| 1. |
- Bertilsson, Erik, et al.
(författare)
-
Use of digital human modelling and consideration of anthropometric diversity in Swedish industry
- 2010
-
Ingår i: Proceedings of the 42nd annual Nordic Ergonomic Society Conference. - 9788299574723
-
Konferensbidrag (refereegranskat)abstract
- This paper study and clarify problems, needs and opportunities when working with anthropometric diversity in digital human modelling (DHM) systems. A comparison between product development and production development in Swedish automotive industry is made. Interviews with DHM users and ergonomics specialists about their way of working with anthropometric diversity confirmed that simulations are often done with only one or a few human models. The reason for this is claimed to be time consuming processes, both at the creation of the human model but mainly when correctly positioning the model in the CAD environment.
|
|
| 2. |
- Dey, Anil, et al.
(författare)
-
Combining axial and radial nanowire heterostructures: Radial Esaki diodes and tunnel field-effect transistors
- 2013
-
Ingår i: Nano Letters. - : American Chemical Society (ACS). - 1530-6992 .- 1530-6984. ; 13:12, s. 5919-5924
-
Tidskriftsartikel (refereegranskat)abstract
- The ever-growing demand on high-performance electronics has generated transistors with very impressive figures of merit. The continued scaling of the supply voltage of field-effect transistors, such as tunnel field-effect transistors (TFETs), requires the implementation of advanced transistor architectures including FinFETs and nanowire devices. Moreover, integration of novel materials with high electron mobilities, such as III-V semiconductors and graphene, are also being considered to further enhance the device properties. In nanowire devices, boosting the drive current at a fixed supply voltage or maintaining a constant drive current at a reduced supply voltage may be achieved by increasing the cross-sectional area of a device, however at the cost of deteriorated electrostatics. A gate-all-around nanowire device architecture is the most favorable electrostatic configuration to suppress short channel effects, however, the arrangement of arrays of parallel vertical nanowires to address the drive current predicament will require additional chip area. The use of a core-shell nanowire with a radial heterojunction in a transistor architecture provides an attractive means to address the drive current issue without compromising neither chip area nor device electrostatics. In addition to design advantages of a radial transistor architecture, we in this work illustrate the benefit in terms of drive current per unit chip area and compare the experimental data for axial GaSb/InAs Esaki diodes and TFETs to their radial counterparts and normalize the electrical data to the largest cross-sectional area of the nanowire, i.e. the occupied chip area, assuming a vertical device geometry. Our data on lateral devices show that radial Esaki diodes deliver almost 7 times higher peak current, Jpeak = 2310 kA/cm2, than the maximum peak current of axial GaSb/InAs(Sb) Esaki diodes per unit chip area. The radial TFETs also deliver high peak current densities Jpeak = 1210 kA/cm2 while their axial counterparts at most carry Jpeak = 77 kA/cm2, normalized to the largest cross-sectional area of the nanowire.
|
|
| 3. |
|
|
| 4. |
- Dey, Anil, et al.
(författare)
-
GaSb nanowire pFETs for III-V CMOS
- 2013
-
Ingår i: IEEE Device Research Conference. Proceedings. - 1548-3770. ; , s. 13-14
-
Konferensbidrag (refereegranskat)
|
|
| 5. |
- Froitzheim, Jan, 1981, et al.
(författare)
-
Investigation of Chromium Volatilization from FeCr Interconnects by a Denuder Technique
- 2010
-
Ingår i: Journal of the Electrochemical Society. - : The Electrochemical Society. - 1945-7111 .- 0013-4651. ; 157:9, s. B1295-B1300
-
Tidskriftsartikel (refereegranskat)abstract
- A technique is presented for accurate and time-resolved quantification of chromium volatilization from alloys at high temperature. A denuder tube which is coated with Na2CO3 is placed downstream of the samples. CrO2(OH)(2) that evaporated from the samples is collected on the denuder and converted to the thermally stable Na2CrO4. The chromate is then dissolved in water and determined quantitatively. Three commercially available ferritic 22% Cr steels intended for use as solid oxide fuel cell interconnect materials (Sanergy HT, Crofer 22 APU, and ZMG 232) have been investigated with respect to chromium volatilization and oxidation rate. The effect on chromium volatilization of a submicrometer cobalt coating on the steel surface is reported. Comparisons are made with a conventional thick ceramic coating. The experiments are carried out at 850 degrees C in N-2 - 20% O-2 - 3% H2O atmosphere. The submicrometer Co coatings proved to be very efficient, reducing Cr volatilization by 1 order of magnitude. Microscopic studies show that both uncoated steel and steel coated with a submicrometer cobalt film develop two-layered oxide scales with the bottom part consisting of a Cr-rich corundum-type oxide. The uncoated samples develop a top layer consisting of (Cr, Mn)(3)O-4 oxide, whereas the Co-coated samples exhibit a top layer consisting of Co-rich spinel oxide. (C) 2010 The Electrochemical Society. [DOI: 10.1149/1.3462987] All rights reserved.
|
|
| 6. |
- Gissén, Charlott, et al.
(författare)
-
Comparing energy crops for biogas production Yields, energy input and costs in cultivation using digestate and mineral fertilisation
- 2014
-
Ingår i: Biomass & Bioenergy. - : Elsevier BV. - 1873-2909 .- 0961-9534. ; 64, s. 199-210
-
Tidskriftsartikel (refereegranskat)abstract
- Analyses of six crops grown in southern Sweden for biogas production (hemp, sugar beet, maize, triticale, grass/clover ley, winter wheat) showed varying performance regarding methane yield per hectare and energy input and costs in the production and supply of crops as biogas feedstock. The highest biomass and biogas yield was observed for sugar beet. Crops with lower risk of negative environmental impact in cultivation, such as ley and hemp, produced less than half the methane energy yield per hectare. Triticale, also having less risk of negative environmental impact, gave an energy yield similar to that of winter wheat grain and maize. Replacing most of the mineral fertiliser with biogas digestate did not, with the exception for hemp, influence crop yields per hectare, but energy input in cultivation decreased by on average 34% for the six crops tested. For hemp and sugar beet the biogas feedstock costs for the freshly harvested crop per GJ methane were close to that of the economic reference crop, winter wheat grain. For maize, beet tops and first and second year ley, the feedstock costs were lower, and for triticale much lower. When ensiled crops were used for biogas the feedstock costs increased and only those of triticale silage remained slightly lower than the cost of dried wheat grain. However, all feedstock costs were so high that profitable biogas production based solely on ensiled crops would be difficult to achieve at present Swedish biogas sales prices. (c) 2014 Elsevier Ltd. All rights reserved.
|
|
| 7. |
- Gustavsson, Carl Gunnar, et al.
(författare)
-
Thrombotic occlusion of all left coronary branches in a young woman with severe ulcerative colitis
- 2011
-
Ingår i: ISRN Cardiology. - : Hindawi Limited. - 2090-5580 .- 2090-5599.
-
Tidskriftsartikel (refereegranskat)abstract
- Background. The thrombosis risk is increased in active ulcerative colitis. The limited number of reported complications have predominantly been cerebrovascular but other vessel territories may also be affected. Patient. During a severe attack of ulcerative colitis a 37-year-old woman suffered occlusion of all left coronary artery branches. Serial angiographies showed progressive recanalisation of the coronary arteries during anticoagulation, but no atherosclerotic stenosis. The cause of infarction was thus considered to be an extensive coronary thrombosis. However, a large battery of blood tests failed to identify any procoagulant abnormality. Conclusion. Evidence is now accumulating that the increased thrombosis risk also may involve the coronary arteries, even in young patients. To the best of our knowledge this is the third reported case ofmyocardial infarction despite angiographically normal coronary arteries in a patient with active ulcerative colitis. The extent of affected myocardiumwas in this case exceptionally large.
|
|
| 8. |
- Gärdenäs, Annemieki, et al.
(författare)
-
Estimating soil carbon stock changes by process-based models and soil inventories : uncertainties and complementarities
- 2011
-
Ingår i: Soil Carbon in Sensitive European Ecosystems. - Oxford : Wiley-Blackwell. - 9781119970019
-
Bokkapitel (refereegranskat)abstract
- In this chapter, four examples of scientific questions and challenges in which process-oriented modelling could provide a useful contribution for accounting soil organic carbon (SOC) stocks and changes are presented. These challenges include cases i) when measurements are either time-consuming and/or expensive or there are methodological limitations; ii) an attempt to verify the national soil inventory estimates through comparison with process-based model estimates; iii) prediction of the potential impact on SOC changes due to land-use change; and iv) a comparison of different scenarios for mitigating GHG-emissions. We found that the use of process-based models offers a complementary way to account SOC change and provides an option for assessing the potential impact of climate and land-use change on SOC stocks. However, uncertainty in model estimates is inherent and needs to be communicated. Progress has been made in the assessment of uncertainty and there is growing awareness of how this uncertainty can be communicated. Suggestions for collaborative approaches are presented in order to reduce the uncertainties.
|
|
| 9. |
- Johansson, Christina, et al.
(författare)
-
Växtnäring från trekammarbrunnar till energigräs
- 2013
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- En slutsats som dragits inom projektet är att själva kretsloppet för växtnäringsinnehållet i trekammarbrunnsslam inte är den viktigaste frågan ur hållbarhetssynpunkt vid odling av energigräs, eftersom återföringen av växtnäring med trekammarbrunnsslam, främst fosfor och kalium, är mycket begränsad. I stället är själva nyttjandet av energigräset som råvara för produktion av förnybara drivmedel mycket viktigare ur hållbarhetssynpunkt. Hållbarheten i systemet ligger i att energigräset kan omvandlas till förnybara drivmedel, såsom biogas och bioetanol, vilka ersätter bensin och diesel, som har en mycket stor klimatpåverkan. Enligt litteraturuppgifter ger en vallgröda på ca 9 ton torrsubstans (ts) per ha och år, en reduktion av växthusgasemissioner med ca 6 ton CO2-ekv. per hektar och år, under förutsättning att fordonsgas i form av metan produceras av vallgrödan och biogödseln, som kvarstår efter rötningen av vallgrödan, ersätter mineralgödsel på produktiv åkermark. Inom projektet har vi uppnått skördar på 5 - 15 ton ts per ha och år beroende på odlingslokal och vilket energigräs som odlats, om gräset varit gödslat eller ogödslat samt om baljväxter ingått i ”biogasvallen”. Skördenivåer i detta intervall tyder på att man kan uppnå ett hållbart system för produktion av biogas baserat på energigräs, enligt EU:s nuvarande hållbarhetskriterier (en CO2-reduktion på minst 35 %) för förnybara drivmedel, oberoende om gräset gödslas med trekammarbrunnsslam eller ej. Särskilt stor klimatnytta uppnås vid användning av biogasvallar som innehåller både gräs och baljväxter, eftersom dessa ger hög biomassaavkastning helt utan kvävegödsling. Biogaspotentialen hos de energigräs och biogasvallar som studerats i projektet ligger normalt i intervallet 250 – 350 l CH4 per kg VS, beroende på skördetidpunkt och förbehandlingsmetod. Att använda energiåkrar för odling av fleråriga energigräs där biomassan används för produktion av biogas, bioetanol eller fastbränsle innebär flera miljövinster, mest påtagligt genom minskad klimatpåverkan, eftersom fossil energi ersätts, men även genom att fleråriga grödor har lägre behov av insatser i form av jordbearbetning och ogräsbekämpning och lagrar in mer kol i rötterna och marken än ettåriga grödor. Ytterligare miljövinster kan erhållas om biomassa skördas på ogödslade energiåkrar nära känsliga vattenmiljöer, eftersom man då kan transportera bort växtnäring till produktiv åkermark, som annars skulle kunna orsaka övergödning. Vid användning av energigräs som biogassubstrat kan biogödseln, som blir kvar efter rötningen, användas som ett värdefullt gödselmedel inom ekologisk eller konventionell odling. Biogödseln innehåller lättillgänglig växtnäring och om den används för gödsling av livsmedelsgrödor på åkermark sker en stor miljövinst genom ersättning av mineralgödsel. För att trekammarbrunnsslam skall kunna användas som ett gödselmedel till energigräs så krävs det en hygienisering genom t.ex. tillsats av minst 0,6 % urea och lagring i minst 3 månader. Hygienisering med urea medför dock att trekammarbrunnsslammet får ett relativt högt kväveinnehåll i jämförelse med andra viktiga växtnäringsämnen, såsom fosfor och kalium. Detta innebär att fosfor och kalium måste tillföras med andra gödselmedel för att energiåkern inte skall lida brist på dessa växtnäringsämnen på längre sikt. Tillförseln av tungmetaller med det hygieniserade trekammarbrunnsslammet till energiåkern bedöms vara något större jämfört med om källsorterat klosettvatten eller nötflytgödsel används som gödselmedel till energigräsen. Halterna av miljöstörande organiska ämnena i trekammarbrunnsslam ligger dock långt under riktvärdena för avloppsslam enligt slamöverenskommelsen. Allt detta visar att hygieniserat trekammarbrunnsslam kan användas som en växtnäringsresurs vid odling av energigräs eller biogasvallar på energiåkrar, men att hygieniserat klosettvatten skulle vara ett väl så bra alternativ.
|
|
| 10. |
- Lindahl, Mattias, 1971-, et al.
(författare)
-
Industrial cleaning with Qlean Water : a case study of printed circuit boards
- 2013
-
Ingår i: Journal of Cleaner Production. - : Elsevier BV. - 0959-6526 .- 1879-1786. ; 47, s. 19-25
-
Tidskriftsartikel (refereegranskat)abstract
- Many manufacturing companies are looking for ways to substitute environmentally problematic cleaning methods for surface treatments with more environmentally friendly ones. In this paper, one potential solution is described. The Qlean method, based on cleaning with highly pure water (in this paper defined as Qlean Water), is a novel cleaning method. This method, now utilized at one plant at a leading major international electronic company, has substituted previous chemical-based methods for cleaning printed circuit boards prior to lacquering. This paper presents, based on that company's primary data, a comparative study using environmental analysis and economic life cycle cost review between cleaning with Qlean Water and conventional cleaning. The focus is on the environmental and economic performance of the two alternatives. The conclusion is that Qlean Water offers both a significant economic and environmental cost reduction and a better product. This is the case even though all identified economic benefits derived from using Qlean Water, e.g. that the quality and technical lifetime have been extended for the printed circuit boards with the Qlean Water cleaning method, are not considered in the economic analysis.
|
|
