| 1. |
|
|
| 2. |
- Bråred Christensson, Johanna, 1965, et al.
(författare)
-
Air-oxidized linalool: a frequent cause of fragrance contact allergy.
- 2012
-
Ingår i: Contact Dermatitis. - : Wiley. - 0105-1873 .- 1600-0536. ; 67:5, s. 247-259
-
Tidskriftsartikel (refereegranskat)abstract
- Background. Linalool is a common fragrance terpene that, in pure form, is not allergenic or is a very weak allergen. However, linalool autoxidizes on air exposure, and the oxidation products can cause contact allergy. In a Swedish study, oxidized linalool 6.0% in petrolatum (pet.) gave 5% positive patch test reactions in 2500 dermatitis patients. Objectives. To investigate whether oxidized linalool 6%, with a stable concentration of the main haptens, the linalool hydroperoxides (Lin-OOHs) in pet., could be a useful tool for the detection of contact allergy in an international setting. Methods. Oxidized linalool 6.0% (Lin-OOHs 1%) pet. was tested in 2900 consecutive dermatitis patients in Denmark, the United Kingdom, Singapore, Spain, Sweden, and Australia. Results. Overall, 6.9% (range 3–13%) of the patients showed positive patch test reactions to oxidized linalool. Doubtful reactions were found in 9.2% of the patients (range 0–36%). Few irritant reactions were seen. Conclusions. In an international setting, oxidized linalool has been shown to be a common allergen. Oxidized linalool 6.0% (Lin-OOHs 1%) pet. is a useful, standardized and stable tool for the detection of contact allergy in dermatitis patients. Many patients showing positive patch test reactions to oxidized linalool would not have been informed of their fragrance allergy if this specific test had not been performed
|
|
| 3. |
- Bråred Christensson, Johanna, 1965, et al.
(författare)
-
Positive patch test reactions to oxidized limonene: exposure and relevance
- 2014
-
Ingår i: Contact Dermatitis. - : Wiley. - 0105-1873 .- 1600-0536. ; 71:5, s. 264-272
-
Tidskriftsartikel (refereegranskat)abstract
- Background. R-Limonene is a common fragrance terpene found in domestic and industrial products. R-Limonene autoxidizes on air exposure, and the oxidation products can cause contact allergy. In a recent multicentre study, 5.2% (range 2.3-12.1%) of 2900 patients showed a positive patch test reaction to oxidized R-limonene. Objective. To study the exposure to limonene among consecutive dermatitis patients reacting to oxidized R-limonene in an international setting, and to assess the relevance of the exposure for the patients' dermatitis. Methods. Oxidized R-limonene 3.0% (containing limonene hydroperoxides at 0.33%) in petrolatum was tested in 2900 consecutive dermatitis patients in Australia, Denmark, the United Kingdom, Singapore, Spain, and Sweden. A questionnaire assessing exposure to limonene-containing products was completed. Results. Overall, exposure to products containing limonene was found and assessed as being probably relevant for the patients' dermatitis in 36% of the limonene-allergic patients. In Barcelona and Copenhagen, >70% of the patients were judged to have had an exposure to limonene assessed as relevant. Conclusions. Oxidized R-limonene is a common fragrance allergen, and limonene was frequently found in the labelling on the patients' products, and assessed as relevant for the patients' dermatitis. A large number of domestic and occupational sources for contact with R-limonene were identified.
|
|
| 4. |
- Jakobsen, Stig S., et al.
(författare)
-
Failure of total hip implants : metals and metal release in 52 cases
- 2014
-
Ingår i: Contact Dermatitis. - : Wiley. - 0105-1873 .- 1600-0536. ; 71:6, s. 319-325
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundThe pathogenesis of total joint replacement failure is multifactorial. One hypothesis suggests that corrosion and wear of alloys result in metal ion release, which may then cause sensitization and even implant failure, owing to the acquired immune reactivity. ObjectivesTo assess cobalt, nickel and chromium(VI) release from, and the metal composition of, failed metal-on-ethylene total hip replacements. Materials/methodsImplant components from 52 revision cases were evaluated with spot tests for free nickel, cobalt, and chromium (VI) ions. Implant composition was determined with X-ray fluorescence spectroscopy, and information on the reason for revision and complications in relation to surgery was collected from the medical charts when possible (72%). For 10 implants, corrosion was further characterized with scanning electron microscopy. ResultsWe detected cobalt release from three of 38 removed femoral heads and from one of 24 femoral stems. Nickel release was detected from one of 24 femoral stems. No chromium(VI) release was detected. ConclusionsWe found that cobalt and nickel were released from some failed total hip arthroplasties, and corrosion was frequently observed. Metal ions and particles corroded from metal-on-polyethylene may play a role in the complex aetiopathology of implant failure.
|
|
| 5. |
- Morgardt-Ryberg, Kristina, et al.
(författare)
-
Patch testing with a textile dye mix - a multicentre study.
- 2014
-
Ingår i: Contact Dermatitis. - : Wiley. - 0105-1873. ; 71:4, s. 215-223
-
Tidskriftsartikel (refereegranskat)abstract
- Disperse dyes are well-known contact sensitizers. However, they are not included in the majority of commercially available baseline patch test series.
|
|
| 6. |
- Pontén, Ann, et al.
(författare)
-
Patch testing with 2.0% (0.60 mg/cm(2) ) formaldehyde instead of 1.0% (0.30 mg/cm(2) ) detects significantly more contact allergy.
- 2013
-
Ingår i: Contact Dermatitis. - : Wiley. - 0105-1873. ; 68:1, s. 50-53
-
Tidskriftsartikel (refereegranskat)abstract
- Background.The currently used patch test concentration for formaldehyde is 1.0% (wt/vol) in water. However, clinical experience and previous studies suggest that 1.0% might be insufficient for detecting an optimized number of clinically relevant cases of contact allergy to formaldehyde. Objectives.To validate earlier patch test results for comparison of 1% (wt/vol) and 2% (wt/vol) formaldehyde in water, and to investigate co-reactivity with quaternium-15. Materials and methods.In 12 dermatology clinics, 3591 patients were routinely patch tested simultaneously with 2.0% (wt/vol) (0.60 mg/cm(2) ) and 1.0% (wt/vol) (0.30 mg/cm(2) ) formaldehyde. Micropipettes were used for delivering the exact dosage of the allergen. Results.Significantly more patients reacted to 2.0% formaldehyde than to 1.0% (3.4% versus 1.8%, p < 0.001). Overall, there were no sex differences between those reacting positively to 2.0% and 1.0%. Of 25 quaternium-15-positive patients, 4 (0.1%) reacted positively without reacting to formaldehyde. Conclusion.On the basis of the results of this multicentre study, as well as of previous studies, it can be suggested that 2.0% (wt/vol) in water formaldehyde should be used in routine patch testing in the baseline series.
|
|
| 7. |
- Schalock, Peter C, et al.
(författare)
-
Hypersensitivity reactions to metallic implants-diagnostic algorithm and suggested patch test series for clinical use.
- 2012
-
Ingår i: Contact Dermatitis. - : Wiley. - 0105-1873 .- 1600-0536. ; 66:1, s. 4-19
-
Tidskriftsartikel (refereegranskat)abstract
- Cutaneous and systemic hypersensitivity reactions to implanted metals are challenging to evaluate and treat. Although they are uncommon, they do exist, and require appropriate and complete evaluation. This review summarizes the evidence regarding evaluation tools, especially patch and lymphocyte transformation tests, for hypersensitivity reactions to implanted metal devices. Patch test evaluation is the gold standard for metal hypersensitivity, although the results may be subjective. Regarding pre-implant testing, those patients with a reported history of metal dermatitis should be evaluated by patch testing. Those without a history of dermatitis should not be tested unless considerable concern exists. Regarding post-implant testing, a subset of patients with metal hypersensitivity may develop cutaneous or systemic reactions to implanted metals following implant. For symptomatic patients, a diagnostic algorithm to guide the selection of screening allergen series for patch testing is provided. At a minimum, an extended baseline screening series and metal screening is necessary. Static and dynamic orthopaedic implants, intravascular stent devices, implanted defibrillators and dental and gynaecological devices are considered. Basic management suggestions are provided. Our goal is to provide a comprehensive reference for use by those evaluating suspected cutaneous and systemic metal hypersensitivity reactions.
|
|
| 8. |
- Sosted, Heidi, et al.
(författare)
-
Contact allergy to common ingredients in hair dyes
- 2013
-
Ingår i: Contact Dermatitis. - : Wiley. - 0105-1873. ; 69:1, s. 32-39
-
Tidskriftsartikel (refereegranskat)abstract
- Background p-Phenylenediamine (PPD) is the primary patch test screening agent for hair dye contact allergy, and approximately 100 different hair dye chemicals are allowed. Objectives To examine whether PPD is an optimal screening agent for diagnosing hair dye allergy or whether other clinically important sensitizers exist. Methods Two thousand nine hundred and thirty-nine consecutive patients in 12 dermatology clinics were patch tested with five hair dyes available from patch test suppliers. Furthermore, 22 frequently used hair dye ingredients not available from patch test suppliers were tested in subgroups of approximate to 500 patients each. Results A positive reaction to PPD was found in 4.5% of patients, and 2.8% reacted to toluene-2,5-diamine (PTD), 1.8% to p-aminophenol, 1% to m-aminophenol, and 0.1% to resorcinol; all together, 5.3% (n=156). Dying hair was the most frequently reported cause of the allergy (55.4%); so-called temporary henna' tattoos were the cause in 8.5% of the cases. p-Methylaminophenol gave a reaction in 20 patients (2.2%), 3 of them with clinical relevance, and no co-reaction with the above five well-known hair dyes. Conclusions Hair dyes are the prime cause of PPD allergy. PPD identifies the majority of positive reactions to PTD, p-aminophenol and m-aminophenol, but not all, which justifies additional testing with hair dye ingredients from the used product.
|
|
| 9. |
|
|
| 10. |
- Thyssen, Jacob P., et al.
(författare)
-
Sensitivity and specificity of the nickel spot (dimethylglyoxime) test
- 2010
-
Ingår i: Contact Dermatitis. - 0105-1873 .- 1600-0536. ; 62:5, s. 279-288
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives: To evaluate the sensitivity and specificity of the DMG test. Methods: DMG spot testing, chemical analysis according to the EN 1811 reference method, and X-ray fluorescence spectroscopy (XRF) were performed concomitantly on 96 metallic components from earrings recently purchased in San Francisco. Results: The sensitivity of the DMG test was 59.3% and the specificity was 97.5% based on DMG-test results and nickel release concentrations determined by the EN 1811 reference method. Conclusions: The DMG test has a high specificity but a modest sensitivity. It may serve well for screening purposes. Past exposure studies may have underestimated nickel release from consumer items.
|
|
