| 1. |
- Logan, Leslie, 1992-, et al.
(författare)
-
Energy Drive for the Kiruna Mining District Mineral System(s): Insights from U-Pb Zircon Geochronology
- 2022
-
Ingår i: Minerals. - : MDPI. - 2075-163X. ; 12:7
-
Tidskriftsartikel (refereegranskat)abstract
- The Kiruna mining district, Sweden, known for the type locality of Kiruna-type iron oxide-apatite (IOA) deposits, also hosts several Cu-mineralized deposits including iron oxide-copper-gold (IOCG), exhalative stratiform Cu-(Fe-Zn), and structurally controlled to stratabound Cu +/- Au. However the relationship between the IOA and Cu-systems has not been contextualized within the regional tectonic evolution. A broader mineral systems approach is taken to assess the timing of energy drive(s) within a regional tectonic framework by conducting U-Pb zircon geochronology on intrusions from areas where Cu-mineralization is spatially proximal. Results unanimously yield U-Pb ages from the early Svecokarelian orogeny (ca. 1923-1867 Ma including age uncertainties), except one sample from the Archean basement (2698 +/- 3 Ma), indicating that a distinct thermal drive from magmatic activity was prominent for the early orogenic phase. A weighted average Pb-207/Pb-206 age of 1877 +/- 10 Ma of an iron-oxide-enriched gabbroic pluton overlaps in age with the Kiirunavaara IOA deposit and is suggested as a candidate for contributing mafic signatures to the IOA ore. The results leave the role of a late energy drive (and subsequent late Cu-mineralization and/or remobilization) ambiguous, despite evidence showing a late regional magmatic-style hydrothermal alteration is present in the district.
|
|
| 2. |
- Martinsson, Olof, et al.
(författare)
-
Metallogeny of the Northern Norrbotten Ore Province, northern Fennoscandian Shield with emphasis on IOCG and apatite-iron ore deposits
- 2016
-
Ingår i: Ore Geology Reviews. - : Elsevier BV. - 0169-1368 .- 1872-7360. ; 78, s. 447-492
-
Forskningsöversikt (refereegranskat)abstract
- The Northern Norrbotten Ore Province in northernmost Sweden includes the type localities for Kiruna-type apatite iron deposits and has been the focus for intense exploration and research related to Fe oxide-Cu-Au mineralisation during the last decades. Several different types of Fe-oxide and Cu-Au +/- Fe oxide mineralisation occur in the region and include: stratiform Cu +/- Zn +/- Pb +/- Fe oxide type, iron formations (including BIF's), Kiruna-type apatite iron ore, and epigenetic Cu +/- Au +/- Fe oxide type which may be further subdivided into different styles of mineralisation, some of them with typical IOCG (Iron Oxide-Copper-Gold) characteristics. Generally, the formation of Fe oxide +/- Cu +/- Au mineralisation is directly or indirectly dated'between-2.1 and 1.75 Ga, thus spanning about 350 m.y. of geological evolution. The current paper will present in more detail the characteristics of certain key deposits, and aims to put the global concepts of Fe-oxide Cu-Au mineralisation into a regional context. The focus will be on iron deposits and various types of deposits containing Fe-oxides and Cu-sulphides in different proportions which generally have some characteristics in common with the IOCG style. In particular, ore fluid characteristics (magmatic versus non magmatic) and new geochronological data are used to link the ore-forming processes with the overall crustal evolution to generate a metallogenetic model. Rift bounded shallow marine basins developed at similar to 2.1-2.0 Ga following a long period of extensional tectonics within the Greenstone-dominated, 2.5-2.0 Ga Karelian craton. The similar to 1.9-1.8 Ga Svecofennian Orogen is characterised by subduction and accretion from the southwest. An initial emplacement of calc-alkaline magmas into similar to 1.9 Ga continental arcs led to the formation of the Haparanda Suite and the Porphyrite Group volcanic rocks. Following this early stage of magmatic activity, and separated from it by the earliest deformation and metamorphism, more alkali-rich magmas of the Perthite Monzonite Suite and the Kiirunavaara Group volcanic rocks were formed at similar to 1.88 Ga. Subsequently, partial melting of the middle crust produced large volumes of similar to 1.85 and 1.8 Ga S-type granites in conjunction with subduction related A-/I-type magmatism and associated deformation and metamorphism. In our metallogenetic model the ore formation is considered to relate to the geological evolution as follows. Iron formations and a few stratiform sulphide deposits were deposited in relation to exhalative processes in rift bounded marine basins. The iron formations may be sub-divided into BIF-(banded iron formations) and Mg rich types, and at several locations these types grade into each other. There is no direct age evidence to constrain the deposition of iron formations, but stable isotope data and stratigraphic correlations suggest a formation within the 2.1-2.0 Ga age range. The major Kiruna-type ores formed from an iron-rich magma (generally with a hydrothermal over-print) and are restricted to areas occupied by volcanic rocks of the Kiirunavaara Group. It is suggested here that 1.89-1.88 Ga tholeiitic magmas underwent magma liquid immiscibility reactions during fractionation and interaction with crustal rocks, including metaevaporites, generating more felsic magmatic rocks and Kiruna-type iron deposits. A second generation of this ore type, with a minor economic importance, appears to have been formed about 100 Ma later. The epigenetic Cu-Au +/- Fe oxide mineralisation formed during two stages of the Svecofennian evolution in association with magmatic and metamorphic events and crustal scale shear zones. During the first stage of mineralisation, from 1.89-1.88 Ga, intrusion-related (porphyry style) mineralisation and Cu-Au deposits of IOCG affinity formed from magmatic-hydrothermal systems, whereas vein-style and shear zone deposits largely formed at c. 1.78 Ga. The large range of different Fe oxide and Cu-Au +/- Fe oxide deposits in Northern Norrbotten is associated with various alteration systems, involving e.g. scapolite, albite, K feldspar, biotite, carbonates, tourmaline and sericite. However, among the apatite iron ores and the epigenetic Cu-Au +/- Fe oxide deposits the character of mineralisation, type of ore- and alteration minerals and metal associations are partly controlled by stratigraphic position (i.e. depth of emplacement). Highly saline, NaCl + CaCl2 dominated fluids, commonly also including a CO2-rich population, appear to be a common characteristic feature irrespective of type and age of deposits. Thus, fluids with similar characteristics appear to have been active during quite different stages of the geological evolution. Ore fluids related to epigenetic Cu-Au Fe oxides display a trend with decreasing salinity, which probably was caused by mixing with meteoric water. Tentatively, this can be linked to different Cu-Au ore paragenesis, including an initial (magnetite)-pyrite-chalcopyrite stage, a main chalcopyrite stage, and a late bornite stage. Based on the anion composition and the Br/Cl ratio of ore related fluids bittern brines and metaevaporites (including scapolite) seem to be important sources to the high salinity hydrothermal systems generating most of the deposits in Norrbotten. Depending on local conditions and position in the crust these fluids generated a variety of Cu-Au deposits. These include typical IOCG-deposits (Fe-oxides and Cu-Au are part of the same process), IOCG of iron stone type (pre-existing Fe-oxide deposit with later addition of Cu-Au), IOCG of reduced type (lacking Fe-oxides due to local reducing conditions) and vein-style Cu-Au deposits. From a strict genetic point of view, IOCG deposits that formed from fluids of a mainly magmatic origin should be considered to be a different type than those deposits associated with mainly non-magmatic fluids. The former tend to overlap with porphyry systems, whereas those of a mainly non-magmatic origin overlap with sediment hosted Cu-deposits with respect to their origin and character of the ore fluids.
|
|
| 3. |
- Alakangas, Lena, et al.
(författare)
-
Norrbottens malm- och mineralresurs och dess potentiella betydelse för innovation, samhälle och miljö
- 2014
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- Gruvindustrins betydelse för samhällsutveckling och infrastruktur i Sverige och inte minst i Norrbottens län är mycket stor. De geologiska förutsättningarna att hitta nya brytvärda förekomster i Norrbotten är goda. Länet är tillsammans med Västerbotten en av Europas viktigaste regioner för utvinning av metaller. Det syns också i den nyligen framtagna regionala mineralstrategin för Norrbotten och Västerbotten. Visionen för den regionala mineralstrategin: ”Genom långsiktigt hållbart nyttjande av Norrbottens och Västerbottens läns mineralresurser har ytterligare tillväxt skapats i regionen och hela Sverige. Vi har utvecklat och stärkt vår ställning som ledande gruv- och mineralnation.”Eftersom framtidspotentialen för gruvnäringen är mycket god men okunnigheten hos både allmänhet och beslutsfattare om näringens betydelse för innovation och samhällsutveckling är stor, kopplat med en utbredd oro för miljöpåverkan, måste dessa viktiga framtidsfrågor belysas. Med finansiering från Länsstyrelsen i Norrbotten bedrevs därför under första hälften av 2014 en förstudie som syftade till att sammanfatta kunskapsläget om framtidens gruvindustri i Norrbotten. Resultaten av förstudien redovisas i den här rapporten. En viktig slutsats är att det under nästa strukturfondsperiod (med start 2015) behövs ett framtidsinriktat forskningsprogram för att belysa de möjligheter som finns. Denna förstudie utgör grund för en kommande ansökan till strukturfonderna. Kompetensen som finns vid Luleå tekniska universitet, Sveriges centrum för gruvrelaterad forskning och utbildning, bör användas för att studera troliga framtidsmöjligheter och hur de ska kunna användas för att få en så positiv utveckling som möjligt för länet. Projektet bör innehålla följande tre huvudinriktningar, som naturligtvis hör ihop:Vilka malm- och mineralresurser finns det potential för i Norrbotten, och vilka kommer sannolikt att exploateras i framtiden?Vad kommer den exploateringen att ha för betydelse för innovation och samhällsutveckling?Vad kommer den exploateringen att få för miljöeffekter och hur ska man göra för att minska miljöbelastningen?En annan slutsats är att nedlagda gruvområden inte måste ses som förstörd natur. Betydande mervärden som gruvturism skulle kunna skapas om vilja, kreativitet och beslutsamhet finns. Detta är ett givet utvecklingsområde där småföretag och entreprenörer kan göra stor insats om de politiska och myndighetsmässiga förutsättningarna finns. Dessa aspekter skulle också kunna belysas i det föreslagna forskningsprogrammet eller i ett eget projekt.
|
|
| 4. |
- Alakangas, Lena, et al.
(författare)
-
Project: Improve Resource Efficiency and Minimize Environmental Footprint
- 2016
-
Annan publikation (populärvet., debatt m.m.)abstract
- The REMinE project is organized in five work packages that comprise: detailedcharacterization and risk assessment of the mine wastes selected (WP2), identification of new processing methods for mine waste (WP3), characterization and risk assessment of the remaining residuals (WP4), outlining business opportunities and environmental impact in a conceptual model for sustainable mining (WP5). The project comprises case studies of historical mine wastes from three different European countries, namely Portugal, Romania and Sweden. The interdisciplinary research collaboration in this project is innovative in the sense that separation of minerals and extraction of metals not only are basedon technical and economic gain but also considers the environmental perspective.
|
|
| 5. |
- Edfelt, Åsa, et al.
(författare)
-
Stratigraphy and tectonic setting of the host rocks to the Tjårrojåkka Fe-oxide Cu-Au deposits, Kiruna area, northern Sweden
- 2006
-
Ingår i: GFF. - : Taylor & Francis. - 1103-5897 .- 2000-0863. ; 128:3, s. 221-232
-
Tidskriftsartikel (refereegranskat)abstract
- The Tjårrojåkka area is located about 50 km WSW of Kiruna, northern Sweden, and hosts one of the best examples of spatially and possibly genetically related Fe-oxide and Cu-Au occurrences in the area. The bedrock is dominated by intermediate and basic extrusive and intrusive rocks. An andesite constrains the ages of these rocks with a U-Pb LA-ICPMS age of 1878±7 Ma. They are cut by dolerites, which acted as feeder dykes for the overlying basalts. Based on geochemistry and the obtained age the andesites and basaltic andesites can be correlated with the 1.9 Ga intermediate volcanic rocks of the Svecofennian Porphyrite Group in northern Sweden. They formed during subduction-related magmatism in a volcanic arc environment on the Archaean continental margin above the Kiruna Greenstone Group. Chemically the basalts and associated dolerites have the same signature, but cannot directly be related to any known basaltic unit in northern Sweden. The basalts show only minor contamination of continental crust and may represent a local extensional event in a subaquatic back arc setting with extrusion of mantle derived magma. The intrusive rocks range from gabbro to quartz-monzodiorite in composition. The area is metamorphosed at epidote-amphibolite facies and has been affected by scapolite, K-feldspar, epidote, and albite alteration that is more intense in the vicinity of deformation zones and mineral deposits. Three events of deformation have been distinguished in the area. D1 brittle-ductile deformation created NE-SW-striking steep foliation corresponding with the strike of the Tjårrojåkka-Fe and Cu deposits and was followed by the development of an E-W deformation zone (D2). A compressional event (D3), possible involving thrusting from the SW, produced folds in the central part of the area and a NNW-SSE striking deformation zone in NE.
|
|
| 6. |
- Elming, Sten-åke, et al.
(författare)
-
A palaeomagnetic and geochemical study of basic intrusions in northern Sweden
- 2004
-
Ingår i: GFF. - : Informa UK Limited. - 1103-5897 .- 2000-0863. ; 126:2, s. 243-252
-
Tidskriftsartikel (refereegranskat)abstract
- A palaeomagnetic and geochemical study has been performed on basic dykes in northern Sweden. The dykes and a gabbro formation were sampled in 28 sites and characteristic magnetizations could be defined in 23 of them. The dykes form a part of a swarm that trends in NE-SW to E-W. From differences in palaeomagnetic signatures and composition it is concluded that this swarm is composed of two generations of dykes, group A and B, trending in similar directions. The dykes of group A have compositions that are similar to rapakivi related dykes, while those of group B are different from most rapakivi dykes in Fennoscandia. The calculated pole positions may suggest that the group B dykes are older than those of group A and both groups intruded within the time span 1.77 Ga to 1.50 Ga. The trend of the dykes is more or less parallell to a palaeo-compressional stress field that may be expected from the collisional tectonics related to the Gothian orogeny. The intrusion of the rapakivi formations in Fennoscandia has been suggested to be related with the Gothian orogeny and the intrusion of the dykes may thus be guided by the stress field generated by the collisional tectonics.
|
|
| 7. |
- Hällström, Lina, et al.
(författare)
-
Geochemical characterization of W, Cu and F skarn tailings at Yxsjöberg, Sweden
- 2018
-
Ingår i: Journal of Geochemical Exploration. - : Elsevier. - 0375-6742 .- 1879-1689. ; 194, s. 266-279
-
Tidskriftsartikel (refereegranskat)abstract
- Little attention has been paid to tailings from skarn ore deposits and their environmental impact, even though they can contain elevated concentrations of elements of potential concern together with sulfides and fluorite. Historical skarn tailings at Yxsjöberg, Sweden, containing e.g. Be, Bi, Cu, F, Sn, S, W, and Zn were geochemically characterized as a first step to evaluate the environmental impact and the potential to re-mine the tailings. The tailings were deposited between 1897 and 1963 in the Smaltjärnen Repository without dams or a complete cover, and have been in contact with the atmosphere for >30 years. Four vertical cores throughout the tailings were taken and divided into 134 subsamples, which were analyzed for total concentrations and paste pH. Selected samples from different depths were mineralogically characterized using optical microscopy, scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS), Raman vibrational spectroscopy, and X-ray diffraction (XRD). Minerals, hand-picked from drilled rock cores, were analyzed for the element content, and a modified Element to Mineral Conversion (EMC) that pinpoints the quantitative distribution of elements between the minerals in the tailings was carried out. The average concentrations of Be, Bi, Cu, Sn, Zn, W, F and S in the tailings were 284, 495, 946, 559, 301, and 960 ppm, and 1.9 and 1.2 wt%, respectively. The tailings has reached a late stage development due to pyrrhotite oxidation resulting in low pH (<4) in the uppermost tailings, and formations of secondary minerals such as gypsum, hydrous ferric oxides (HFO) and orthogonal calcite. Secondary pyrite and magnetite, formed from monoclinic pyrrhotite was detected, and different weathering rates of secondary pyrite, hexagonal and monoclinic pyrrhotite was indicated, with secondary pyrite as the most stable and monoclinic pyrrhotite as the least. The rare and easily-weathered mineral danalite (Fe4Be3(SiO4)3S) was found in the drilled rock cores and by XRD in the tailings. However, the mineral could not be found by optical microscopy or SEM-EDS. This suggests that the mineral has been weathered to a great extent, which poses a high risk of releasing elements of potential concern to the groundwater since danalite contains approximately 40% of the total Be and Zn concentrations in the tailings. Fluorine was mainly found in fluorite, Cu in chalcopyrite, and Bi in bismuthinite; which all showed signs of weathering in acidic condition in the uppermost part, subsequent with decreased concentrations, followed by accumulation peaks deeper down in the tailings correlated with Al. Tungsten was mainly found in scheelite; most grains were unweathered, but a few grains had altered rims or HFO on the mineral surfaces. Tin was mainly found in ferrohornblende, hedenbergite and grossular. Beryllium, Cu, F, and Zn has high potential to be released to the surrounding environment from the Smaltjärnen Repository, while W, Bi and Sn are relatively stable in the tailings. Most of the scheelite is intact and re-mining could, therefore, be a suitable remediation method that would both reduce the environmental impact and simultaneously support the supply of critical raw materials in the EU.
|
|
| 8. |
- Hällström, Lina P.B., et al.
(författare)
-
The geochemical behaviour of Be and F in historical mine tailings of Yxsjöberg, Sweden
- 2020
-
Ingår i: Journal of Geochemical Exploration. - : Elsevier. - 0375-6742 .- 1879-1689. ; 218
-
Tidskriftsartikel (refereegranskat)abstract
- The speciation, mobility, transport, and fate of beryllium (Be) in the terrestrial environment is poorly studied even though it is considered to be one of the most hazardous elements in the periodic table. Historical tailings containing the unusual mineral danalite [Be3(Fe4.4Mn0.95Zn0.4)(SiO4)3.2S1.4] together with Fe-sulfides and fluorite has been stored open to the atmosphere for more than 50y. Environmental mineralogy, which combines geochemical and mineralogical techniques, was used to elucidate the weathering of danalite and fluorite. Danalite is unstable in oxic conditions due to the occurrence of Fe(II) and S-(II) in the crystal lattice and has oxidized at the same pace as pyrrhotite in the tailings. The acidic conditions generated from sulfide oxidation and the release of F from fluorite weathering have most likely enhanced Be mobility in the tailings. Secondary gypsum, hydrous ferric oxides and Al-oxyhydroxides are hypothesized to have played an important role regarding the mobility of Be in the tailings. The results indicate that Be released from danalite was first scavenged by these secondary minerals through co-precipitation. However, the dissolution of secondary gypsum due to changing geochemical conditions has also released Be to the groundwater. The groundwater at the shore of the tailings revealed the highest Be concentrations measured anywhere in the world (average: 4.5 mg/L) even though the water has a circumneutral pH. This extraordinary finding can be explained by high concentrations of F (73 mg/L), as F and Be have been shown to form strong complexes. The weathering of danalite and fluorite will continue for hundreds of years if remediation measures are not taken. Re-mining the tailings could be an appropriate remediation method.
|
|
| 9. |
- Hällström, Lina, et al.
(författare)
-
Scheelite weathering and tungsten (W) mobility in historical oxidic-sulfidic skarn tailings at Yxsjöberg, Sweden
- 2020
-
Ingår i: Environmental Science and Pollution Research. - : Springer. - 0944-1344 .- 1614-7499. ; 27:6, s. 6180-6192
-
Tidskriftsartikel (refereegranskat)abstract
- More knowledge of the geochemical behavior of tungsten (W) and associated contamination risks is needed. Therefore, weathering of scheelite (CaWO4) and secondary sequestration and transport of W to groundwater in historical skarn tailings and surface water downstream of the tailings were studied. The tailings contained 920 mg/kg W, primarily in scheelite. Mineralogical and geochemical analyses were combined to elucidate the geochemical behavior of W in the tailings, and water samples were taken monthly during 2018 to monitor its mobility. In the tailings, a large peak of W was found at 1.5 m depth. There, 30 wt%. of W was present in easily reducible phases, indicating former scheelite weathering. Currently, W is being released from scheelite to water-soluble phases at 2.5 m depth. The release of WO42− is hypothetically attributed to anion exchange with CO32− released from calcite neutralizing acid produced from pyrrhotite oxidation in the upper tailings and transported downwards to pH conditions > 7. Higher concentrations of dissolved W were found in the groundwater and particulate W in downstream surface water than in reference water, but they were lower than current contamination thresholds. Tungsten showed correlations with hydrous ferric oxides (HFO) in both the tailings and surface water.
|
|
| 10. |
- Malinovskiy, Dmitry, et al.
(författare)
-
Variations in the isotopic composition of molybdenum in freshwater lake systems
- 2007
-
Ingår i: Chemical Geology. - : Elsevier BV. - 0009-2541 .- 1872-6836. ; 236:3-4, s. 181-198
-
Tidskriftsartikel (refereegranskat)abstract
- Variations in molybdenum isotopic composition, spanning the range of ≈ 2.3‰ in the terms of 97Mo/95Mo ratio, have been measured in sediment cores from three lakes in northern Sweden and north-western Russia. These variations have been produced by both isotopically variable input of Mo into the lakes due to Mo isotopic heterogeneity of bedrock in the drainage basins and fractionation in the lake systems due to temporal variations in limnological conditions. Mo isotope abundances of bedrock in the lake drainage basins have been documented by analysis of Mo isotope ratios of a suite of molybdenite occurrences collected in the studied area and of detrital fractions of the lake sediment cores. The median δ97Mo value of the investigated molybdenites is 0.26‰ with standard deviation of 0.43‰ (n = 19), whereas the median δ97Mo value of detrital sediment fractions from two lakes is - 0.40‰ with standard deviation of 0.36‰ (n = 15). The isotopic composition of Mo in the sediment cores has been found to be dependent on redox conditions of the water columns and the dominant type of scavenging phases. Hydrous Fe oxides have been shown to be an efficient scavenger of Mo from porewater under oxic conditions. Oxidative precipitation of Fe(II) in the sediments resulted in co-precipitation of Mo and significant authigenic enrichment at the redox boundary. In spite of a pronounced increase in Mo concentration associated with Fe oxides at the redox boundary the isotopic composition of Mo in this zone varies insignificantly, suggesting little or no isotope fractionation during scavenging of Mo by hydrous Fe oxides. In a lake with anoxic bottom water a chironomid-inferred reconstruction of O2 conditions in the bottom water through the Holocene indicates that increased O2 concentrations are generally associated with low δ97Mo/95Mo values of the sediments, whereas lowered O2 contents of the bottom water are accompanied by relatively high δ97Mo/95Mo values, thus confirming the potential of Mo isotope data to be a proxy for redox conditions of overlying waters. However, it is pointed out that other processes including input of isotopically heterogeneous Mo and Mn cycling in the redox-stratified water column can be a primary cause of variations in Mo isotopic compositions of lake sediments.
|
|
