| 1. |
- Hussain, Laiq, et al.
(author)
-
Defect-induced infrared electroluminescence from radial GaInP/AlGaInP quantum well nanowire array light- emitting diodes
- 2017
-
In: Nanotechnology. - Bristol : IOP Publishing. - 0957-4484 .- 1361-6528. ; 28:48
-
Journal article (peer-reviewed)abstract
- Radial GaInP/AlGaInP nanowire array light-emitting diodes (LEDs) are promising candidates for novel high-efficiency solid state lighting due to their potentially large strain-free active emission volumes compared to planar LEDs. Moreover, by proper tuning of the diameter of the nanowires, the fraction of emitted light extracted can be significantly enhanced compared to that of planar LEDs. Reports so far on radial growth of nanowire LED structures, however, still point to significant challenges related to obtaining defect-free radial heterostructures. In this work, we present evidence of optically active growth-induced defects in a fairly broad energy range in vertically processed radial GaInP/AlGaInP quantum well nanowire array LEDs using a variety of complementary experimental techniques. In particular, we demonstrate strong infrared electroluminescence in a spectral range centred around 1 eV (1.2 μm) in addition to the expected red light emission from the quantum well. Spatially resolved cathodoluminescence studies reveal a patchy red light emission with clear spectral features along the NWs, most likely induced by variations in QW thickness, composition and barriers. Dark areas are attributed to infrared emission generated by competing defect-assisted radiative transitions, or to trapping mechanisms involving non-radiative recombination processes. Possible origins of the defects are discussed.
|
|
| 2. |
- Jafari Jam, R., et al.
(author)
-
Embedded sacrificial AlAs segments in GaAs nanowires for substrate reuse
- 2020
-
In: Nanotechnology. - Bristol : Institute of Physics Publishing (IOPP). - 0957-4484 .- 1361-6528. ; 31:20
-
Journal article (peer-reviewed)abstract
- We report on the use of a sacrificial AlAs segment to enable substrate reuse for nanowire synthesis. A silicon nitride template was deposited on a p-type GaAs substrate. Then a pattern was transferred to the substrate by nanoimprint lithography and reactive ion etching. Thermal evaporation was used to define Au seed particles. Metalorganic vapour phase epitaxy was used to grow AlAs-GaAs NWs in the vapour-liquid-solid growth mode. The yield of synthesised nanowires, compared to the number expected from the patterned template, was more than 80%. After growth, the nanowires were embedded in a polymer and mechanically removed from the parent substrate. The parent substrate was then immersed in an HCl:H2O (1:1) mixture to dissolve the remaining stub of the sacrificial AlAs segment. The pattern fidelity was preserved after peeling off the nanowires and cleaning, and the semiconductor surface was flat and ready for reuse. Au seed particles were then deposited on the substrate by use of pulse electrodeposition, which was selective to the openings in the growth template, and then nanowires were regrown. The yield of regrowth was less optimal compared to the first growth but the pattern was preserved. Our results show a promising approach to reduce the final cost of III-V nanowire based solar cells. © 2020 The Author(s). Published by IOP Publishing Ltd.
|
|
| 3. |
- Jain, Vishal, et al.
(author)
-
Bias-dependent spectral tuning in InP nanowire-based photodetectors
- 2017
-
In: Nanotechnology. - Bristol : IOP Publishing. - 0957-4484 .- 1361-6528. ; 28:11
-
Journal article (peer-reviewed)abstract
- Nanowire array ensembles contacted in a vertical geometry are extensively studied and considered strong candidates for next generations of industrial scale optoelectronics. Key challenges in this development deal with optimization of the doping profile of the nanowires and the interface between nanowires and transparent top contact. Here we report on photodetection characteristics associated with doping profile variations in InP nanowire array photodetectors. Bias-dependent tuning of the spectral shape of the responsivity is observed which is attributed to a Schottky-like contact at the nanowire-ITO interface. Angular dependent responsivity measurements, compared with simulated absorption spectra, support this conclusion. Furthermore, electrical simulations unravel the role of possible self-gating effects in the nanowires induced by the ITO/SiO x wrap-gate geometry. Finally, we discuss possible reasons for the observed low saturation current at large forward biases.
|
|
| 4. |
- Jain, Vishal, et al.
(author)
-
InP/InAsP Nanowire-Based Spatially Separate Absorption and Multiplication Avalanche Photodetectors
- 2017
-
In: ACS Photonics. - Washington : American Chemical Society (ACS). - 2330-4022. ; 4:11, s. 2693-2698
-
Journal article (peer-reviewed)abstract
- Avalanche photodetectors (APDs) are key components in optical communication systems due to their increased photocurrent gain and short response time as compared to conventional photodetectors. A detector design where the multiplication region is implemented in a large band gap material is desired to avoid detrimental Zener tunneling leakage currents, a concern otherwise in smaller band gap materials required for absorption at 1.3/1.55 μm. Self-assembled III-V semiconductor nanowires offer key advantages such as enhanced absorption due to optical resonance effects, strain-relaxed heterostructures, and compatibility with mainstream silicon technology. Here, we present electrical and optical characteristics of single InP and InP/InAsP nanowire APD structures. Temperature-dependent breakdown characteristics of p+-n-n+ InP nanowire devices were investigated first. A clear trap-induced shift in breakdown voltage was inferred from I-V measurements. An improved contact formation to the p+-InP segment was observed upon annealing, and its effect on breakdown characteristics was investigated. The band gap in the absorption region was subsequently varied from pure InP to InAsP to realize spatially separate absorption and multiplication APDs in heterostructure nanowires. In contrast to the homojunction APDs, no trap-induced shifts were observed for the heterostructure APDs. A gain of 12 was demonstrated for selective optical excitation of the InAsP segment. Additional electron-beam-induced current measurements were carried out to investigate the effect of local excitation along the nanowire on the I-V characteristics. Simulated band profiles and electric field distributions support our interpretation of the experiments. Our results provide important insight for optimization of avalanche photodetector devices based on III-V nanowires.
|
|
| 5. |
- Jeddi Abdarloo, Hossein, Doktorand, 1992-, et al.
(author)
-
Enhanced LWIR response of InP/InAsP quantum discs-in-nanowire array photodetectors by photogating and ultra-thin ITO contacts
- 2024
-
In: Nanotechnology. - Bristol : Institute of Physics Publishing (IOPP). - 0957-4484 .- 1361-6528. ; 35:21, s. 1-7
-
Journal article (peer-reviewed)abstract
- Here we report on an experimental and theoretical investigation of the long-wavelength infrared (LWIR) photoresponse of photodetectors based on arrays of three million InP nanowires with axially embedded InAsP quantum discs. An ultra-thin top indium tin oxide contact combined with a novel photogating mechanism facilitates an improved LWIR normal incidence sensitivity in contrast to traditional planar quantum well photodetectors. The electronic structure of the quantum discs, including strain and defect-induced photogating effects, and optical transition matrix elements were calculated by an 8-band k center dot p simulation along with solving drift-diffusion equations to unravel the physics behind the generation of narrow linewidth intersubband signals observed from the quantum discs © 2024 The Author(s). Published by IOP Publishing Ltd.
|
|
| 6. |
- Jeddi Abdarloo, Hossein, Doktorand, 1992-, et al.
(author)
-
Spectrally Tunable Broadband Gate-All-Around InAsP/InP Quantum Discs-in-Nanowire Array Phototransistors with a High Gain-Bandwidth Product
- 2023
-
In: ACS Photonics. - Washington, DC : American Chemical Society (ACS). - 2330-4022. ; 10:6, s. 1748-1755
-
Journal article (peer-reviewed)abstract
- High-performance broadband photodetectors offering spectral tunability and a high gain-bandwidth product are crucial in many applications. Here, we report on a detailed experimental and theoretical study of three-terminal phototransistors comprised of three million InP nanowires with 20 embedded InAsP quantum discs in each nanowire. A global, transparent ITO gate all around the nanowires facilitates a radial control of the carrier concentration by more than two orders of magnitude. The transfer characteristics reveal two different transport regimes. In the subthreshold region, the photodetector operates in a diffusion mode with a distinct onset at the bandgap of InP. At larger gate biases, the phototransistor switches to a drift mode with a strong contribution from the InAsP quantum discs. Besides an unexpected spectral tunability, the detector exhibits a state-of-the-art responsivity, reaching around 100 A/W (638 nm/20 μW) @ VGS = 1.0 V/VDS = 0.5 V with a gain-bandwidth product of around 1 MHz, in excellent agreement with a comprehensive real-device model. © 2023 The Authors. Published by American Chemical Society.
|
|
| 7. |
- Jeddi, Hossein, et al.
(author)
-
Gain and bandwidth of InP nanowire array photodetectors with embedded photogated InAsP quantum discs
- 2021
-
In: Nanoscale. - Cambridge : Royal Society of Chemistry (RSC). - 2040-3364 .- 2040-3372. ; 13:12, s. 6227-6233
-
Journal article (peer-reviewed)abstract
- Here we report on the experimental results and advanced self-consistent real device simulations revealing a fundamental insight into the non-linear optical response of n+-i-n+ InP nanowire array photoconductors to selective 980 nm excitation of 20 axially embedded InAsP quantum discs in each nanowire. The optical characteristics are interpreted in terms of a photogating mechanism that results from an electrostatic feedback from trapped charge on the electronic band structure of the nanowires, similar to the gate action in a field-effect transistor. From detailed analyses of the complex charge carrier dynamics in dark and under illumination was concluded that electrons are trapped in two acceptor states, located at 140 and 190 meV below the conduction band edge, at the interface between the nanowires and a radial insulating SiOx cap layer. The non-linear optical response was investigated at length by photocurrent measurements recorded over a wide power range. From these measurements were extracted responsivities of 250 A W-1 (gain 320)@20 nW and 0.20 A W-1 (gain 0.2)@20 mW with a detector bias of 3.5 V, in excellent agreement with the proposed two-trap model. Finally, a small signal optical AC analysis was made both experimentally and theoretically to investigate the influence of the interface traps on the detector bandwidth. While the traps limit the cut-off frequency to around 10 kHz, the maximum operating frequency of the detectors stretches into the MHz region.
|
|
| 8. |
- Nowzari, Ali, et al.
(author)
-
A Comparative Study of Absorption in Vertically and Laterally Oriented InP Core–Shell Nanowire Photovoltaic Devices
- 2015
-
In: Nano letters (Print). - Washington : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 15:3, s. 1809-1814
-
Journal article (peer-reviewed)abstract
- We have compared the absorption in InP core-shell nanowire p-i-n junctions in lateral and vertical orientation. Arrays of vertical core-shell nanowires with 400 nm pitch and 280 nm diameter, as well as corresponding lateral single core-shell nanowires, were configured as photovoltaic devices. The photovoltaic characteristics of the samples, measured under 1 sun illumination, showed a higher absorption in lateral single nanowires compared to that in individual vertical nanowires, arranged in arrays with 400 nm pitch. Electromagnetic modeling of the structures confirmed the experimental observations and showed that the absorption in a vertical nanowire in an array depends strongly on the array pitch. The modeling demonstrated that, depending on the array pitch, absorption in a vertical nanowire can be lower or higher than that in a lateral nanowire with equal absorption predicted at a pitch of 510 nm for our nanowire geometry. The technology described in this Letter facilitates quantitative comparison of absorption in laterally and vertically oriented core-shell nanowire p-i-n junctions and can aid in the design, optimization, and performance evaluation of nanowire-based core-shell photovoltaic devices. © 2014 American Chemical Society.
|
|
