| 1. |
- Sopher, Daniel
(författare)
-
Characterization of the structure, stratigraphy and CO2 storage potential of the Swedish sector of the Baltic and Hanö Bay basins using seismic reflection methods
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- An extensive multi-channel seismic dataset acquired between 1970 and 1990 by Oljeprospektering AB (OPAB) has recently been made available by the Geological Survey of Sweden (SGU). This thesis summarizes four papers, which utilize this largely unpublished dataset to improve our understanding of the geology and CO2 storage capacity of the Baltic and Hanö Bay basins in southern Sweden.A range of new processing workflows were developed, which typically provide an improvement in the final stacked seismic image, when compared to the result obtained with the original processing. A method was developed to convert scanned images of seismic sections into SEGY files, which allows large amounts of the OPAB dataset to be imported and interpreted using modern software. A new method for joint imaging of multiples and primaries was developed, which is shown to provide an improvement in signal to noise for some of the seismic lines within the OPAB dataset. For the first time, five interpreted regional seismic profiles detailing the entire sedimentary sequence within these basins, are presented. Depth structure maps detailing the Outer Hanö Bay area and the deeper parts of the Baltic Basin were also generated. Although the overall structure and stratigraphy of the basins inferred from the reprocessed OPAB dataset are consistent with previous studies, some new observations have been made, which improve the understanding of the tectonic history of these basins and provide insight into how the depositional environments have changed throughout time. The effective CO2 storage potential within structural and stratigraphic traps is assessed for the Cambrian Viklau, När and Faludden sandstone reservoirs. A probabilistic methodology is utilized, which allows a robust assessment of the storage capacity as well as the associated uncertainty. The most favourable storage option in the Swedish sector of the Baltic Basin is assessed to be the Faludden stratigraphic trap, which is estimated to have a mid case (P50) storage capacity of 3390 Mt in the deeper part of the basin, where CO2 can be stored in a supercritical phase.
|
|
| 2. |
- Lorenz, Henning, Dr. 1972-, et al.
(författare)
-
COSC-2 – drilling the basal décollement and underlying margin of palaeocontinent Baltica in the Paleozoic Caledonide Orogen of Scandinavia
- 2022
-
Ingår i: Scientific Drilling. - Göttingen : Copernicus Publications. - 1816-8957 .- 1816-3459. ; 30, s. 43-57
-
Tidskriftsartikel (refereegranskat)abstract
- Abstract.The Collisional Orogeny in the Scandinavian Caledonides (COSC) scientific drilling project aims to characterise the structure and orogenic processes involved in a major collisional mountain belt by multidisciplinary geoscientific research. Located in western central Sweden, the project has drilled two fully cored deep boreholes into the bedrock of the deeply eroded Early Paleozoic Caledonide Orogen. COSC-1 (2014) drilled a subduction-related allochthon and the associated thrust zone. COSC-2 (2020, this paper) extends this section deeper through the underlying nappes (Lower Allochthon), the main Caledonian décollement, and the upper kilometre of basement rocks. COSC-2 targets include the characterisation of orogen-scale detachments, the impact of orogenesis on the basement below the detachment, and the Early Paleozoic palaeoenvironment on the outer margin of palaeocontinent Baltica. This is complemented by research on heat flow, groundwater flow, and the characterisation of the microbial community in the present hard rock environment of the relict mountain belt. COSC-2 successfully, and within budget, recovered a continuous drill core to 2276 m depth. The retrieved geological section is partially different from the expected geological section with respect to the depth to the main décollement and the expected rock types. Although the intensity of synsedimentary deformation in the rocks in the upper part of the drill core might impede the analysis of the Early Paleozoic palaeoenvironment, the superb quality of the drill core and the borehole will facilitate research on the remaining targets and beyond. Protocols for sampling in the hard rock environment and subsequent sample preservation were established for geomicrobiological research and rock mechanical testing. For the former, a sparse sample series along the entire drill core was taken, while the target of the latter was the décollement. COSC-2 was surveyed by a comprehensive post-drilling downhole logging campaign and a combined borehole/land seismic survey in autumn 2021. This paper provides an overview of the COSC-2 (International Continental Scientific Drilling Project – ICDP 5054_2_A and 5054_2_B boreholes) operations and preliminary results. It will be complemented by a detailed operational report and data publication.
|
|
| 3. |
- Salas Romero, Silvia
(författare)
-
Multidisciplinary Near-Surface Investigation of a Quick-Clay Landslide Prone Area in Southwest Sweden
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Quick-clay landslides are considered one of the most important geohazards in Sweden, Norway, and Canada. The deposits involved are glacial and postglacial clays and silty clays, which are very sensitive to increased stress that may collapse their structure and cause liquefaction.A multidisciplinary approach was adopted in this study of quick clays in an area of southwest Sweden that is prone to landslides. It was mainly based on geophysical methods, but was complemented and validated with geotechnical, geological, and hydrological data. Downhole geophysics, land and river reflection seismics, radio magnetotellurics, P-wave refraction tomography, magnetics, and multichannel analysis of surface waves comprised the main geophysical methods used in this research. Laboratory measurements of core samples, such as grain size analysis, mineral magnetic properties, fossil content, X-ray fluorescence, cation exchange capacity, X-ray powder diffraction, electrical conductivity, and pH were also taken. Hydrological modelling was used to obtain information on the properties of groundwater within a coarse-grained layer, given the importance of this information in the formation of quick clays.The evaluation of the physico-chemical properties of the coarse-grained layer revealed high values of magnetic susceptibility, probably as a result of fluvial sorting, which tends to accumulate denser minerals such as magnetite. Potential quick clays were visually observed above this layer, and their presence was also confirmed by geotechnical data acquired in previous studies. Marine fossils identified within the coarse-grained layer confirmed the glaciomarine origin of the clays. Geophysical results revealed the presence of large-scale structures, an undulating fractured bedrock and a coarse-grained layer sandwiched between clay deposits, with leached sediments on top and unleached sediments below. This layer, important for the development of quick clays in the area, was 3D modelled in a regional context. Magnetic data also revealed that the coarse-grained layer together with quick clays, have the potential to act as a sliding prone layer. Multichannel analysis of surface waves helped to geotechnically characterize the area. Although the results could not reach the deeper layers, it did yield information about the shallower layers of clay, silt and sand. The VS30 values indicated the presence of soft soils, as well as soft clays/silts with high plasticity index and high water content.This PhD is expected to improve the current knowledge of quick-clay landslides and how they are preconditioned. Climate change will probably affect the study area in the near future, most likely increasing landslide risk, therefore, research should continue and advance to new levels. Application of other geophysical methods such as borehole or geophysical monitoring, and induced polarization, could provide more information about the formation of quick clays and associated landslides.
|
|
| 4. |
- Sopher, Daniel, et al.
(författare)
-
The structure and stratigraphy of the sedimentary succession in the Swedish sector of the Baltic Basin : new insights from vintage 2D marine seismic data
- 2016
-
Ingår i: Tectonophysics. - : Elsevier BV. - 0040-1951 .- 1879-3266. ; 676, s. 90-111
-
Tidskriftsartikel (refereegranskat)abstract
- We present five interpreted regional seismic profiles, describing the full sedimentary sequence across the Swedish sector of the Baltic Sea. The data for the study are part of an extensive and largely unpublished 2D seismic dataset acquired between 1970 and 1990 by the Swedish Oil Prospecting Company (OPAB). The Baltic Basin is an intracratonic basin located in northern Europe. Most of the Swedish sector of the basin constitutes the NW flank of a broad synclinal depression, the Baltic Basin. In the SW of the Swedish sector lies the Hand Bay Basin, formed by subsidence associated with inversion of the Tornquist Zone during the Late Cretaceous. The geological history presented here is broadly consistent with previously published works. We observe an area between the Hand Bay and the Baltic Basin where the Palaeozoic strata has been affected by transpression and subsequent inversion, associated with the Tornquist Zone during the late Carboniferous-Early Permian and Late Cretaceous, respectively. We propose that the Christianso High was a structural low during the Late Jurassic, which was later inverted in the Late Cretaceous. We suggest that a fan shaped feature in the seismic data, adjacent to the Christianso, Fault within the Hand Bay Basin, represents rapidly deposited, coarse-grained sediments eroded from the inverted Christianso High during the Late Cretaceous. We identify a number of faults within the deeper part of the Baltic Basin, which we also interpret to be transpressional in nature, formed during the Caledonian Orogeny in the Late Silurian-Early Devonian. East of Gotland a number of sedimentary structures consisting of Silurian carbonate reefs and Ordovician carbonate mounds, as well as a large Quaternary glacial feature are observed. Finally, we use the seismic interpretation to infer the structural and stratigraphic history of the Baltic and Hand Bay basins within the Swedish sector.
|
|
| 5. |
|
|
| 6. |
- Levendal, Tegan Corinne, et al.
(författare)
-
Ordovician carbonate mud mounds of the Baltoscandian Basin in time and space : a geophysical approach
- 2019
-
Ingår i: Palaeogeography, Palaeoclimatology, Palaeoecology. - : Elsevier. - 0031-0182 .- 1872-616X. ; 535
-
Tidskriftsartikel (refereegranskat)abstract
- Carbonate mud mounds developed within the Baltoscandian Basin, an epicratonic basin on the Baltica palaeocontinent, during the Ordovician. In the Upper Ordovician succession of the Baltoscandian Basin, a large number of mud mounds are present at three stratigraphic levels namely, the Kullsbergs mounds (late Sandbian-early Katian), Nabala and Rakvere mounds (middle Katian), and the Boda mounds (late Katian). These formed in a subtropical-tropical carbonate platform environment, covered by a shallow epicontinental sea. The mud mounds at these stratigraphic levels beneath and around Gotland have been characterized using a comprehensive seismic and well dataset acquired during a period of hydrocarbon exploration and exploitation which began more than 30 years ago. Interpretation of the largely unpublished seismic data in this study provides details on the distribution of mound complexes in the basin and constraints on the geometry of the mounds. Detailed structure contour maps of the top and the base of the Ordovician succession beneath Gotland based on the seismic interpretation are presented. The results give a comprehensive characterization of carbonate mud mound generation on Gotland which may help in understanding the distribution patterns of similar mound complexes in other parts of the Ordovician world formed in similar environments.
|
|
| 7. |
- Muhamad, Harbe
(författare)
-
Geophysical studies in the western part of the Siljan Ring Impact Crater
- 2017
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- This thesis utilizes several geophysical methods to study the Siljan Ring impact structure, focusing on the western part of the structure. This thesis, and the three papers upon which it is based, reports on attempts to delineate the Paleozoic rocks at depth within the annular ring graben and characterize their structure. In addition, the nature of the basement, which underlies these sedimentary rocks is investigated.Papers I and III focus on analysis of the down-hole logging and borehole core data. As well as the acquisition, processing and interpretation of 2D high-resolution reflection seismic data from the Mora area. The borehole log responses were compared with the core lithology from the Mora 001 borehole and information from two other cores (Mora VM 2 and Mora MV 3) in order to interpret the logs. The logs reveal significant changes in the lithology between boreholes, indicating a very high level of structural complexity, which is attributed to impact tectonics. In addition, the log data revealed a high sonic velocity contrast between the Silurian and Ordovician successions and a higher apparent temperature gradient than in the northern part of the structure. The interpretation of the high-resolution 2D seismic data suggest that the Mora area has been significantly affected by the impact. Several potential faults were identified in the area and interpreted to be post depositional and related to the impact. In paper II, a 2D seismic profile from the Orsa area (12 km) located in the northwestern part of the Siljan Ring was re-processed. To compliment this seismic line, first break traveltime tomography results, vintage seismic OPAB profiles, new and pre-existing gravity data, aeromagnetic data and the bedrock geological map were used to present a geological model along the Orsa profile. Reprocessing of the seismic data resulted in improved stacked and migrated sections and better imaging of the top of the crystalline basement than the original processing. Integrated interpretation of the seismic profiles suggests that the area has been significantly affected by faulting and that the depth to the basement varies greatly along the different profiles.
|
|
| 8. |
- Sopher, Daniel, et al.
(författare)
-
Quantitative assessment of seismic source performance : Feasibility of small and affordable seismic sources for long term monitoring at the Ketzin CO2 storage site, Germany
- 2014
-
Ingår i: Journal of Applied Geophysics. - 0926-9851 .- 1879-1859. ; 107, s. 171-186
-
Tidskriftsartikel (refereegranskat)abstract
- We apply a range of quantitative pre-stack analysis techniques to assess the feasibility of using smaller and cheaper seismic sources, than those currently used at the Ketzin CO2 storage site. Results from two smaller land sources are presented alongside those from a larger, more powerful source, typically utilized for seismic acquisition at the Ketzin. The geological target for the study is the Triassic Stuttgart Formation which contains a saline aquifer currently used for CO2 storage. The reservoir lies at a depth of approximately 630 m, equivalent to a travel time of 500 ms along the study profile. The three sources discussed in the study are the Vibsist 3000, Vibsist 500 (using industrial hydraulic driven concrete breaking hammers) and a drop hammer source. Data were collected for the comparison using the three sources in 2011, 2012 and 2013 along a 984 m long line with 24m receiver spacing and 12 m shot spacing. Initially a quantitative analysis is performed of the noise levels between the 3 surveys. The raw shot gathers are then analyzed quantitatively to investigate the relative energy output, signal to noise ratio, penetration depth, repeatability and frequency content for the different sources. The performance of the sources is also assessed based on stacked seismic sections. Based on the results from this study it appears that both of the smaller sources are capable of producing good images of the target reservoir and can both be considered suitable as lower cost, less invasive sources for use at the Ketzin site or other shallow CO2 storage projects. Finally, the results from the various pre-stack analysis techniques are discussed in terms of how representative they are of the final stacked sections.
|
|
| 9. |
- Zhang, Fengjiao, 1981-, et al.
(författare)
-
A feasibility and efficiency study of seismic waveform inversion for time-lapse monitoring of onshore CO2 geological storage sites using reflection seismic geometry
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- The monitoring of the CO2 distribution at depth is very important for onshore geological storage of CO2. Seismic methods are effective monitoring tools during and after the injection process, but are generally expensive and time consuming to perform. In this paper we perform a series of synthetic experiments in order to compare the seismic waveform inversion method with conventional seismic monitoring methods for time-lapse monitoring at CO2 geological storage sites. We mainly focus our study on seismic data sets with typical reflection acquisition geometries, that is far offset data is limited. Three synthetic seismic data sets (consisting of one baseline and two repeats) were generated by a third party 2D forward modeling code to compare the waveform inversion method with the conventional method. The area into which CO2 is injected is on the order of a few hundred meters wide and a few 10s of meters high and can be considered as a leak. We compare the waveform inversion results and conventional time-lapse results to determine how sparse spatial sub-sampling affects the results by successively increasing both the shot and receiver spacing. Aside from testing the influence of the shot and receiver spacing on the results, we also use a coarse starting model and increase the starting frequency to make the test more realistic. Our results show that, under certain conditions concerning noise, it may be possible to use a combination of sparse spatial sampling geometries and seismic waveform inversion to monitor CO2 injection sites. Regardless, seismic waveform inversion may be a good complement to standard CDP processing when monitoring CO2 injection.
|
|
| 10. |
- Zhang, Fengjiao, 1981-, et al.
(författare)
-
Application of seismic waveform tomography to monitoring of CO2 injection : modeling and a real data example from the Ketzin site, Germany
- 2013
-
Ingår i: Geophysical Prospecting. - : Wiley-Blackwell. - 0016-8025 .- 1365-2478. ; 61:Suppl.s1, s. 284-299
-
Tidskriftsartikel (refereegranskat)abstract
- Seismic monitoring of the injected carbon dioxide (CO2) distribution at depth is an important issue in the geological storage of CO2. To help monitor changes in the subsurface during CO2 injection a series of 2D seismic surveys were acquired within the framework of the CO2SINK and CO2MAN projects at Ketzin, Germany at different stages of the injection process. Here we investigate using seismic waveform tomography as a qualitative tool for time-lapse seismic monitoring given the constraints of the limited maximum offsets of the 2D seismic data. Prior to applying the inversion to the real data we first made a number of benchmark tests on synthetic data using a similar geometry as in the real data. Results from the synthetic benchmark tests show that it is difficult to recover the true value of the velocity anomaly due to the injection, but that it is possible to qualitatively locate the distribution of the injected CO2. After the synthetic studies, we applied seismic waveform tomography on the real time-lapse data from the Ketzin site along with conventional time-lapse processing. Both methods show a similar qualitative distribution of the injected CO2 and agree well with expectations based upon more extensive 3D time-lapse monitoring in the area.
|
|
