| 1. |
- Younesi, Reza, et al.
(författare)
-
Li-O-2 Battery Degradation by Lithium Peroxide (Li2O2): A Model Study
- 2013
-
Ingår i: Chemistry of Materials. - : American Chemical Society (ACS). - 1520-5002 .- 0897-4756. ; 25:1, s. 77-84
-
Tidskriftsartikel (refereegranskat)abstract
- The chemical stability of the Li-O-2 battery components (cathode and electrolyte) in contact with lithium peroxide (Li2O2) was investigated using X-ray photoelectron spectroscopy (XPS). XPS is a versatile method to detect amorphous as well as crystalline decomposition products of both salts and solvents. Two strategies were employed. First, cathodes including carbon, alpha-MnO2 catalyst, and Kynar binder (PVdF-HFP) were exposed to Li2O2 and LiClO4 in propylene carbonate (PC) or tetraethylene glycol dimethyl ether (TEGDME) electrolytes. The results indicated that Li2O2 degrades TEGDME to carboxylate containing species and that the decomposition products, in turn, degraded the Kynar binder. The alpha-MnO2 catalyst was unaffected. Second, Li2O2 model surfaces were kept in contact with different electrolytes to investigate the chemical stability and also the resulting surface layer on Li2O2. Further, the XPS experiments revealed that the Li salts such as LiPF6, LiBF4, and LiC!
|
|
| 2. |
- Asfaw, Habtom Desta, 1986-, et al.
(författare)
-
Nanosized LiFePO4-decorated emulsion-templated carbon foam for 3D micro batteries : a study of structure and electrochemical performance
- 2014
-
Ingår i: Nanoscale. - Royal Society of Chemistry. - 2040-3364 .- 2040-3372. ; 6:15, s. 8804-8813
-
Tidskriftsartikel (refereegranskat)abstract
- In this article, we report a novel 3D composite cathode fabricated from LiFePO4 nanoparticles deposited conformally on emulsion-templated carbon foam by a sol–gel method. The carbon foam is synthesized via a facile and scalable method which involves the carbonization of a high internal phase emulsion (polyHIPE) polymer template. Various techniques (XRD, SEM, TEM and electrochemical methods) are used to fully characterize the porous electrode and confirm the distribution and morphology of the cathode active material. The major benefits of the carbon foam used in our work are closely connected with its high surface area and the plenty of space suitable for sequential coating with battery components. After coating with a cathode material (LiFePO4nanoparticles), the 3D electrode presents a hierarchically structured electrode in which a porous layer of the cathode material is deposited on the rigid and bicontinuous carbon foam. The composite electrodes exhibit impressive cyclability and rate performance at different current densities affirming their importance as viable power sources in miniature devices. Footprint area capacities of 1.72 mA h cm−2 at 0.1 mA cm−2 (lowest rate) and 1.1 mA h cm−2 at 6 mA cm−2(highest rate) are obtained when the cells are cycled in the range 2.8 to 4.0 V vs. lithium.
|
|
| 3. |
- Asfaw, Habtom Desta, Dr. 1986-, et al.
(författare)
-
Facile synthesis of hard carbon microspheres from polyphenols for sodium-ion batteries : insight into local structure and interfacial kinetics
- 2020
-
Ingår i: Materials Today Energy. - : Elsevier BV. - 2468-6069. ; 18
-
Tidskriftsartikel (refereegranskat)abstract
- Hard carbons are the most promising negative active materials for sodium ion storage. In this work, a simple synthesis approach is proposed to produce hard carbon microspheres (CMSs) (with a mean diameter of ~1.3 μm) from resorcinol-formaldehyde precursors produced via acid-catalyzed polycondensation reaction. Samples prepared at 1200, 1400, and 1500 oC showed different electrochemical behavior in terms of reversible capacity, initial coulombic efficiency (iCE), and the mechanism of sodium ion storage. The specific capacity contributions from the flat voltage profile (<0.1 V) and the sloping voltage region (0.1–1 V) showed strong correlation to the local structure (and carbonization temperature) determined by the interlayer spacing (d002) and the Raman ID/IG ratio of the hard carbons (HCs) and the rate of cycling. Electrochemical tests indicated that the HC synthesized at 1500 oC performed best with an iCE of 85–89% and a reversible capacity of 300–340 mAh g−1 at 10 mA g−1, with the majority of charge stored below 0.1 V. The d002 and the ID/IG ratio for the sample were ~3.7 Å and ~1.27, respectively, parameters indicative of the ideal local structure in HCs required for optimum performance in sodium-ion cells. In addition, galvanostatic tests on three-electrode half-cells cells revealed that sodium metal plating occurred as cycling rates were increased beyond 80 mA g−1 leading to considerably high capacity and poor coulombic efficiency, a point that must be considered in full-cell batteries. Pairing the hard CMS electrodes with Prussian white positive electrode, a proof-of-concept cell could provide a specific capacity of almost 100 mAh g−1 maintained for more than 50 cycles with a nominal voltage of 3 V.
|
|
| 4. |
- Ma, Le Anh, et al.
(författare)
-
Na-ion mobility in P2-type Na0.5MgxNi0.17-xMn0.83O2 (0
- 2021
-
Ingår i: Physical Chemistry Chemical Physics. - : Royal Society of Chemistry (RSC). - 1463-9084 .- 1463-9076. ; 23:42, s. 24478-24486
-
Tidskriftsartikel (refereegranskat)abstract
- Sodium transition metal oxides with a layered structure are one of the most widely studied cathode materials for Na+-ion batteries. Since the mobility of Na+ in such cathode materials is a key factor that governs the performance of material, electrochemical and muon spin rotation and relaxation techniques are here used to reveal the Na+-ion mobility in a P2-type Na0.5MgxNi0.17-xMn0.83O2 (x = 0, 0.02, 0.05 and 0.07) cathode material. Combining electrochemical techniques such as galvanostatic cycling, cyclic voltammetry, and the galvanostatic intermittent titration technique with mu+SR, we have successfully extracted both self-diffusion and chemical-diffusion under a potential gradient, which are essential to understand the electrode material from an atomic-scale viewpoint. The results indicate that a small amount of Mg substitution has strong effects on the cycling performance and the Na+ mobility. Amongst the tested cathode systems, it was found that the composition with a Mg content of x = 0.02 resulted in the best cycling stability and highest Na+ mobility based on electrochemical and mu+SR results. The current study clearly shows that for developing a new generation of sustainable energy-storage devices, it is crucial to study and understand both the structure as well as dynamics of ions in the material on an atomic level.
|
|
| 5. |
- Younesi, Reza, et al.
(författare)
-
Surface Characterization of the Carbon Cathode and the Lithium Anode of Li-O2 Batteries using LiClO4 or LiBOB salts
- 2013
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 5:4, s. 1333-1341
-
Tidskriftsartikel (refereegranskat)abstract
- The surface compositions of a MnO2 catalyst containing carbon cathode and a Li anode in a Li–O2 battery were investigated using synchrotron-based photoelectron spectroscopy (PES). Electrolytes comprising LiClO4 or LiBOB salts in PC or EC:DEC (1:1) solvents were used for this study. Decomposition products from LiClO4 or LiBOB were observed on the cathode surface when using PC. However, no degradation of LiClO4 was detected when using EC/DEC. We have demonstrated that both PC and EC/DEC solvents decompose during the cell cycling to form carbonate and ether containing compounds on the surface of the carbon cathode. However, EC/DEC decomposed to a lesser degree compared to PC. PES revealed that a surface layer with a thickness of at least 1–2 nm remained on the MnO2 catalyst at the end of the charged state. It was shown that the detachment of Kynar binder influences the surface composition of both the carbon cathode and the Li anode of Li–O2 cells. The PES results indicated that in the charged state the SEI on the Li anode is composed of PEO, carboxylates, carbonates, and LiClO4 salt.
|
|
| 6. |
- Asfaw, Habtom D., Dr. 1986-, et al.
(författare)
-
Bio-derived hard carbon nanosheets with high rate sodium-ion storage characteristics
- 2022
-
Ingår i: Sustainable Materials and Technologies. - : Elsevier. - 2214-9937. ; 32
-
Tidskriftsartikel (refereegranskat)abstract
- Biomass is a sustainable precursor of hard carbons destined for use in sodium-ion batteries. This study explores the synthesis of hard carbon nanosheets (HCNS) from oxidized cork and impact of synthesis temperature on the hard carbon characteristics. An increase in the carbonization temperature from 1000 to 1500 °C generally leads to lower BET specific surface areas (~55 to 20 m2 g−1) and d002 interlayer spacing (~ 4.0 to 3.7 Å). The effect of synthesis temperature is reflected in the initial coulombic efficiency (iCE) which increases from 72% at 1000 °C to 88% at 1500 °C, as a result of the decrease in surface area, and structural defects in the hard carbon as verified using Raman scattering. The impact of cycling temperature (~25, 30 and 55 °C) on the rate capability and long-term cycling is investigated using high precision coulometry cycler. For a galvanostatic test at 20 mA g−1 and ~ 25 °C, a reversible capacity of 276 mAh g−1 is observed with an iCE of ~88%. Increasing cycling temperature enhances the rate performance, but slightly lowers the iCE (~86% at 30 °C and ~ 81% at 55 °C). At 20 mA g−1, the reversible capacities obtained at 30 °C and 55 °C are on average ~ 260 and ~ 270 mAh g−1, respectively. For constant-current constant-voltage (CCCV) tests conducted at 30 °C, reversible capacities ranging from 252 to 268, 247–252, and 237–242 mAh g−1 can be obtained at 10, 100, and 1000 mA g−1, respectively. The respective capacities obtained at 55 °C are about 272–290, 260–279, and 234–265 mAh g−1 at 10, 100 and 1000 mA g−1. The applicability of the HCNS electrodes is eventually evaluated in full-cells with Prussian white cathodes, for which a discharge capacity of 152 mAh g−1 is obtained with an iCE of ~90%.
|
|
| 7. |
- Björklund, Erik, et al.
(författare)
-
Influence of state-of-charge in commercial LiNi0.33Mn0.33Co0.33O2/LiMn2O4-graphite cells analyzed by synchrotron-based photoelectron spectroscopy
- 2018
-
Ingår i: Journal of Energy Storage. - : Elsevier BV. - 2352-152X .- 2352-1538. ; 15, s. 172-180
-
Tidskriftsartikel (refereegranskat)abstract
- Degradation mechanisms in 26 Ah commercial Li-ion battery cells comprising graphite as the negative electrode and mixed metal oxide of LiMn 2 O 4 (LMO) and LiNi 1/3 Mn 1/3 Co 1/3 O 2 (NMC) as the positive electrode are here investigated utilising extensive cycling at two different state-of-charge (SOC) ranges, 10–20% and 60–70%, as well as post-mortem analysis. To better analyze these mechanisms electrochemically, the cells were after long-term cycling reassembled into laboratory scale “half-cells” using lithium metal as the negative electrode, and thereafter cycled at different rates corresponding to 0.025 mA/cm 2 and 0.754 mA/cm 2 . The electrodes were also analyzed by synchrotron-based hard x-ray photoelectron spectroscopy (HAXPES) using two different excitation energies to determine the chemical composition of the interfacial layers formed at different depth on the respective electrodes. It was found from the extensive cycling that the cycle life was shorter for the cell cycled in the higher SOC range, 60–70%, which is correlated to findings of an increased cell resistance and thickness of the SEI layer in the graphite electrode as well as manganese dissolution from the positive electrode.
|
|
| 8. |
- Brant, William, et al.
(författare)
-
Selective Control of Composition in Prussian White for Enhanced Material Properties
- 2019
-
Ingår i: Chemistry of Materials. - : AMER CHEMICAL SOC. - 0897-4756 .- 1520-5002. ; 31:18, s. 7203-7211
-
Tidskriftsartikel (refereegranskat)abstract
- Sodium-ion batteries based on Prussian blue analogues (PBAs) are ideal for large-scale energy storage applications due to the ability to meet the huge volumes and low costs required. For Na2-xFe[Fe(CN)(6)](1-y)center dot zH(2)O, realizing its commercial potential means fine control of the concentration of sodium, Fe(CN)(6) vacancies, and water content. To date, there is a huge variation in the literature of composition leading to variable electrochemical performance. In this work, we break down the synthesis of PBAs into three steps for controlling the sodium, vacancy, and water content via an inexpensive, scalable synthesis method. We produce rhombohedral Prussian white Na1.88(5)Fe[Fe-(CN)(6)]center dot 0.18(9)H2O with an initial capacity of 158 mAh/g retaining 90% capacity after 50 cycles. Subsequent characterization revealed that the increased polarization on the 3 V plateau is coincident with a phase transition and reduced utilization of the high-spin Fe(III)/Fe(II) redox couple. This reveals a clear target for subsequent improvements of the material to boost long-term cycling stability. These results will be of great interest for the myriad of applications of PBAs, such as catalysis, magnetism, electrochromics, and gas sorption.
|
|
| 9. |
|
|
| 10. |
- Younesi, S Reza, et al.
(författare)
-
Influence of the Cathode Porosity on the Discharge Performance of the Lithium-Oxygen Battery
- 2011
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753 .- 1873-2755. ; 196:22, s. 9835-9838
-
Tidskriftsartikel (refereegranskat)abstract
- By varying the ratio between the amount of carbon and Kynar binder in the cathode of a lithium-oxygen battery, it could be shown that an increasing amount of binder resulted in a decrease in the discharge capacity, mainly as a result of the decrease in the cathode porosity. It was shown that the Kynar binder blocked the majority of the pores with a width below 300 angstrom as determined by studying the pore volume and pore size distribution by nitrogen adsorption. Three carbonate based electrolytes (PC, PC:DEC (1:1), and EC:DEC (2:1) with 1 M LiPF(6)) were tested with the various cathode film compositions. Generally, the PC:DEC and EC:DEC based electrolytes provided higher capacities than PC. The results indicated that the air electrode composition and its effect on the porosity of the cathode, as well as electrolyte properties, are important when optimizing the discharge capacity.
|
|
