| 1. |
- Piscitelli, Francesco, et al.
(författare)
-
Neutron reflectometry on highly absorbing films and its application to (B4C)-B-10-based neutron detectors
- 2016
-
Ingår i: Royal Society of London. Proceedings A. Mathematical, Physical and Engineering Sciences. - : The Royal Society. - 1364-5021 .- 1471-2946. ; 472:2185
-
Tidskriftsartikel (refereegranskat)abstract
- Neutron reflectometry is a powerful tool used for studies of surfaces and interfaces. The absorption in the typical studied materials is neglected and this technique is limited only to the reflectivity measurement. For strongly absorbing nuclei, the absorption can be directly measured by using the neutron-induced fluorescence technique which exploits the prompt particle emission of absorbing isotopes. This technique is emerging from soft matter and biology where highly absorbing nuclei, in very small quantities, are used as a label for buried layers. Nowadays, the importance of absorbing layers is rapidly increasing, partially because of their application in neutron detection; a field that has become more active also due to the He-3-shortage. We extend the neutron-induced fluorescence technique to the study of layers of highly absorbing materials, in particular (B4C)-B-10. The theory of neutron reflectometry is a commonly studied topic; however, when a strong absorption is present the subtle relationship between the reflection and the absorption of neutrons is not widely known. The theory for a general stack of absorbing layers has been developed and compared to measurements. We also report on the requirements that a (B4C)-B-10 layer must fulfil in order to be employed as a converter in neutron detection.
|
|
| 2. |
- Reifarth, R., et al.
(författare)
-
Nuclear astrophysics with radioactive ions at FAIR
- 2016
-
Ingår i: Journal of Physics: Conference Series. - : IOP Publishing. - 1742-6588 .- 1742-6596. ; 665:1
-
Konferensbidrag (refereegranskat)abstract
- The nucleosynthesis of elements beyond iron is dominated by neutron captures in the s and r processes. However, 32 stable, proton-rich isotopes cannot be formed during those processes, because they are shielded from the s-process flow and r-process beta-decay chains. These nuclei are attributed to the p and rp process. For all those processes, current research in nuclear astrophysics addresses the need for more precise reaction data involving radioactive isotopes. Depending on the particular reaction, direct or inverse kinematics, forward or time-reversed direction are investigated to determine or at least to constrain the desired reaction cross sections. The Facility for Antiproton and Ion Research (FAIR) will offer unique, unprecedented opportunities to investigate many of the important reactions. The high yield of radioactive isotopes, even far away from the valley of stability, allows the investigation of isotopes involved in processes as exotic as the r or rp processes.
|
|
| 3. |
- Abulaiti, Yiming, et al.
(författare)
-
Search for the Standard Model Higgs boson produced by vector-boson fusion and decaying to bottom quarks in root s=8TeV pp collisions with the ATLAS detector
- 2016
-
Ingår i: Journal of High Energy Physics (JHEP). - : Springer. - 1126-6708 .- 1029-8479. ; :11
-
Tidskriftsartikel (refereegranskat)abstract
- A search with the ATLAS detector is presented for the Standard Model Higgs boson produced by vector-boson fusion and decaying to a pair of bottom quarks, using 20.2 fb(-1) of LHC proton-proton collision data at root s - 8 TeV. The signal is searched for as a resonance in the invariant mass distribution of a pair of jets containing b-hadrons in vector-boson-fusion candidate events. The yield is measured to be -0.8 +/- 2.3 times the Standard Model cross-section for a Higgs boson mass of 125 GeV. The upper limit on the cross-section times the branching ratio is found to be 4.4 times the Standard Model cross-section at the 95% confidence level, consistent with the expected limit value of 5.4 (5.7) in the background-only (Standard Model production) hypothesis.
|
|
| 4. |
- Höglund, Carina, et al.
(författare)
-
Stability of (B4C)-B-10 thin films under neutron radiation
- 2015
-
Ingår i: Radiation Physics and Chemistry. - : Elsevier BV. - 0969-806X .- 1879-0895. ; 113, s. 14-19
-
Tidskriftsartikel (refereegranskat)abstract
- Thin films of (B4C)-B-10 have shown to be very suitable as neutron-converting material in the next generation of neutron detectors, replacing the previous predominantly used He-3. In this contribution we show under realistic conditions that (B4C)-B-10 films are not damaged by the neutron irradiation and interactions, which they will be exposed to under many years in a neutron detector. 1 mu m thick (B4C)-B-10 thin films were deposited onto Al or Si substrates using dc magnetron sputtering. As-deposited films were exposed to a cold neutron beam with fluences of up to 1.1 x 10(14) cm(-2) and a mean wavelength of 6.9 angstrom. Both irradiated and as-deposited reference samples were characterized with time-of-flight elastic recoil detection analysis, scanning electron microscopy, transmission electron microscopy, X-ray photoemission spectroscopy, and X-ray diffraction. We show that only 1.8 ppm of the B-10 atoms were consumed and that the film composition does not change by the neutron interaction within the measurement accuracy. The irradiation does not deteriorate the film adhesion and there is no indication that it results in increased residual stress values of the as-deposited films of 0.095 GPa. From what is visible with the naked eye and down to atomic level studies, no change from the irradiation could be found using the above-mentioned characterization techniques. (C) 2015 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
|
|
| 5. |
- Khaplanov, A., et al.
(författare)
-
Neutron beam monitors for the European spallation source
- 2015
-
Ingår i: 2015 IEEE Nuclear Science Symposium and Medical Imaging Conference, NSS/MIC 2015. - : Institute of Electrical and Electronics Engineers (IEEE). - 9781467398626
-
Konferensbidrag (refereegranskat)abstract
- The European Spallation Source (ESS), currently under construction in Lund, Sweden, will house a suite of 16 user instruments for neutron scattering experiments. The spallation source of the ESS will emit relatively long, 2.8 ms, neutron pulses with an integrated flux that will greatly exceed that of current facilities. This leads to both large advancements in instrument performance as well as to increased length and complexity of the beam delivery systems. The instruments will each be equipped with neutron beam monitors used for data normalisation and analysis, as well as commissioning and diagnostics. In this paper we present the requirements for beam monitors for the ESS and the strategy to meet these in a standardised approach. A large range of specifications in efficiency, dynamic range, time and position resolution, compatible materials are needed. A new feature for neutron beam monitors for some locations, is the ability to measure time profile of each source pulse individually. In general, event mode readout will be used for monitors, similarly to other neutron detectors at the facility. A selection of detectors based on different technologies will be available. Monitors will be integrated with beam lines and choppers in a way that allows to freely choose the type of monitor based on final requirements of an instrument. For this end, space for a standardised module, housing a monitor will be provided in conjunction with chopper assemblies and elsewhere on each beam line.
|
|
| 6. |
- Castleton, Christopher, 1969-, et al.
(författare)
-
Managing the supercell approximation for charged defects in semiconductors : Finite-size scaling, charge correction factors, the band-gap problem, and the ab initio dielectric constant
- 2006
-
Ingår i: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 73:035215, s. 11-
-
Tidskriftsartikel (refereegranskat)abstract
- The errors arising in ab initio density functional theory studies of semiconductor point defects using the supercell approximation are analyzed. It is demonstrated that (a) the leading finite size errors are inverse linear and inverse cubic in the supercell size and (b) finite size scaling over a series of supercells gives reliable isolated charged defect formation energies to around +-0.05 eV. The scaled results are used to test three correction methods. The Makov-Payne method is insufficient, but combined with the scaling parameters yields an ab initio dielectric constant of 11.6+-4.1 for InP. Gamma point corrections for defect level dispersion are completely incorrect, even for shallow levels, but realigning the total potential in real-space between defect and bulk cells actually corrects the electrostatic defect-defect interaction errors as well. Isolated defect energies to +-0.1 eV are then obtained using a 64 atom supercell, though this does not improve for larger cells. Finally, finite size scaling of known dopant levels shows how to treat the band gap problem: in < or = 200 atom supercells with no corrections, continuing to consider levels into the theoretical conductin band (extended gap) comes closest to experiment. However, for larger cells or when supercell approximation errors are removed, a scissors scheme stretching the theoretical band gap onto the experimental one is in fact correct.
|
|
| 7. |
|
|
| 8. |
- Nafari, Alexandra, 1980, et al.
(författare)
-
MEMS Sensor for in Situ TEM Atomic Force Microscopy
- 2008
-
Ingår i: Journal of microelectromechanical systems. - : IEEE Press. - 1057-7157 .- 1941-0158. ; 17:2, s. 328-333
-
Tidskriftsartikel (refereegranskat)abstract
- Here, we present a MEMS atomic force microscope sensor for use inside a transmission electron microscope (TEM). This enables direct in situ TEM force measurements in the nanonewton range and thus mechanical characterization of nanosized structures. The main design challenges of the system and sensor are to reach a high sensitivity and to make a compact design that allows the sensor to be fitted in the narrow dimensions of the pole gap inside the TEM. In order to miniaturize the sensing device, an integrated detection with piezoresistive elements arranged in a full Wheatstone bridge was used. Fabrication of the sensor was done using standard micromachining techniques, such as ion implantation, oxide growth and deep reactive ion etch. We also present in situ TEM force measurements on nanotubes, which demonstrate the ability to measure spring constants of nanoscale systems.
|
|
| 9. |
- Wiedorn, Max O., et al.
(författare)
-
Megahertz serial crystallography
- 2018
-
Ingår i: Nature Communications. - : Nature Publishing Group. - 2041-1723. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- The new European X-ray Free-Electron Laser is the first X-ray free-electron laser capable of delivering X-ray pulses with a megahertz inter-pulse spacing, more than four orders of magnitude higher than previously possible. However, to date, it has been unclear whether it would indeed be possible to measure high-quality diffraction data at megahertz pulse repetition rates. Here, we show that high-quality structures can indeed be obtained using currently available operating conditions at the European XFEL. We present two complete data sets, one from the well-known model system lysozyme and the other from a so far unknown complex of a beta-lactamase from K. pneumoniae involved in antibiotic resistance. This result opens up megahertz serial femtosecond crystallography (SFX) as a tool for reliable structure determination, substrate screening and the efficient measurement of the evolution and dynamics of molecular structures using megahertz repetition rate pulses available at this new class of X-ray laser source.
|
|
| 10. |
- Croci, Gabriele, et al.
(författare)
-
A high-efficiency thermal neutron detector based on thin 3D (B4C)-B-10 converters for high-rate applications
- 2018
-
Ingår i: Europhysics letters. - : IOP Publishing. - 0295-5075 .- 1286-4854. ; 123:5
-
Tidskriftsartikel (refereegranskat)abstract
- new position-sensitive thermal neutron detector based on boron-coated converters has been developed as an alternative to today's standard He-3-based technology for application to thermal neutron scattering. The key element of the development is a novel 3D (B4C)-B-10 converter which has been ad hoc designed and realized with the aim of combining a high neutron conversion probability via the B-10(n, alpha)(7) Li reaction together with an efficient collection of the produced charged particles. The developed 3D converter is composed of thin aluminium grids made by a micro-waterjet technique and coated on both sides with a thin layer of( 10)B(4)C. When coupled to a GEM detector this converter allows reaching neutron detection efficiencies close to 50% at neutron wavelengths equal to 4 angstrom. In addition, the new detector features a spatial resolution of about 5 min and can sustain counting rates well in excess of 1 MHz/cm(2). The newly developed neutron detector will enable time-resolved measurements of different kind of samples in neutron scattering experiments at high flux spallation sources and can find a use in applications where large areas and custom geometries of thermal neutron detectors are foreseen.
|
|
