| 11. |
- Granström, Magnus, et al.
(författare)
-
Micrometer- and Nanometer-Sized Polymeric Light-Emitting Diodes
- 1995
-
Ingår i: Science. - : American Association for the Advancement of Science. - 0036-8075 .- 1095-9203. ; 267:5203, s. 1479-1481
-
Tidskriftsartikel (refereegranskat)abstract
- A method for the fabrication of micrometer- and submicrometer-sized polymeric light-emitting diodes is presented. Such diodes have a variety of applications. Light sources of dimensions around 100 nanometers are required for subwavelength, near-field optical microscopy. Another possible application is patterning on the micrometer and nanometer scale. The diodes have been made in the form of a sandwich structure, with the conductive polymer poly(3,4-ethylene-dioxythiophene) polymerized in the pores of commercially available microfiltration membranes defining the hole-injecting contacts, poly[3-(4-octylphenyl)-2,2-bithiophene] as the light-omitting layer, and a thin film of calcium-aluminum as the electron injector.
|
|
| 12. |
- Granström, Magnus, et al.
(författare)
-
Phase separation of conjugated polymers - Tools for new functions in polymer LEDs
- 1997
-
Ingår i: Synthetic metals. - : Elsevier. - 0379-6779 .- 1879-3290. ; 85:1-3, s. 1193-1194
-
Tidskriftsartikel (refereegranskat)abstract
- Within the single family of substituted poly(thiophenes) it is possible to realize such diverse device designs as voltage controlled colours from polymer LEDs, sub-micron size LEDs, and white light emitters. Many of these features become possible by the use of polymer blends in which one or more poly(thiophenes) are mixed with a matrix polymer (PMMA). The phase structure in these blends can be controlled by stoichiometry and mode of formation. That phase structure can be used to prevent exciton transfer, and to define new colours in polymer LEDs. It also allows us to make anisotropic conductors suitable for contacting optical devices.
|
|
| 13. |
- Granström, Magnus, et al.
(författare)
-
Polymeric light-emitting diodes of submicron size - Structures and developments
- 1996
-
Ingår i: Synthetic metals. - : Elsevier. - 0379-6779 .- 1879-3290. ; 76:1-3, s. 141-143
-
Tidskriftsartikel (refereegranskat)abstract
- Micron- and submicron-sized light-emitting diodes (LEDs) made using conjugated polymers as electroluminescent layers and contact materials are presented. Two different routes to make arrays of such small light sources have been developed. The benefits and drawbacks of the use of the conjugated polymer poly(2,3-ethylene-dioxythiophene) (PEDOT) as hole injector in polymer LEDs are also discussed.
|
|
| 14. |
- Granström, Magnus, et al.
(författare)
-
Self organizing polymer films - a route to novel electronic devices based on conjugated polymers
- 1997
-
Ingår i: Supramolecular science. - : ELSEVIER SCI LTD. - 0968-5677 .- 1873-4146. ; 4:1-2, s. 27-34
-
Tidskriftsartikel (refereegranskat)abstract
- Polymer blends are often used in polymer light emitting diodes as a tool to increase the efficiency of the devices. In this report, we show the necessity to take the phase separation properties of such blends into account, as the miscibility of the involved polymers drastically affects the resulting film structure. By using phase separated polymer blends involving conjugated poly(thiophenes) and different nonconjugated polymers as matrices, different types of applications, such as light emitting diodes with improved voltage control of emitted colour, sub-micron size LEDs and anisotropic conductors are demonstrated. (C) 1997 Elsevier Science Ltd. All rights reserved.
|
|
| 15. |
- Inganäs, Olle, et al.
(författare)
-
Optical emission from confined poly(thiophene) chains
- 1998
-
Ingår i: Optical materials (Amsterdam). - : Elsevier. - 0925-3467 .- 1873-1252. ; 9:1-4, s. 104-108
-
Tidskriftsartikel (refereegranskat)abstract
- We discuss the stages of the luminescence processes in substituted and soluble poly(thiophenes), using results from determinations of absolute quantum yields of photoluminescence, fast pump-probe experiments and microcavity devices. Enhancement of the quantum yield of photoluminescence, with poly(thiophenes) in the solid state, call be obtained by dispersing the conjugated chain in a molecularly dispersed polymer blend, or by adding side chains designed for forcing the conjugated main chains apart. At the wavelength of stimulated emission, we observe a narrow bandwidth emission in the high-Q one-dimensional microcavity devices prepared by sandwiching two dielectric mirrors around a thin polymer film, A strong enhancement of the power efficiency is observed at a pump power of 1 mu W/cm(2), but does not conclusively show lasing characteristics. (C) 1998 Elsevier Science B.V.
|
|
| 16. |
- Inganäs, Olle, et al.
(författare)
-
Thiophene polymers in light emitting diodes : Making multicolour devices
- 1995
-
Ingår i: Synthetic metals. - : Elsevier. - 0379-6779 .- 1879-3290. ; 71:1-3, s. 2121-2124
-
Tidskriftsartikel (refereegranskat)abstract
- We can control the bandgap of thiophene polymers over 2 eV by choosing the nature, position and regularity of side chain substitutions. Electroluminescence from these polymers cover the full visible spectrum, from the blue into the near infra-red. Blends of these polymer materials allow us to construct voltage controlled variable colour light sources. A newly developed transfer technique allow us to mount thin oriented films of the polymers in polymer LEDs to obtain polarised light sources giving polarisation anisotropys of up to 3. Sub-lambda light sources have been constructed from these polymer materials using nanometer polymer electrodes.
|
|
| 17. |
- Jager, Edwin, 1973-, et al.
(författare)
-
On-chip microelectrodes for electrochemistry with moveable PPy bilayer actuators as working electrodes
- 1999
-
Ingår i: Sensors and actuators. B, Chemical. - 0925-4005 .- 1873-3077. ; 56:1-2, s. 73-78
-
Tidskriftsartikel (refereegranskat)abstract
- We present electrochemical microactuators which have all the electrodes necessary for the actuation—the working, counter, and reference electrodes—on-chip. This is a first step towards an all-polymer system, i.e., a system that does not require a liquid electrolyte. The microactuators' performance was as good as when standard, off-chip counter and reference electrodes were used. Specifically, the speed of actuation was the same. In addition, we obtained a good cyclic voltammogram, although the oxidation and reduction peaks were shifted and some noise was present. Apart from application in an all-polymer system, we will also use these microactuators for studies on the effect of mechanical stimulation of living cells.
|
|
| 18. |
- Jager, Edwin, 1973-, et al.
(författare)
-
Polypyrrole micro actuators
- 1999
-
Ingår i: Synthetic metals. - 0379-6779 .- 1879-3290. ; 102:1-3, s. 1309-1310
-
Tidskriftsartikel (refereegranskat)abstract
- The doping and undoping of conjugated polymers is accompanied by a volume change. This volume change can be used to make micro-actuators. We have built polypyrrole (PPy) gold bilayer structures. The volume change of PPy induces a bending of the bilayer. We have made micro-actuators based on this principle, which have been examined with video-microscopy. Some applications for these microactuators are proposed, including opening and closing boxes for cell biology and nanoliter chemistry and micro-robotics.
|
|
| 19. |
- Roman, L.S., et al.
(författare)
-
Polymer diodes with high rectification
- 1999
-
Ingår i: Applied Physics Letters. - 0003-6951 .- 1077-3118. ; 75, s. 3557-3557
-
Tidskriftsartikel (refereegranskat)
|
|
| 20. |
- Xing, K. Z., et al.
(författare)
-
The electronic and geometric structures of neutral and potassium-doped poly[3-(4-octylphenyl)thiophene] studied by photoelectron spectroscopy
- 1996
-
Ingår i: Synthetic metals. - : Elsevier. - 0379-6779 .- 1879-3290. ; 76:1-3, s. 263-267
-
Tidskriftsartikel (refereegranskat)abstract
- The electronic and geometric structures of poly [3-(4-octylphenyl)thiophene] have been studied by X-ray and ultraviolet photoelectron spectroscopy (XPS and UPS, respectively). Thermochromic effects, and new charge induced states generated by potassium doping, have been observed by direct UPS measurements. The experimental results are in very good agreement with the results of theoretical quantum chemical calculations performed with the Austin Model 1 semi-empirical model and the valence-effective Hamiltonian pseudo-potential model.
|
|
