| 1. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 2. |
- Backes, Claudia, et al.
(författare)
-
Production and processing of graphene and related materials
- 2020
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
| 3. |
- Ferrando, Carlos, et al.
(författare)
-
Effects of oxygen on post-surgical infections during an individualised perioperative open-lung ventilatory strategy : a randomised controlled trial
- 2020
-
Ingår i: British Journal of Anaesthesia. - : ELSEVIER SCI LTD. - 0007-0912 .- 1471-6771. ; 124:1, s. 110-120
-
Tidskriftsartikel (refereegranskat)abstract
- Background: We aimed to examine whether using a high fraction of inspired oxygen (FIO2) in the context of an individualised intra- and postoperative open-lung ventilation approach could decrease surgical site infection (SSI) in patients scheduled for abdominal surgery. Methods: We performed a multicentre, randomised controlled clinical trial in a network of 21 university hospitals from June 6, 2017 to July 19, 2018. Patients undergoing abdominal surgery were randomly assigned to receive a high (0.80) or conventional (0.3) FIO2 during the intraoperative period and during the first 3 postoperative hours. All patients were mechanically ventilated with an open-lung strategy, which included recruitment manoeuvres and individualised positive end-expiratory pressure for the best respiratory-system compliance, and individualised continuous postoperative airway pressure for adequate peripheral oxyhaemoglobin saturation. The primary outcome was the prevalence of SSI within the first 7 postoperative days. The secondary outcomes were composites of systemic complications, length of intensive care and hospital stay, and 6-month mortality. Results: We enrolled 740 subjects: 371 in the high FIO2 group and 369 in the low FIO2 group. Data from 717 subjects were available for final analysis. The rate of SSI during the first postoperative week did not differ between high (8.9%) and low (9.4%) FIO2 groups (relative risk [RR]: 0.94; 95% confidence interval [CI]: 0.59-1.50; P=0.90]). Secondary outcomes, such as atelectasis (7.7% vs 9.8%; RR: 0.77; 95% CI: 0.48-1.25; P=0.38) and myocardial ischaemia (0.6% [n=2] vs 0% [n=0]; P=0.47) did not differ between groups. Conclusions: An oxygenation strategy using high FIO2 compared with conventional FIO2 did not reduce postoperative SSIs in abdominal surgery. No differences in secondary outcomes or adverse events were found.
|
|
| 4. |
- Nazarious, Miracle Israel, 1992-
(författare)
-
Scientific Instruments to Facilitate the Human Exploration of Mars
- 2020
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- This PhD thesis describes, from an engineering perspective, some of the preliminary steps that need to be implemented to facilitate the human exploration of Mars. It focuses on the development of a set of novel scientific or technology demonstrator instruments. The engineering problem starts with a conceptual idea and the definition of individual functional requirements, that may be related to scientific or technological objectives. To solve this problem, an unique approach adapted during this thesis, allowed for designing and building efficiently, testing and refining the instruments in multiple iterations using simple techniques like 3-D printing, breadboard prototyping and low-cost commercial off the shelf (COTS) components. This approach reduces the cost and facilitates the accessibility of space instrument design and testing to a broader community. The steps include demonstrating the operability of the concept with prototypes, calibrating the responses and validating their operation in representative environments, thereby raising the technology readiness level (TRL) of the instrument with a lower investment in time and resources than traditional approaches that use specialized components and fabrica-tion techniques.The thesis provides a detailed description of the design and development process, and discusses the calibration and validation results of four different instruments, namely: 1) Brine Observation Transition To Liquid Experiment (BOTTLE) as a part of HabitAbil-ity: Brines, Irradiation and Temperature (HABIT) instrument onboard the ESA/IKI’s ExoMars 2022 Surface Platform Kazachok, for investigating the surface environmen-tal conditions and demonstrating the capability of salts to absorb water on Mars, 2) Metabolt, a small-sized portable incubator to monitor the behaviour of the microbiome in soils, which will be a critical element of future greenhouses on Mars or the Moon, 3) Methanox, an in-situ resource utilization demonstrator for converting local resources on Mars and producing methane and ammonia as space fuel, and 4) PRessure Optimized PowEred Respirator (PROPER), a wearable cleanroom developed for protecting the hu-mans against biological pathogens, showing the direct applicability of this research to solve Earth-based problems. During the final phase of the PhD thesis, the world suffered the COVID-19 pandemic. This challenge provided an opportunity to test the approach presented in this thesis and inspired the development of this equipment, and may also be of relevance to protect from biological cross-contamination in planetary habitats and laboratories while handling local regolith materials and samples on Mars.This work also highlights the calibration of the HABIT Flight Model (FM) in the cleanroom of Omnisys Instruments AB, Sweden, defines the retrieval models that will be used during ExoMars 2022 mission operations and data archiving in the Planetary Science Archive (PSA). Parts of this thesis were already published in the form of peer-reviewed journal articles and conference abstracts.
|
|
| 5. |
- Wu, Yu-Tzu, et al.
(författare)
-
Education and wealth inequalities in healthy ageing in eight harmonised cohorts in the ATHLOS consortium : a population-based study
- 2020
-
Ingår i: The Lancet Public Health. - 2468-2667. ; 5:7, s. e386-e394
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: The rapid growth of the size of the older population is having a substantial effect on health and social care services in many societies across the world. Maintaining health and functioning in older age is a key public health issue but few studies have examined factors associated with inequalities in trajectories of health and functioning across countries. The aim of this study was to investigate trajectories of healthy ageing in older men and women (aged ≥45 years) and the effect of education and wealth on these trajectories.METHODS: This population-based study is based on eight longitudinal cohorts from Australia, the USA, Japan, South Korea, Mexico, and Europe harmonised by the EU Ageing Trajectories of Health: Longitudinal Opportunities and Synergies (ATHLOS) consortium. We selected these studies from the repository of 17 ageing studies in the ATHLOS consortium because they reported at least three waves of collected data. We used multilevel modelling to investigate the effect of education and wealth on trajectories of healthy ageing scores, which incorporated 41 items of physical and cognitive functioning with a range between 0 (poor) and 100 (good), after adjustment for age, sex, and cohort study.FINDINGS: We used data from 141 214 participants, with a mean age of 62·9 years (SD 10·1) and an age range of 45-106 years, of whom 76 484 (54·2%) were women. The earliest year of baseline data was 1992 and the most recent last follow-up year was 2015. Education and wealth affected baseline scores of healthy ageing but had little effect on the rate of decrease in healthy ageing score thereafter. Compared with those with primary education or less, participants with tertiary education had higher baseline scores (adjusted difference in score of 10·54 points, 95% CI 10·31-10·77). The adjusted difference in healthy ageing score between lowest and highest quintiles of wealth was 8·98 points (95% CI 8·74-9·22). Among the eight cohorts, the strongest inequality gradient for both education and wealth was found in the Health Retirement Study from the USA.INTERPRETATION: The apparent difference in baseline healthy ageing scores between those with high versus low education levels and wealth suggests that cumulative disadvantage due to low education and wealth might have largely deteriorated health conditions in early life stages, leading to persistent differences throughout older age, but no further increase in ageing disparity after age 70 years. Future research should adopt a lifecourse approach to investigate mechanisms of health inequalities across education and wealth in different societies.FUNDING: European Union Horizon 2020 Research and Innovation Programme.
|
|
| 6. |
- Afonso-Argilés, F. Javier, et al.
(författare)
-
Emergency department and hospital admissions among people with dementia living at home or in nursing homes : results of the European RightTimePlaceCare project on their frequency, associated factors and costs
- 2020
-
Ingår i: BMC Geriatrics. - : Springer Science and Business Media LLC. - 1471-2318. ; 20:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Evidence is lacking on the differences between hospitalisation of people with dementia living in nursing homes and those living in the community. The objectives of this study were: 1) to describe the frequency of hospital admission among people with dementia in eight European countries living in nursing homes or in the community, 2) to examine the factors associated with hospitalisation in each setting, and 3) to evaluate the costs associated with it. Methods: The present study is a secondary data analysis of the RightTimePlaceCare European project. A cross-sectional survey was conducted with data collected from people with dementia living at home or who had been admitted to a nursing home in the last 3 months, as well as from their caregivers. Data on hospital admissions at 3 months, cognitive and functional status, neuropsychiatric symptoms, comorbidity, polypharmacy, caregiver burden, nutritional status, and falls were assessed using validated instruments. Multivariate regression models were used to investigate the factors associated with hospital admission for each setting. Costs were estimated by multiplying quantities of resources used with the unit cost of each resource and inflated to the year 2019. Results: The study sample comprised 1700 people with dementia living in the community and nursing homes. Within 3 months, 13.8 and 18.5% of people living in nursing homes and home care, respectively, experienced ≥1 hospital admission. In the nursing home setting, only polypharmacy was associated with a higher chance of hospital admission, while in the home care setting, unintentional weight loss, polypharmacy, falls, and more severe caregiver burden were associated with hospital admission. Overall, the estimated average costs per person with dementia/year among participants living in a nursing home were lower than those receiving home care. Conclusion: Admission to hospital is frequent among people with dementia, especially among those living in the community, and seems to impose a remarkable economic burden. The identification and establishment of an individualised care plan for those people with dementia with polypharmacy in nursing homes, and those with involuntary weight loss, accidental falls, polypharmacy and higher caregiver burden in the home care setting, might help preventing unnecessary hospital admissions.
|
|
| 7. |
- Alimena, Juliette, et al.
(författare)
-
Searching for long-lived particles beyond the Standard Model at the Large Hadron Collider
- 2020
-
Ingår i: Journal of Physics G. - : IOP Publishing. - 0954-3899 .- 1361-6471. ; 47:9
-
Tidskriftsartikel (refereegranskat)abstract
- Particles beyond the Standard Model (SM) can generically have lifetimes that are long compared to SM particles at the weak scale. When produced at experiments such as the Large Hadron Collider (LHC) at CERN, these long-lived particles (LLPs) can decay far from the interaction vertex of the primary proton-proton collision. Such LLP signatures are distinct from those of promptly decaying particles that are targeted by the majority of searches for new physics at the LHC, often requiring customized techniques to identify, for example, significantly displaced decay vertices, tracks with atypical properties, and short track segments. Given their non-standard nature, a comprehensive overview of LLP signatures at the LHC is beneficial to ensure that possible avenues of the discovery of new physics are not overlooked. Here we report on the joint work of a community of theorists and experimentalists with the ATLAS, CMS, and LHCb experiments-as well as those working on dedicated experiments such as MoEDAL, milliQan, MATHUSLA, CODEX-b, and FASER-to survey the current state of LLP searches at the LHC, and to chart a path for the development of LLP searches into the future, both in the upcoming Run 3 and at the high-luminosity LHC. The work is organized around the current and future potential capabilities of LHC experiments to generally discover new LLPs, and takes a signature-based approach to surveying classes of models that give rise to LLPs rather than emphasizing any particular theory motivation. We develop a set of simplified models; assess the coverage of current searches; document known, often unexpected backgrounds; explore the capabilities of proposed detector upgrades; provide recommendations for the presentation of search results; and look towards the newest frontiers, namely high-multiplicity 'dark showers', highlighting opportunities for expanding the LHC reach for these signals.
|
|
| 8. |
- Altenhoff, Adrian M., et al.
(författare)
-
The Quest for Orthologs benchmark service and consensus calls in 2020
- 2020
-
Ingår i: Nucleic Acids Research. - : Oxford University Press (OUP). - 0305-1048 .- 1362-4962. ; 48:W1, s. W538-W545
-
Tidskriftsartikel (refereegranskat)abstract
- The identification of orthologs-genes in different species which descended from the same gene in their last common ancestor-is a prerequisite for many analyses in comparative genomics and molecular evolution. Numerous algorithms and resources have been conceived to address this problem, but benchmarking and interpreting them is fraught with difficulties (need to compare them on a common input dataset, absence of ground truth, computational cost of calling orthologs). To address this, the Quest for Orthologs consortium maintains a reference set of proteomes and provides a web server for continuous orthology benchmarking (http://orthology.benchmarkservice.org). Furthermore, consensus ortholog calls derived from public benchmark submissions are provided on the Alliance of Genome Resources website, the joint portal of NIH-funded model organism databases.
|
|
| 9. |
- Cabrera Arteaga, Javier, 1992-, et al.
(författare)
-
Superoptimization of WebAssembly bytecode
- 2020
-
Ingår i: Conference Companion of the 4th International Conference on Art, Science, and Engineering of Programming. - Portugal : Aakar Books.
-
Konferensbidrag (refereegranskat)abstract
- Motivated by the fast adoption of WebAssembly, we propose the first functional pipeline to support the superoptimization of WebAssembly bytecode. Our pipeline works over LLVM and Souper. We evaluate our superoptimization pipeline with 12 programs from the Rosetta code project. Our pipeline improves the code section size of 8 out of 12 programs. We discuss the challenges faced in superoptimization of WebAssembly with two case studies.
|
|
| 10. |
- Carleo, Ilaria, et al.
(författare)
-
The Multiplanet System TOI-421*
- 2020
-
Ingår i: Astronomical Journal. - : American Astronomical Society. - 1538-3881 .- 0004-6256. ; 160:3
-
Tidskriftsartikel (refereegranskat)abstract
- We report the discovery of a warm Neptune and a hot sub-Neptune transiting TOI-421 (BD-14 1137, TIC 94986319), a bright (V = 9.9) G9 dwarf star in a visual binary system observed by the Transiting Exoplanet Survey Satellite (TESS) space mission in Sectors 5 and 6. We performed ground-based follow-up observations-comprised of Las Cumbres Observatory Global Telescope transit photometry, NIRC2 adaptive optics imaging, and FIbre-fed Echelle Spectrograph, CORALIE, High Accuracy Radial velocity Planet Searcher, High Resolution echelle Spectrometer, and Planet Finder Spectrograph high-precision Doppler measurements-and confirmed the planetary nature of the 16 day transiting candidate announced by the TESS team. We discovered an additional radial velocity signal with a period of five days induced by the presence of a second planet in the system, which we also found to transit its host star. We found that the inner mini-Neptune, TOI-421 b, has an orbital period of P-b = 5.19672 +/- 0.00049 days, a mass of M-b = 7.17 +/- 0.66 M-circle plus, and a radius of R-b = R-circle plus, whereas the outer warm Neptune, TOI-421 c, has a period of P-c = 16.06819 +/- 0.00035 days, a mass of M-c = 16.42(-1.04)(+1.06)M(circle plus), a radius of R-c = 5.09(-0.15)(+0.16)R(circle plus), and a density of rho(c) = 0.685(-0.072)(+0.080) cm(-3). With its characteristics, the outer planet (rho(c) = 0.685(-0.0072)(+0.080) cm(-3)) is placed in the intriguing class of the super-puffy mini-Neptunes. TOI-421 b and TOI-421 c are found to be well-suited for atmospheric characterization. Our atmospheric simulations predict significant Ly alpha transit absorption, due to strong hydrogen escape in both planets, as well as the presence of detectable CH4 in the atmosphere of TOI-421 c if equilibrium chemistry is assumed.
|
|
