recently also xyloglucan), as well as towards a glycoprotein (human IgG4). Our work not only generated a number of binders with properties that would suite a range of biotechnological applications, but analysis of selected binders also helped us to identify residues important for their specificities.
|
|
| 8. |
|
|
| 9. |
- de Maré, Lena, et al.
(författare)
-
A cultivation technique for E. coli fed-batch cultivations operating close to the maximum oxygen transfer capacity of the reactor
- 2005
-
Ingår i: Biotechnology Letters. - : Springer Science and Business Media LLC. - 0141-5492 .- 1573-6776. ; 27:14, s. 983-990
-
Tidskriftsartikel (refereegranskat)abstract
- A cultivation strategy combining the advantages of temperature-limited fed-batch and probing feeding control is presented. The technique was evaluated in fed-batch cultivations with E. coli BL21(DE3) producing xylanase in a 3 liter bioreactor. A 20% increase in cell mass was achieved and the usual decrease in specific enzyme activity normally observed during the late production phase was diminished with the new technique. The method was further tested by growing E. coli W3110 in a larger bioreactor (50 l). It is a suitable cultivation technique when the O2 transfer capacity of the reactor is reached and it is desired to continue to produce the recombinant protein.
|
|
| 10. |
|
|
