| 1. |
- Bécoulet, A., et al.
(författare)
-
Science and technology research and development in support to ITER and the Broader Approach at CEA
- 2013
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 53:10
-
Tidskriftsartikel (refereegranskat)abstract
- In parallel to the direct contribution to the procurement phase of ITER and Broader Approach, CEA has initiated research & development programmes, accompanied by experiments together with a significant modelling effort, aimed at ensuring robust operation, plasma performance, as well as mitigating the risks of the procurement phase. This overview reports the latest progress in both fusion science and technology including many areas, namely the mitigation of superconducting magnet quenches, disruption-generated runaway electrons, edge-localized modes (ELMs), the development of imaging surveillance, and heating and current drive systems for steady-state operation. The WEST (W Environment for Steady-state Tokamaks) project, turning Tore Supra into an actively cooled W-divertor platform open to the ITER partners and industries, is presented.
|
|
| 2. |
- Allaria, E., et al.
(författare)
-
Highly coherent and stable pulses from the FERMI seeded free-electron laser in the extreme ultraviolet
- 2012
-
Ingår i: Nature Photonics. - 1749-4885. ; 6:10, s. 699-704
-
Tidskriftsartikel (refereegranskat)abstract
- Free-electron lasers (FELs) are promising devices for generating light with laser-like properties in the extreme ultraviolet and X-ray spectral regions. Recently, FELs based on the self-amplified spontaneous emission (SASE) mechanism have allowed major breakthroughs in diffraction and spectroscopy applications, despite the relatively large shot-to-shot intensity and photon-energy fluctuations and the limited longitudinal coherence inherent in the SASE mechanism. Here, we report results on the initial performance of the FERMI seeded FEL, based on the high-gain harmonic generation configuration, in which an external laser is used to initiate the emission process. Emission from the FERMI FEL-1 source occurs in the form of pulses carrying energy of several tens of microjoules per pulse and tunable throughout the 65 to 20 nm wavelength range, with unprecedented shot-to-shot wavelength stability, low-intensity fluctuations, close to transform-limited bandwidth, transverse and longitudinal coherence and full control of polarization.
|
|
| 3. |
- Angelbratt, Jon, 1981, et al.
(författare)
-
Carbon monoxide (CO) and ethane (C2H6) trends from ground-based solar FTIR measurements at six European stations, comparison and sensitivity analysis with the EMEP model
- 2011
-
Ingår i: Atmospheric Chemistry and Physics. - : Copernicus GmbH. - 1680-7316 .- 1680-7324. ; 11:17, s. 9253-9269
-
Tidskriftsartikel (refereegranskat)abstract
- Trends in the CO and C(2)H(6) partial columns (similar to 0-15 km) have been estimated from four European ground-based solar FTIR (Fourier Transform InfraRed) stations for the 1996-2006 time period. The CO trends from the four stations Jungfraujoch, Zugspitze, Harestua and Kiruna have been estimated to -0.45 +/- 0.16%yr(-1), -1.00 +/- 0.24%yr(-1), -0.62 +/- 0.19%yr(-1) and -0.61 +/- 0.16%yr(-1), respectively. The corresponding trends for C(2)H(6) are -1.51 +/- 0.23%yr(-1), -2.11 +/- 0.30%yr(-1), -1.09 +/- 0.25%yr(-1) and -1.14 +/- 0.18%yr(-1). All trends are presented with their 2-sigma confidence intervals. To find possible reasons for the CO trends, the global-scale EMEP MSC-W chemical transport model has been used in a series of sensitivity scenarios. It is shown that the trends are consistent with the combination of a 20% decrease in the anthropogenic CO emissions seen in Europe and North America during the 1996-2006 period and a 20% increase in the anthropogenic CO emissions in East Asia, during the same time period. The possible impacts of CH(4) and biogenic volatile organic compounds (BVOCs) are also considered. The European and global-scale EMEP models have been evaluated against the measured CO and C(2)H(6) partial columns from Jungfraujoch, Zugspitze, Bremen, Harestua, Kiruna and Ny-Alesund. The European model reproduces, on average the measurements at the different sites fairly well and within 10-22% deviation for CO and 14-31% deviation for C(2)H(6). Their seasonal amplitude is captured within 6-35% and 9-124% for CO and C(2)H(6), respectively. However, 61-98% of the CO and C(2)H(6) partial columns in the European model are shown to arise from the boundary conditions, making the global-scale model a more suitable alternative when modeling these two species. In the evaluation of the global model the average partial columns for 2006 are shown to be within 1-9% and 37-50% of the measurements for CO and C(2)H(6), respectively. The global model sensitivity for assumptions made in this paper is also analyzed.
|
|
| 4. |
- de Laat, A. T. J., et al.
(författare)
-
Validation of five years (2003-2007) of SCIAMACHY CO total column measurements using ground-based spectrometer observations
- 2010
-
Ingår i: Atmospheric Measurement Techniques. - : Copernicus GmbH. - 1867-1381 .- 1867-8548. ; 3:5, s. 1457-1471
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents a validation study of SCanning Imaging Absorption spectroMeter for Atmospheric CHartographY (SCIAMACHY) carbon monoxide (CO) total column measurements from the Iterative Maximum Likelihood Method (IMLM) algorithm using ground-based spectrometer observations from twenty surface stations for the five year time period of 2003-2007. Overall we find a good agreement between SCIAMACHY and ground-based observations for both mean values as well as seasonal variations. For high-latitude Northern Hemisphere stations absolute differences between SCIAMACHY and ground-based measurements are close to or fall within the SCIAMACHY CO 2 sigma precision of 0.2 x 10(18) molecules/cm(2) (similar to 10%) indicating that SCIAMACHY can observe CO accurately at high Northern Hemisphere latitudes. For Northern Hemisphere mid-latitude stations the validation is complicated due to the vicinity of emission sources for almost all stations, leading to higher ground-based measurements compared to SCIAMACHY CO within its typical sampling area of 8 degrees x 8 degrees. Comparisons with Northern Hemisphere mountain stations are hampered by elevation effects. After accounting for these effects, the validation provides satisfactory results. At Southern Hemisphere mid-to high latitudes SCIAMACHY is systematically lower than the ground-based measurements for 2003 and 2004, but for 2005 and later years the differences between SCIAMACHY and ground-based measurements fall within the SCIAMACHY precision. The 2003-2004 bias is consistent with previously reported results although its origin remains under investigation. No other systematic spatial or temporal biases could be identified based on the validation presented in this paper. Validation results are robust with regard to the choices of the instrument-noise error filter, sampling area, and time averaging required for the validation of SCIAMACHY CO total column measurements. Finally, our results show that the spatial coverage of the ground-based measurements available for the validation of the 2003-2007 SCIAMACHY CO columns is sub-optimal for validation purposes, and that the recent and ongoing expansion of the ground-based network by carefully selecting new locations may be very beneficial for SCIAMACHY CO and other satellite trace gas measurements validation efforts.
|
|
| 5. |
- Angelbratt, Jon, 1981, et al.
(författare)
-
A new method to detect long term trends of methane (CH4) and nitrous oxide (N2O) total columns measured within the NDACC ground-based high resolution solar FTIR network
- 2011
-
Ingår i: Atmospheric Chemistry and Physics. - : Copernicus GmbH. - 1680-7316 .- 1680-7324. ; 11:13, s. 6167-6183
-
Tidskriftsartikel (refereegranskat)abstract
- Total columns measured with the ground-based solar FTIR technique are highly variable in time due to atmospheric chemistry and dynamics in the atmosphere above the measurement station. In this paper, a multiple regression model with anomalies of air pressure, total columns of hydrogen fluoride (HF) and carbon monoxide (CO) and tropopause height are used to reduce the variability in the methane (CH(4)) and nitrous oxide (N(2)O) total columns to estimate reliable linear trends with as small uncertainties as possible. The method is developed at the Harestua station (60 degrees N, 11 degrees E, 600 ma.s.l.) and used on three other European FTIR stations, i.e. Jungfraujoch (47 degrees N, 8 degrees E, 3600 ma.s.l.), Zugspitze (47 degrees N, 11 degrees E, 3000 ma.s.l.), and Kiruna (68 degrees N, 20 degrees E, 400 ma.s.l.). Linear CH(4) trends between 0.13 +/- 0.01-0.25 +/- 0.02% yr(-1) were estimated for all stations in the 1996-2009 period. A piecewise model with three separate linear trends, connected at change points, was used to estimate the short term fluctuations in the CH(4) total columns. This model shows a growth in 1996-1999 followed by a period of steady state until 2007. From 2007 until 2009 the atmospheric CH(4) amount increases between 0.57 +/- 0.22-1.15 +/- 0.17% yr(-1). Linear N(2)O trends between 0.19 +/- 0.01-0.40 +/- 0.02% yr(-1) were estimated for all stations in the 1996-2007 period, here with the strongest trend at Harestua and Kiruna and the lowest at the Alp stations. From the N(2)O total columns crude tropospheric and stratospheric partial columns were derived, indicating that the observed difference in the N(2)O trends between the FTIR sites is of stratospheric origin. This agrees well with the N(2)O measurements by the SMR instrument onboard the Odin satellite showing the highest trends at Harestua, 0.98 +/- 0.28% yr(-1), and considerably smaller trends at lower latitudes, 0.27 +/- 0.25% yr(-1). The multiple regression model was compared with two other trend methods, the ordinary linear regression and a Bootstrap algorithm. The multiple regression model estimated CH(4) and N(2)O trends that differed up to 31% compared to the other two methods and had uncertainties that were up to 300% lower. Since the multiple regression method were carefully validated this stresses the importance to account for variability in the total columns when estimating trend from solar FTIR data.
|
|
| 6. |
- Bos, Peter MJ, et al.
(författare)
-
Human risk assessment of single exposure in chemical incidents : present situation and new and increasing chemical incident scenarios
- 2011
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- The release of chemicals from their containment, either accidentally or deliberately, is one of the most relevant risk scenarios in Europe. A human health risk assessment is a prerequisite for chemical incident prevention, preparedness and response. European guidance and harmonized Acute Exposure Reference Values (AERVs) are urgently needed for effective human health risk assessment in the context of chemical incidents.At present, no broad European consensus is available on guidance for risk assessment, risk management and risk communication purposes in case of chemical incidents. A review of legislation, existing or currently under revision, suggests that harmonized European guidance is not expected to be developed in the short term. An increasing number of European countries are developing their own procedures to assess the human health risk of chemical incident scenarios. The AERVs thus produced serve different purposes and are not interchangeable. Lack of international harmonization seriously obstructs a consistent response in chemical emergencies with transboundary effects within and beyond the EU, will hamper multinational companies attempting to make consistent risk assessments worldwide and will hinder consistent and transparent assessment, and management and communication of risks by different stakeholders.Emerging chemical incident risk scenarios and risk drivers have been identified. It is recommended to monitor more frequently at an early stage for new trends in chemicals, scenarios and risks from chemical incidents. A need for a specific approach to deal with single exposure to mixtures of chemicals is identified, as well as for specific guidance to adequately protect professional first responders.
|
|
| 7. |
- Heinälä, M, et al.
(författare)
-
Survey on European methodologies in the risk assessment of chemical exposures in emergency response situations
- 2013
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- Survey on European methodologies in the risk assessment of chemical exposures in emergency response situations. Prevention or mitigation of human health effects is often the major determinant underlying chemical incident prevention policy and emergency response decisions. The ability to perform a human health risk assessment is a prerequisite for effective chemical incident prevention, preparedness and response. To identify knowledge gaps, needs and concerns relating to health risks from chemical incidents, a web-based survey was sent to various groups of stakeholders. The release of acutely toxic substances and irritating/corrosive substances appeared to be the most important risk scenario. Almost 40% of the respondents also expected a future increase of chemical terrorism or sabotage. Developments in nanotechnology were perceived as potential future risk drivers although more information is needed on the health hazards of nanoparticles. A high number of respondents also expressed concern for the consequences of globalization, international trade and higher industry efficiency demands on health risks through chemical incidents. Acute Exposure Reference Values (AERVs) were considered important cornerstones but a need was expressed for recommendations on their use for the management of chemical emergencies. Based on this survey, it is advised to develop European consensus on an authoritative methodology to derive AERVs, to design a process for their implementation and to provide guidance and training on their practical application. Attention should be paid to the widely used acutely toxic and irritating/corrosive substances, to specific endpoints such as carcinogenicity and reproductive toxicity and new and emerging chemicals. Research should focus on developing plausible scenarios for emerging human health risks from chemical incidents to allow better prioritisation of future risk assessments.
|
|
