| 1. |
- Khanzadi, M Reza, 1983
(författare)
-
Modeling and Estimation of Phase Noise in Oscillators with Colored Noise Sources
- 2013
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The continuous increase in demand for higher data rates due to applications with massive number of users motivates the design of faster and more spectrum efficient communication systems. In theory, the current communication systems must be able to operate close to Shannon capacity bounds. However, the real systems perform below capacity limits, mainly due to channel estimation error and hardware impairments that have been neglected by idealistic or simplistic assumptions on the imperfections. Oscillator phase noise is one of the hardware impairments that is becoming a limiting factor in high data rate digital communication systems. Phase noise severely limits the performance of systems that employ dense constellations. Moreover, the level of phase noise (at a given off-set frequency) increases with carrier frequency which means that the problem of phase noise may be even more severe in systems with high carrier frequency.The focus of this thesis is on finding accurate statistical models of phase noise, as well as the design of efficient algorithms to mitigate the effect of this phenomenon on the performance of modern communication systems. First we derive the statistics of phase noise with white and colored noise sources in free-running and phase-locked-loop-stabilized oscillators. We investigate the relation between real oscillator phase noise measurements and the performance of communication systems by means of the proposed model. Our findings can be used by hardware and frequency generator designers to better understand the effect of phase noise with different sources on the system performance and optimize their design criteria respectively. Then, we study the design of algorithms for estimation of phase noise with colored noise sources. A soft-input maximum a posteriori phase noise estimator and a modified soft-input extended Kalman smoother are proposed. The performance of the proposed algorithms is compared against that of those studied in the literature, in terms of mean square error of phase noise estimation, and symbol error rate of the considered communication system. The comparisons show that considerable performance gains can be achieved by designing estimators that employ correct knowledge of the phase noise statistics. The performance improvement is more significant in low-SNR or low-pilot density scenarios.
|
|
| 2. |
- Nopchinda, Dhecha, 1991
(författare)
-
mm-Wave Data Transmission and Measurement Techniques: A Holistic Approach
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The ever-increasing demand on data services places unprecedented technical requirements on networks capacity. With wireless systems having significant roles in broadband delivery, innovative approaches to their development are imperative. By leveraging new spectral resources available at millimeter-wave (mm-wave) frequencies, future systems can utilize new signal structures and new system architectures in order to achieve long-term sustainable solutions. This thesis proposes the holistic development of efficient and cost-effective techniques and systems which make high-speed data transmission at mm-wave feasible. In this paradigm, system designs, signal processing, and measurement techniques work toward a single goal; to achieve satisfactory system level key performance indicators (KPIs). Two intimately-related objectives are simultaneously addressed: the realization of efficient mm-wave data transmission and the development of measurement techniques to enable and assist the design and evaluation of mm-wave circuits. The standard approach to increase spectral efficiency is to increase the modulation order at the cost of higher transmission power. To improve upon this, a signal structure called spectrally efficient frequency division multiplexing (SEFDM) is utilized. SEFDM adds an additional dimension of continuously tunable spectral efficiency enhancement. Two new variants of SEFDM are implemented and experimentally demonstrated, where both variants are shown to outperform standard signals. A low-cost low-complexity mm-wave transmitter architecture is proposed and experimentally demonstrated. A simple phase retarder predistorter and a frequency multiplier are utilized to successfully generate spectrally efficient mm-wave signals while simultaneously mitigating various issues found in conventional mm-wave systems. A measurement technique to characterize circuits and components under antenna array mutual coupling effects is proposed and demonstrated. With minimal setup requirement, the technique effectively and conveniently maps prescribed transmission scenarios to the measurement environment and offers evaluations of the components in terms of relevant KPIs in addition to conventional metrics. Finally, a technique to estimate transmission and reflection coefficients is proposed and demonstrated. In one variant, the technique enables the coefficients to be estimated using wideband modulated signals, suitable for implementation in measurements performed under real usage scenarios. In another variant, the technique enhances the precision of noisy S-parameter measurements, suitable for characterizations of wideband mm-wave components.
|
|
| 3. |
- Zhang, Kewei, et al.
(författare)
-
Protecting GNSS Open Service-Navigation Message Authentication against Distance-Decreasing Attacks
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- As the security of global navigation satellite systems (GNSS) for civilian usage is increasingly important, navigation message authentication (NMA) significantly improves resilience to spoofing attacks. However, not all attacks can be effectively countered: a strong variant of replay/relay attacks, distance-decreasing (DD) attacks, can shorten pseudorange measurements, without manipulating the cryptographically protected navigation message, thus manipulating the position, velocity, and time solution undetected. First, we discuss how DD attacks can tamper with GNSS signals, demonstrating the attack effectiveness on a recorded Galileo signal. DD attacks might introduce bit errors to the forged signals, but the adversary can keep this error rate very low with proper attack parameter settings. Then, based on our mathematical model of the prompt correlator output of the tracking phase at the victim receiver, we find that the correlator output distribution changes in the presence of DD attacks. This leads us to apply hypothesis testing to detect DD attacks, notably a Goodness of Fit (GoF) test and a generalized likelihood ratio test (GLRT), depending on the victim’s knowledge on the DD attacks. Monte Carlo simulations are used to evaluate the detection probability and the receiver operating characteristic (ROC) curves for two tests, for different adversary configuration and noise settings. Then, we evaluate the effectiveness of the GoF and GLRT tests with a synthesized DD signal. Both tests can detect DD attacks with similar performance in high signal-to-noise ratio (SNR) environments. The GLRT detection probability is approximately 20% higher than that of the GoF test in low SNR environments.
|
|
| 4. |
- Blanch, Krister, 1991
(författare)
-
Beyond-application datasets and automated fair benchmarking
- 2023
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Beyond-application perception datasets are generalised datasets that emphasise the fundamental components of good machine perception data. When analysing the history of perception datatsets, notable trends suggest that design of the dataset typically aligns with an application goal. Instead of focusing on a specific application, beyond-application datasets instead look at capturing high-quality, high-volume data from a highly kinematic environment, for the purpose of aiding algorithm development and testing in general. Algorithm benchmarking is a cornerstone of autonomous systems development, and allows developers to demonstrate their results in a comparative manner. However, most benchmarking systems allow developers to use their own hardware or select favourable data. There is also little focus on run time performance and consistency, with benchmarking systems instead showcasing algorithm accuracy. By combining both beyond-application dataset generation and methods for fair benchmarking, there is also the dilemma of how to provide the dataset to developers for this benchmarking, as the result of a high-volume, high-quality dataset generation is a significant increase in dataset size when compared to traditional perception datasets. This thesis presents the first results of attempting the creation of such a dataset. The dataset was built using a maritime platform, selected due to the highly dynamic environment presented on water. The design and initial testing of this platform is detailed, as well as as methods of sensor validation. Continuing, the thesis then presents a method of fair benchmarking, by utilising remote containerisation in a way that allows developers to present their software to the dataset, instead of having to first locally store a copy. To test this dataset and automatic online benchmarking, a number of reference algorithms were required for initial results. Three algorithms were built, using the data from three different sensors captured on the maritime platform. Each algorithm calculates vessel odometry, and the automatic benchmarking system was utilised to show the accuracy and run-time performance of these algorithms. It was found that the containerised approach alleviated data management concerns, prevented inflated accuracy results, and demonstrated precisely how computationally intensive each algorithm was.
|
|
| 5. |
- Jang, Jeong Keun, et al.
(författare)
-
Area-efficient scheduling scheme based FFT processor for various OFDM systems
- 2018
-
Ingår i: 2018 IEEE ASIA PACIFIC CONFERENCE ON CIRCUITS AND SYSTEMS (APCCAS 2018). - : IEEE. - 9781538682401 ; , s. 338-341
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- This paper presents an area-efficient fast Fouriertransform (FFT) processor for orthogonal frequency-division multiplexing systems based on multi-path delay commutator architecture. This paper proposes a data scheduling scheme to reduce the number of complex constant multipliers. The proposed mixed-radix multi-path delay commutator FFT processor can support 128-, 256-, and 512-point FFT sizes. The proposed processor was synthesized using the Samsung 65-nm CMOS standard cell library. The proposed processor with eight parallel data paths can achieve a high throughput rate of up to 2.64 GSample/s at 330 MHz.
|
|
| 6. |
- Grabowski, Alexander, 1993
(författare)
-
VCSEL Equivalent Circuits and Silicon Photonics Integration
- 2022
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The vertical-cavity surface-emitting laser (VCSEL) is a light source of great importance for numerous industrial and consumer products. The main application areas are datacom and sensing. The datacom industry uses GaAs-based VCSELs for optical interconnects, the short-reach fiber optical communication links used to transfer large amounts of data at high rates between units within data centers and supercomputers. In the area of sensing, VCSELs are largely used in consumer products such as smart phones (e.g. face ID and camera auto focus), computer mice, and automobiles (e.g. gesture recognition and LIDAR for autonomous driving). In this work, an advanced physics-based equivalent circuit model for datacom VCSELs has been developed. The model lends itself to co-design and co-optimization with driver and receiver ICs, thereby enabling higher data rate transceivers with bandwidth limited VCSELs and photodiodes. The model also facilitates an understanding of how each physical process within the VCSEL affects the VCSEL static and dynamic performance. It has been applied to study the impact of carrier transport and capture on VCSEL dynamics. The work also includes micro-transfer-printing of GaAs-based single-mode VCSELs on silicon nitride photonic integrated circuits (PICs). Such PICs are increasingly used for e.g. compact and highly functional bio-photonic sensors. Transfer printing of VCSELs enables the much-needed on-PIC integration of power efficient light sources. The bottom-emitting VCSELs are printed above grating couplers on the PIC and optical feedback is used to control the polarization for efficient coupling to the silicon nitride waveguide. Wavelength tuning, as required by the bio-sensing application, is achieved by direct current modulation.
|
|
| 7. |
- Gustavsson, Ulf, 1975
(författare)
-
From Noise-Shaped Coding to Energy Efficiency - One bit at the time
- 2011
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Three parameters that drive the research and development of future RF transmitter technologies for high speed wireless communication today are energy efficiency, flexibility and reduction of the physical footprint. This thesis treats the use of single-bit quantization in conjunction with a method called Noise-Shaped Coding (NSC), as an enabler for these parameters, foremost in terms of energy efficiency.The first part of the thesis provides a short introduction to the common Radio Frequency Power Amplifier (RFPA) power efficiency enhancement techniques. The pulsed RF transmitter is introduced in which the RFPA is used as a switch, modulated by a single-bit quantized signal which allows it to operate solely at its two most efficient states.The second part of the thesis provides an introduction to the concept of NSC and the underlying idea of how high signal quality can be achieved with one bit quantization of the signal amplitude. A particular method of implementing NSC, namely the ΣΔ-modulator, is introduced and some common methods for design and analysis are discussed. An optimization-based approach to ΣΔ-modulator design is proposed and benchmarked against conventional methods in terms of its ability to shape the power spectral density of the quantization noise according to a given reconstruction filter response, minimizing the reconstructed error metric.The third and final part of the thesis focuses specifically on the application of ΣΔ-modulation in a pulsed RF transmitter context. The concepts of band-pass and baseband ΣΔ-modulation are introduced. A few important challenges related to the use of ΣΔ-modulation in a pulsed RF-transmitter context are identified. A ΣΔ-modulator topology which handles a complex input signal is investigated in great detail and advantages compared to conventional methods for using ΣΔ-modulation are unveiled by means of theoretical analysis and simulations. A method for suppressing the quantization noise within a frequency band surrounding the modulated RF carrier, enabling the use of more wideband reconstruction filter and moderate pulse-rates, is also presented. A detailed theoretical analysis reveals how optimized Noise-Shaped Coding, as provided by the optimization method introduced in the second part, can be deployed in order to improve the system performance. Finally, the method is validated by experimental measurements on two different high efficiency RFPAs at 1 and 3.5 GHz respectively, showing promising results.
|
|
| 8. |
- Kersten, Anton, 1991
(författare)
-
Modular Battery Systems for Electric Vehicles based on Multilevel Inverter Topologies - Opportunities and Challenges
- 2021
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Modular battery systems based on multilevel inverter (MLI) topologies can possibly overcome some shortcomings of two-level inverters when used for vehicle propulsion. The results presented in this thesis aim to point out the advantages and disadvantages, as well as the technical challenges, of modular vehicle battery systems based on MLIs in comparison to a conventional, two-level IGBT inverter drivetrain. The considered key aspects for this comparative investigation are the drive cycle efficiency, the inverter cost, the fault tolerance capability of the drivetrain and the conducted electromagnetic emissions. Extensive experiments have been performed to support the results and conclusions. In this work, it is shown that the simulated drive cycle efficiency of different low-voltage-MOSFET-based, cascaded seven-level inverter types is improved in comparison to a similarly rated, two-level IGBT inverter drivetrain. For example, the simulated WLTP drive cycle efficiency of a cascaded double-H-bridge (CDHB) inverter drivetrain in comparison to a two-level IGBT inverter, when used in a small passenger car, is increased from 94.24% to 95.04%, considering the inverter and the ohmic battery losses. In contrast, the obtained efficiency of a similar rated seven-level cascaded H-bridge (CHB) drivetrain is almost equal to that of the two-level inverter drivetrain, but with the help of a hybrid modulation technique, utilizing fundamental selective harmonic elimination at lower speeds, it could be improved to 94.85%. In addition, the CDHB and CHB inverters’ cost, in comparison to the two-level inverter, is reduced from 342€ to 202€ and 121€, respectively. Furthermore, based on a simple three-level inverter with a dual battery pack, it is shown that MLIs inherently allow for a fault tolerant operation. It is explained how the drivetrain of a neutral point clamped (NPC) inverter can be operated under a fault condition, so that the vehicle can drive with a limited maximum power to the next service station, referred to as limp home mode. Especially, the detection and localization of open circuit faults has been investigated and verified through simulations and experiments. Moreover, it is explained how to measure the conducted emissions of an NPC inverter with a dual battery pack according to the governing standard, CISPR 25, because the additional neutral point connection forms a peculiar three-wire DC source. To separate the measured noise spectra into CM, line-DM and phase-DMquantities, two hardware separators based on HF transformers are developed and utilized. It is shown that the CM noise is dominant. Furthermore, the CM noise is reduced by 3dB to 6dB when operating the inverter with three-level instead of two-level modulation.
|
|
| 9. |
- Bengtsson, Lars, 1963
(författare)
-
Mikrodatorteknik
- 1995
-
Bok (övrigt vetenskapligt/konstnärligt)abstract
- Första delen behandlar Microchips "Base-line"-kretsar och andra delen behandlar "Midrange"-kretsarna. De flesta funktioner belyses med konstruktionsexempel. Exempel och övningar är mycket hårdvarunära och boken behandlar konstruktion av mikrodatorer från grunden. Boken är avsedd för kurser i mikrodatorteknik på högskolan eller annan högre teknisk utbildning, men kan även användas som självstudiematerial eftersom de flesta exempel ges med detaljerade och verifierade lösningar av såväl hård- som mjukvaran. Tidigare erfarenhet av assemblerprogrammering är inte nödvändig men grundläggande kunskaper i digitalteknik förutsätts. Boken kan med fördel också läsas av rutinerade assemblerprogrammerare som vill veta hur prestanda hos de nya RISC-baserade PIC-controllerna står sig i konkurrensen med de mer etablerade enchipscontrollerna, t ex HC11 och 8751, som bygger på traditionell CISC-arkitektur.
|
|
| 10. |
- Bencivenni, Carlo, 1986
(författare)
-
Aperiodic Array Synthesis for Telecommunications
- 2017
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Arrays of antennas offer important advantages over single-element antennas and are thus a key part of most advanced communication systems. The majority of current arrays are based on a classical regular layout, which offer simple design criteria despite some limitations. Aperiodic arrays can reduce the number of elements and improve the performance, however their design is far more challenging. This thesis focuses on the synthesis of aperiodic arrays, advancing the state-of-the-art of phased arrays and pioneering the application to Multiple-Input Multiple-Output (MIMO) systems.In satellite communications (SATCOM), aperiodic sparse arrays have the potential for drastically reducing the costs of massive antennas. Most available synthesis methods are however either intractable, suboptimal or limited for such demanding scenarios. We propose a deterministic and efficient approach based on Compressive Sensing, capable of accounting for electromagnetic phenomena and complex specifications. Some of the key contributions include the extension to the design of multi-beam, modular, multi-element, reconfigurable and isophoric architectures.The same approach is successfully applied to the design of compact arrays for Point-to-Point (PtP) backhauling. The aperiodicity is used here instead to reduce the side lobes and meet the target radiation envelope with high aperture efficiency. A dense, column arranged, slotted waveguide isophoric array has been successfully designed, manufactured and measured.Line-of-Sight (LoS) MIMO can multiply the data rates of classical Single-Input Single-Output (SISO) backhauling systems, however it suffers from limited installation flexibility. We demonstrate how aperiodic arrays and their switched extensions can instead overcome this shortcoming. Since a small number of antennas are typically used, an exhaustive search is adopted for the synthesis.Massive Multi-User (MU) MIMO is envisioned as a key technology for future 5G systems. Despite the prevailing understanding, we show how the MIMO performance is affected by the array layout. To exploit this, we propose a new hybrid statistical-density tapered synthesis approach. Results show a significant improvement in minimum power budget, capacity and amplifier efficiency, especially for massive and/or crowded systems
|
|
