| 1. |
- Lindberg, Siv M, et al.
(author)
-
A product semantic study of the influence of the sense of touch on the evaluation of wood-based materials
- 2013
-
In: Materials & design. - : Elsevier BV. - 0264-1275 .- 1873-4197 .- 0261-3069. ; 52, s. 300-307
-
Journal article (peer-reviewed)abstract
- Based on product semantics, this study investigated how the tactile attributes of wood and wood-based composites are perceived and interpreted semantically. The wood-based samples included ash, birch, elm, oak, pine, OSB (oriented strand board), two wood pulp-reinforced polylactide composites, Comp A and B and one wood-fiber reinforced polypropene composite, Comp C. The subjects rated the samples by the descriptive words natural, exclusive, eco-. friendly, rough, inexpensive, reliable, warm, modern, snug and solid. The most significant differences between the samples were found for roughness and for the descriptors, reliable, natural and solid. A principal component analysis yielded three attributes based on the tactile perceptions: reliable, old-. fashioned and smooth. The solid wood pieces were perceived as natural and oak was perceived as being exclusive. The composite materials presented a greater variation in terms of perceived attributes than the wood specimens.
|
|
| 2. |
- Gren, Åsa, et al.
(author)
-
How smart is smart growth? : Examining the environmental validation behind city compaction
- 2019
-
In: Ambio. - : Springer Netherlands. - 0044-7447 .- 1654-7209. ; 48:6, s. 580-589
-
Research review (peer-reviewed)abstract
- Smart growth (SG) is widely adopted by planners and policy makers as an environmentally friendly way of building cities. In this paper, we analyze the environmental validity of the SG-approach based on a review of the scientific literature. We found a lack of proof of environmental gains, in combination with a great inconsistency in the measurements of different SG attributes. We found that a surprisingly limited number of studies have actually examined the environmental rationales behind SG, with 34% of those studies displaying negative environmental outcomes of SG. Based on the insights from the review, we propose that research within this context must first be founded in more advanced and consistent knowledge of geographic and spatial analyses. Second, it needs to a greater degree be based on a system's understanding of urban processes. Third, it needs to aim at making cities more resilient, e.g., against climate-change effects.
|
|
| 3. |
- Sattari, Amir, 1980-, et al.
(author)
-
INDUSTRIAL NANOPARTICLES HEALTH RISKS AND ADVANTAGES OF A DECENT INDUSTRIAL VENTILATION SYSTEM IN REDUCING THE RELATED RISKS
- 2012
-
In: INDUSTRIAL NANOPARTICLES HEALTH RISKS AND ADVANTAGES OF A DECENT INDUSTRIAL VENTILATION SYSTEM IN REDUCING THE RELATED RISKS. ; , s. -6
-
Conference paper (peer-reviewed)abstract
- With the fast-growing use of nanoparticles (NPs) in a wide range of production and manufacturing processes, and great health and environmental risks associated to NPs, it is important to treat the industry-produced NPs in a proper way. Ventilation of industrial workplaces lies within the concept of sustainability challenges for the development of nanoproducts. Due to the decreased grain size of material to nano limits and thus the appearance of either new or changed properties, health risk of workers in such environments is critical concerning the complicated and unknown characteristics of nanoparticles. There is great evidence over the past few years that ultrafine particles and especially NPs in the breathing air are strong toxins. Different mitigation measures for air-borne nanoparticles in industrial workplaces are substitution, engineering controls such as ventilation and provision of personal protective equipment. In this paper selection criteria for ventilation systems and different ventilation methods (hood ventilation and global enclosure/room ventilation systems) as engineering controls of nanoparticles within industrial enclosures will be reviewed. Novel methods for improvement of ventilation efficiency in general and industrial work places with an eye on ventilation of nanoparticles will be presented.
|
|
| 4. |
- Astner, Linda, et al.
(author)
-
Utilizing waste to create new port land
- 2018
-
In: Port Technology. ; 77:Spring, s. 118-119
-
Journal article (pop. science, debate, etc.)abstract
- This paper presents the most recent port expansion and the major dredging and land creation project that has been undertaken in the Port of Gävle since 2007. This project has seen the deepening and widening of the fairway to accommodate larger vessels, as well as the construction of a new cargo terminal area due to open in late 2019. This land creation work has been undertaken using contaminated sediments dredged from deepening the shipping channel.
|
|
| 5. |
- Panigrahi, Smruti Ranjan, 1983-, et al.
(author)
-
A Study of Delay and Doppler Spreads at 24 GHz ISM band
- 2020
-
In: 2020 16th International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob). - : Institute of Electrical and Electronics Engineers (IEEE). - 9781728197227 ; , s. 1-6
-
Conference paper (peer-reviewed)abstract
- This article investigates the wide-band channel characteristics at 24 GHz ISM band in a mobile radio environment. The mobility in the test environment is achieved by attaching the transmit antenna to a KUKA robot's arm. The radio measurements were carried out inside the robotics lab at the University of Gävle, Sweden. The radio channel measurements were carried out at various situations, e.g., line of sight (LOS), non-line of sight (NLOS), regular lab environment, reflective environment, and different velocities of the robot's arm. The influence of these situations on the power delay profile, Doppler spectral density, root mean square (RMS) delay spread, RMS Doppler spread, coherence bandwidth and coherence time, has been studied.
|
|
| 6. |
- Stojanovic, Bojan, et al.
(author)
-
A Steady State Thermal Duct Model Derived by Fin-Theory Approach and Applied on an Unglazed Solar Collector.
- 2009
-
In: Solar Energy. - : Elsevier BV. - 0038-092X .- 1471-1257. ; 84:10, s. 1838-1851
-
Journal article (peer-reviewed)abstract
- This paper presents the thermal modelling of an unglazed solar collector (USC) flat panel, with the aim of producing a detailed yet swift thermal steady-state model. The model is analytical, one-dimensional (ID) and derived by a fin-theory approach. It represents the thermal performance of an arbitrary duct with applied boundary conditions equal to those of a flat panel collector. The derived model is meant to be used for efficient optimisation and design of USC flat panels (or similar applications), as well as detailed thermal analysis of temperature fields and heat transfer distributions/variations at steady-state conditions; without requiring a large amount of computational power and time. Detailed surface temperatures are necessary features for durability studies of the surface coating, hence the effect of coating degradation on USC and system performance. The model accuracy and proficiency has been benchmarked against a detailed three-dimensional Finite Difference Model (3D FDM) and two simpler ID analytical models. Results from the benchmarking test show that the fin-theory model has excellent capabilities of calculating energy performances and fluid temperature profiles, as well as detailed material temperature fields and heat transfer distributions/variations (at steady-state conditions), while still being suitable for component analysis in junction to system simulations as the model is analytical. The accuracy of the model is high in comparison to the 3D FDM (the prime benchmark), as long as the fin-theory assumption prevails (no 'or negligible' temperature gradient in the fin perpendicularly to the fin length). Comparison with the other models also shows that when the USC duct material has a high thermal conductivity, the cross-sectional material temperature adopts an isothermal state (for the assessed USC duct geometry), which makes the ID isothermal model valid. When the USC duct material has a low thermal conductivity, the heat transfer course of events adopts a 1D heat flow that reassembles the conditions of the 1D simple model (for the assessed USC duct geometry); ID heat flow through the top and bottom fins/sheets as the duct wall reassembles a state of adiabatic condition.
|
|
| 7. |
- Wlazlak, Paraskeva, et al.
(author)
-
Original equipment manufacturer (OEM)-supplier integration to prepare for production ramp-up
- 2019
-
In: Journal of Manufacturing Technology Management. - : Emerald Group Publishing Limited. - 1741-038X .- 1758-7786. ; 30:2, s. 506-530
-
Journal article (peer-reviewed)abstract
- Purpose: Although prior research provides evidence that production ramp-up is often disrupted by supplier-related problems, it fails to discuss how the original equipment manufacturer (OEM) and various types of suppliers integrate their functions and operations to secure preparations for production ramp-up. The purpose of this paper is to investigate OEM–supplier integration in a new product development (NPD) project to prepare for production ramp-up.Design/methodology/approach: The results presented in this paper are based on a real-time, longitudinal study of a single collaborative NPD project in the mechanical engineering industry. The NPD project involves seven suppliers and it is carried out in a large Swedish company (the OEM) and fits the theory-elaborating approach of this research.Findings: This study argues that the aspect of timing in OEM–supplier integration, the OEM’s research and development (R&D) attitude toward collaboration and the OEM’s (R&D) operating procedure are challenges affecting the preparation for production ramp-up. The following three mechanisms to facilitate OEM–supplier integration in order to prepare for production ramp-up are also discussed: the mediator’s role, the OEM’s face-to-face meeting at the project level and suppliers’ formal face-to-face meetings with the OEM and internally.Originality/value: This paper elaborates on and extends prior research on production ramp-up by conducting an empirical analysis that incorporates supplier integration in NPD. It bridges the gap between the literature on production ramp-up and on supplier integration in NPD and clearly indicates that supplier integration is an important prerequisite for successful production ramp-up.
|
|
| 8. |
- Kobayashi, Tomohiro, et al.
(author)
-
Stream Tube based Analysis of Problems in Prediction of Cross-Ventilation Rate
- 2009
-
In: The International Journal of Ventilation. - : Informa UK Limited. - 1473-3315 .- 2044-4044. ; 7:4, s. 321-334
-
Journal article (peer-reviewed)abstract
- The airflow rate of a building ventilated by wind is usually predicted by using the wind pressure coefficients obtained for a sealed building and discharge coefficients based on measuring the airflow characteristics through an opening in a sealed chamber (chamber method). This can result in the underestimation of wind driven flow through large openings located on opposite sides of a room. In this paper, the discharge coefficient, based on the chamber method, and the actual condition of cross-ventilation are calculated and compared with each other by means of stream tube analysis. The driving pressure based on wind pressure coefficients obtained from a sealed building are also compared with those based on pressures inside the stream tube of the actual flow field representing a porous rather than sealed building. A building model of dimensions 120 mm (width)x120 mm (height)x180 mm (length) was used for the analyses. The size of openings, expressed as the porosity (opening area divided by facade area), was 11.6 %, 20.7 % and 46.5 %. These models were analyzed by CFD simulation and the stream tubes caught by the opening were determined. From the analysis the errors in discharge coefficient and wind pressure coefficient were identified. Finally, the flow rate based on these discharge coefficients and driving pressures were calculated and compared. It is shown that the effect of the underestimation of the discharge coefficients by the chamber method is significant for all cases of porosity studied in this paper. Moreover, it is shown that the use of wind pressure coefficients is not appropriate for the case of extremely large openings.
|
|
| 9. |
- Lidberg, Tina, 1982-, et al.
(author)
-
Environmental impact of energy refurbishment of buildings within different district heating systems
- 2018
-
In: Applied Energy. - : ELSEVIER SCI LTD. - 0306-2619 .- 1872-9118. ; 227, s. 231-238
-
Journal article (peer-reviewed)abstract
- The refurbishment of existing buildings is often considered a way to reduce energy use and CO2 emissions in the building stock. This study analyses the primary energy and CO2 impact of refurbishing a multi-family house with different refurbishment packages, given various district heating systems. Four models of typical district heating systems were defined to represent the Swedish district heating sector. The refurbishment packages were chosen to represent typical, yet innovative ways to improve the energy efficiency and indoor climate of a multi-family house. The study was made from a system perspective, including the valuation of changes in electricity use on the margin. The results show a significant difference in primary energy use for the different refurbishment packages, depending on both the package itself as well as the type of district heating system. While the packages with heat pumps had the lowest final energy use per m(2) of floor area, air heat recovery proved to reduce primary energy use and emissions of CO2-equivalents more, independent of the type of district heating system, as it leads to a smaller increase in electricity use.
|
|
| 10. |
- Ljunggren Söderman, Maria, 1967, et al.
(author)
-
Integrated Economic and Environmental Assessment of Waste Policy Instruments
- 2016
-
In: Sustainability. - : MDPI AG. - 2071-1050. ; 8:5
-
Journal article (peer-reviewed)abstract
- The need for new policy instruments supporting the on-going transition from end-of-pipe waste treatment to resource management has been recognized in European policy. Instruments need to be carefully assessed before implementation to promote the desired changes and avoid problem shifting. Mathematical models may assist policy makers in such assessments. This paper presents a set of soft-linked models for assessing the economic and environmental impacts of policy instruments for both the prevention and management of waste and discusses its strengths and limitations. Consisting of (1) a macro-economic model, (2) a systems engineering model for waste management and (3) a life cycle assessment model for waste management, the set is primarily suited to assessing market-based instruments and environmental regulations. Considerable resources were needed for developing and using the set, and there are clear limits as to what can be addressed. However, if only one of the models had been used, neither the range of instruments nor the scope of impacts would have been possible to cover. Furthermore, soft-linked models allow many disciplines to contribute within one harmonized framework. Such integrated assessments may become increasingly useful for continuing the implementation of policy for sustainable governance of society's material resources.
|
|
