| 1. |
- Bergqvist, Jonas, et al.
(författare)
-
In situ reflectance imaging of organic thin film formation from solution
- 2012
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- The rapid progress of organic photovoltaic devices during the last decade, with power conversion efficiencies now exceeding 8%, has brought the technology close to an industrial breakthrough. For polymer solar cells, roll to roll printing is desired to gain the production advantage. The formation of the photoactive material from solutions needs to be controlled and optimized. Therefore a suitable method to monitor the deposition process is needed as deviations of drying times1 and drying rates2 during the coating process have proven to generate morphology variations causing variations in photocurrent generation.Here we demonstrate how reflectance imaging can be used to monitor the drying process, both for spin coating and blade coating deposition. A blue LED is used as light source to generate specular reflections imaged by a CMOS camera. The thinning of the wet film can then be observed by thin film interference, and can be recorded for each pixel. This enables an estimation of the evaporation rate for each pixel mapped over the substrate. For spin coating the evaporation rate is shown to increase with the distance from the rotation center, whereas the air flow is the determining parameter during blade coating. By mapping the times when interference ceases, lateral variations in drying time are visualized. Furthermore the quenching of polymer photoluminescence during the drying process can be visualized, thus creating a possibility to estimate morphological variations. Moreover lateral thickness variations of the dry film can be visualized by scanning ellipsometry. After depositing a top electrode photocurrent images can be generated by a laser scanning method. This allows for a direct comparison of drying conditions and photocurrent generation. The possibility to monitor the thin film formation as well as lateral variations in thickness in-situ by a non-invasive method, is an important step for future large scale applications where stable high performing generating morphologies have to be formed over large areas.1Schmidt-Hansberg, B.; Sanyal, M.; Klein, M.F.G.; Pfaff, M.; Schnabel, N.; Jaiser, S.; Vorobiev, A.; Müller, E.; Colsmann, A.; Scharfer, P.; Gerthsen, D.; Lemmer, U.; Barrena, E.; and Schabel, W., ACS Nano 5 , 2011, 8579-85902 Hou, L.; Wang, E.; Bergqvist, J.; Andersson, V.B.; Wang, Z.; Müller, C.; Campoy-Quiles, M.; Andersson, M.R.; Zhang, F.; Inganäs, O.,Adv. Func. Mat. 21 , 2011, 3169–3175
|
|
| 2. |
- Tang, Zheng, et al.
(författare)
-
Interlayer for Modified Cathode in Highly Efficient Inverted ITO-Free Organic Solar Cells
- 2012
-
Ingår i: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 24:4, s. 554-
-
Tidskriftsartikel (refereegranskat)abstract
- Inverted polymer solar cells with a bottom metal cathode modified by a conjugated polymer interlayer show considerable improvement of photocurrent and fill factor, which is due to hole blocking at the interlayer, and a modified surface energy which affects the nanostructure in the TQ1/[70]PCBM blend.
|
|
| 3. |
- Tang, Zheng, et al.
(författare)
-
Semi-Transparent Tandem Organic Solar Cells with 90% Internal Quantum Efficiency
- 2012
-
Ingår i: Advanced Energy Materials. - : Wiley. - 1614-6840 .- 1614-6832. ; 2:12, s. 1467-1476
-
Tidskriftsartikel (refereegranskat)abstract
- Semi-transparent (ST) organic solar cells with potential application as power generating windows are studied. The main challenge is to find proper transparent electrodes with desired electrical and optical properties. In this work, this is addressed by employing an amphiphilic conjugated polymer PFPA-1 modified ITO coated glass substrate as the ohmic electron-collecting cathode and PEDOT:PSS PH1000 as the hole-collecting anode. For active layers based on different donor polymers, considerably lower reflection and parasitic absorption are found in the ST solar cells as compared to solar cells in the standard geometry with an ITO/PEDOT:PSS anode and a LiF/Al cathode. The ST solar cells have remarkably high internal quantum efficiency at short circuit condition (similar to 90%) and high transmittance (similar to 50%). Hence, efficient ST tandem solar cells with enhanced power conversion efficiency (PCE) compared to a single ST solar cell can be constructed by connecting the stacked two ST sub-cells in parallel. The total loss of photons by reflection, parasitic absorption and transmission in the ST tandem solar cell can be smaller than the loss in a standard solar cell based on the same active materials. We demonstrate this by stacking five separately prepared ST cells on top of each other, to obtain a higher photocurrent than in an optimized standard solar cell.
|
|
| 4. |
- Tvingstedt, Kristofer, et al.
(författare)
-
Light trapping with total internal reflection and transparent electrodes in organic photovoltaic devices
- 2012
-
Ingår i: Applied Physics Letters. - : American Institute of Physics (AIP). - 0003-6951 .- 1077-3118. ; 101:16
-
Tidskriftsartikel (refereegranskat)abstract
- Herein, we demonstrate a method to build highly efficient light trapping structures for printed organic solar cells and modules, compatible with roll to roll manufacturing. Echelle grating structures in combination with semitransparent electrodes allow for efficient light trapping via means of total internal reflection. With this method, we demonstrate an increased cell photocurrent response up to 24%, compared to a standard cell configuration with a planar reflector. The demonstrated light trapping approach is expected to be even more useful for photovoltaic modules, where light hitting "dead areas" in between the sub-cells comprising the module will now be utilized.
|
|
| 5. |
- Vandewal, Koen, et al.
(författare)
-
Polarization anisotropy of charge transfer absorption and emission of aligned polymer: fullerene blend films
- 2012
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - : American Physical Society. - 1098-0121 .- 1550-235X. ; 86:3, s. 035212-
-
Tidskriftsartikel (refereegranskat)abstract
- An improved understanding of the electronic structure of interfacial charge transfer (CT) states is of importance due to their crucial role in charge carrier generation and recombination in organic donor-acceptor (DA) solar cells. DA combinations with a small difference between the energy of the CT state (E-CT) and energy of the donor exciton (E-D*) are of special interest since energy losses due to electron transfer are minimized, resulting in an optimized open-circuit voltage. In that case, the CT state can be considered as a resonance mixture, containing character of a fully ionic state (D+ A(-)) and of the local polymer excited state (D* A). We show that the D* A contribution to the overall CT state wave function can be determined by measurements of the polarization anisotropy of CT absorption and emission of polymer: fullerene blends with aligned polymer chains. We study two donor polymers, P3HT and TQ1, blended with fullerene acceptors with different ionization potentials, allowing variation of the E-D* -E-CT difference. We find that, upon decreasing E-D* -E-CT, the local excitonic D* A character of the CT state increases, resulting in a decreased fraction of charge transferred and an increased transition dipole moment. For typical polymer: fullerene systems, this effect is expected to become detrimental for device performance if E-D* - E-CT andlt; 0.1 eV. This however, depends on the electronic coupling between D* A and D+ A(-), which we experimentally estimate to be similar to 6 meV for the TQ1: PCBM system.
|
|
| 6. |
- Vandewal, Koen, et al.
(författare)
-
Quantification of Quantum Efficiency and Energy Losses in Low Bandgap Polymer:Fullerene Solar Cells with High Open-Circuit Voltage
- 2012
-
Ingår i: Advanced Functional Materials. - : Wiley-VCH Verlag Berlin. - 1616-301X .- 1616-3028. ; 22:16, s. 3480-3490
-
Tidskriftsartikel (refereegranskat)abstract
- In organic solar cells based on polymer:fullerene blends, energy is lost due to electron transfer from polymer to fullerene. Minimizing the difference between the energy of the polymer exciton (ED*) and the energy of the charge transfer state (ECT) will optimize the open-circuit voltage (Voc). In this work, this energy loss ED*-ECT is measured directly via Fourier-transform photocurrent spectroscopy and electroluminescence measurements. Polymer:fullerene photovoltaic devices comprising two different isoindigo containing polymers: P3TI and PTI-1, are studied. Even though the chemical structures and the optical gaps of P3TI and PTI-1 are similar (1.4 eV1.5 eV), the optimized photovoltaic devices show large differences in Voc and internal quantum efficiency (IQE). For P3TI:PC71BM blends a ED*-ECT of similar to 0.1 eV, a Voc of 0.7 V and an IQE of 87% are found. For PTI-1:PC61BM blends an absence of sub-gap charge transfer absorption and emission bands is found, indicating almost no energy loss in the electron transfer step. Hence a higher Voc of 0.92 V, but low IQE of 45% is obtained. Morphological studies and field dependent photoluminescence quenching indicate that the lower IQE for the PTI-1 system is not due to a too coarse morphology, but is related to interfacial energetics. Losses between ECT and qVoc due to radiative and non-radiative recombination are quantified for both material systems, indicating that for the PTI-1:PC61BM material system, Voc can only be increased by decreasing the non-radiative recombination pathways. This work demonstrates the possibility of obtaining modestly high IQE values for material systems with a small energy offset (andlt;0.1 eV) and a high Voc.
|
|
