| 1. |
- Jiao, Mingzhi, et al.
(författare)
-
Influence of annealing temperature on theperformance and stability of on-chip hydrothermally grown ZnO nanorod gassensor toward NO2
- 2018
-
Ingår i: Academia Journal of Scientific Research. - 2315-7712. ; 6:5, s. 180-189
-
Tidskriftsartikel (refereegranskat)abstract
- Nanorod-based gas sensors synthesized at low temperature should generally be stabilized by anneling before usage. However, the influence of annealing on the sensing performance and stability of these nanorods is rarely reported. In this study, we first fabricated gas sensors based on ZnO nanorods grown on-chip on glass substrate using hydrothermal method. Subsequently, these sensors were annealed at either 400 °C, 500 °C, or 600 °C in air for 4 h. The gas-sensing performance of the ZnO nanorods toward NO2 was tested before and after annealing. The sensitivity of the gas sensors to NO2 decreased, but the stability increased with the increase in annealing temperature. Photoluminescence spectroscopy and X-ray diffraction were used to investigate the material structure of ZnO nanorods. Results revealed that the oxygen-atom-related defects in the ZnO lattice in the region close to the surface influenced by annealing process were the most significant factors on the sensing properties and stability of ZnO nanorods.
|
|
| 2. |
|
|
| 3. |
- Tan, Ha Minh, 1989-, et al.
(författare)
-
Self-heating Effect on Tin Oxide Nanowire Network Gas Sensor
- 2014
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Self-heated gas sensors have attracted much of interests owing to the ultra-low power consumption as well as simple device fabrication. However, it still requires further improvement to overcome some technical difficulties such as high operation voltage, long-term stability, and mass production. In this work, we propose a nanowire nework structure to solve these problems. The self-heating effect on fabricated structures was tested and working temperature was evaluated by base resistance measurement and infrared emission microscopy methods. The fabricated sensor consumed an electric power of about 40 mW to reach the working temperature up to 250 oC. The NO2 sensing properties were initially studied on this sensor structure.
|
|
